<div>The Abbot Point to Hydrographers Passage bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the RV Escape during the period 6 Oct 2020 – 16 Mar 2021. This was a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Point through Hydrographers Passage QLD. Bathymetry data was acquired using a Kongsberg EM 2040, and processed using QPS QINSy. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

This resource includes bathymetry data acquired by Geoscience Australia bathymetry survey during the period of 21 September and 17 October 2011 onboard the RV Southern Surveyor using a Kongsberg Maritime EM300 multibeam sonar. The SS2011-V05/ GA-0332/20110018S bathymetry survey was led by Dr. Andrew Jones (Geoscience Australia). The primary objectives of the survey were to map the spatial distribution of seepage sites and characterise the nature of the seepage at these sites (gas vs oil, macroseepage vs microseepage; palaeo vs modern day seepage) on the basis of: acoustic signatures in the water column, shallow subsurface and on the seabed; geochemical signatures in rock and sediment samples and the water column; and biological signatures on the seabed. This dataset contains a 32 and 15m-resolution, 32-bit floating point GeoTIFF grid files of the bathymetry in the study area, derived from the processed EM300 bathymetry data, using CARIS HIPS and SIPS software. Those grids were projected to WGS84 UTM 49S and 50S. Vertical Datum: MSL This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

Geoscience Australia conducted a marine seismic survey (GA-0349) over poorly defined areas of the Houtman sub-basin (part of the Perth basin) between 15th of November to the 23rd of January 2015. The aim was to acquire high quality, industry-standard precompetitive 2D seismic data, Multi-beam echo-sounder (MBES) off the coast of Western Australia. The new seismic data will supplement existing geological knowledge of the region, underpin petroleum prospectivity evaluation and support the discovery of new oil gas resources.<p><p>This dataset is not to be used for navigational purposes.

The GMRT-AusSeabed project aims to address the cost associated with processing, merging and reformatting of bathymetric data in marine modelling and management. This will be achieved by adopting and expanding the Global Multi-Resolution Topography Synthesis (GMRT) tool and becoming a local platform node focused on Australia’s region of marine responsibility. The GMRT is operated by Lamont Doherty Earth Observatory and funded by the US National Science Foundation. The implementation of GMRT for Australia is supported by funding from the Australian Research Data Commons (ARDC). One of the main deliverables for the project is a user needs analysis, which will inform the design of the platform. This report presents a summary of the outcomes of the engagement with the ocean and coastal modelling community to ensure the solutions are fit-for-purpose. The initial project plan included a proposal for in-person workshop with the modelling community to establish user requirements, however COVID-19 restrictions were in place during the project and this was not possible. Instead, requirements were gathered from the community via an online survey. An overview of the survey questions and responses is presented in Section 2, while Section 3 provides some further analysis of the results and recommendations for the design of the new platform.

The GMRT-AusSeabed project aims to address the cost associated with processing, merging and reformatting of bathymetric data in marine modelling and management by enabling users to more easily create bathymetric maps. The project leverages two major existing initiatives, the AusSeabed Data Hub operated by AusSeabed and the Global Multi-Resolution Topography Synthesis (GMRT) operated by Lamont Doherty Earth Observatory (LDEO) and funded by the US National Science Foundation. GMRT-AusSeabed is seeking to deliver two core services that are relevant to this particular document: 1. Definition of an attributed point cloud for bathymetric data that is common across a wide range of bathymetric sensor platforms (multibeam echosounder, LiDAR, satellite, etc) 2. Develop additional user controls, primarily relating to data selection, that leverage the attributed point cloud for the creation of bathymetric maps. Within the bounds of the GMRT-AusSeabed project, this document provides: 1. A summary of the key points discussed within the second workshop, “Backend Storage”, 2. An overview of the toolkits being explored by the project for delivery of various capabilities 3. Outcomes and actions that are being moved forward with in the project. Workshop participants included representatives from Geoscience Australia, Australian Antarctic Division, University of Western Australia, and Guardian Geomatics. See <a href="https://www.ausseabed.gov.au/gmrt">https://www.ausseabed.gov.au/gmrt</a> for more information.

This resource includes bathymetry data acquired during the Tasman and Coral Seas survey using Kongsberg EM302 and EM710 multibeam sonar systems. The Tasman and Coral Seas bathymetry survey (FK201228/GA4868); also known as Pinging in the New Year: Mapping the Tasman and Coral Seas survey; was led by James Cook University and University of Queensland aboard the Schmidt Ocean Institute's research vessel Falkor from the 28th of December to the 25th of January 2021. The primary objective of the expedition was to map the seabed of the target area in the Tasman and Coral Seas that will support ocean research, management and sustainable economic development. Bathymetric maps are especially valuable for geoscience research, as the shape of the seafloor holds information about the tectonic movement and the formation of the Australian continent. Another objective was to survey seabirds, which are important indicators of ocean health and the data collected from the expedition are vital for informing management of the Coral Sea Marine Park. This V1 dataset contains one 64m resolution 32-bit floating point geotiff files of the Tasman and Coral Seas bathymetry survey area, derived from the processed EM302 and EM710 bathymetry data, using CARIS HIPS and SIPS software. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

This resource includes bathymetry data acquired during the Vernon Islands bathymetry survey collected by University of Queensland during the period 21 – 26 May 2019 on the charter vessel Lauri-j using Bathyswath interferometric sonar system. The survey was undertaken as a project of the Australian Tidal Energy (AUSTEn; http://austen.org.au/) co-funded by the Australian Renewable Energy Agency (ARENA) for the Advancing Renewables Program. The purpose of the project was to map the country’s tidal energy resource in unprecedented detail and assess its economic feasibility and ability to contribute to Australia’s energy needs. It will aid the emerging tidal energy industry to develop commercial-scale tidal energy projects. This dataset contains a 4m resolution 32-bit floating point geotiff file of the bathymetry in study area and transits, derived from the processed Bathyswath interferometric data, using Fledermaus. A final report of the project is provided in: Penesis, I et al. 2020. Tidal Energy in Australia: Assessing Resource and Feasibility in Australia’s Future Energy Mix (https://tethys-engineering.pnnl.gov/sites/default/files/publications/tidal-energy-in-australia-2020.pdf). This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

Geoscience Australia carried out marine surveys in southeast Tasmania in 2008 and 2009 (GA0315) to map seabed bathymetry and characterise benthic environments through observation of habitats using underwater towed video. Data was acquired using the Tasmania Aquaculture and Fisheries Institute (TAFI) Research Vessel Challenger. Bathymetric mapping was undertaken in seven survey areas, including: Freycinet Pensinula (83 sq km, east coast and shelf); Tasman Peninsula (117 sq km, east coast and shelf); Port Arthur and adjacent open coast (17 sq km); The Friars (41 sq km, south of Bruny Island); lower Huon River estuary (39 sq km); D Entrecastreaux Channel (7 sq km, at Tinderbox north of Bruny Island), and; Maria Island (3 sq km, western side). Video characterisations of the seabed concentrated on areas of bedrock reef and adjacent seabed in all mapped areas, except for D Entrecastreaux Channel and Maria Island. The dataset contains 8 bathymetry grids produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software. Please see the metadata informaiton for detailed information.

The AusSeabed Marine Data Portal provides openly accessible seabed data to users. This report details the results and recommendations following a community survey on the portals functionality and usability. The report informs future development of the AusSeabed Marine Data Portal to ensure it meets end-user needs.

The Tasmante bathymetry survey, GA-0125 was acquired by Geoscience Australia onboard the IFREMER N/O L'Atalante from the 12th of February to the 28th of March 1994 using a Simrad EM12 Dual sonar system. The objectives of the west Tasmanian swath-mapping cruise (Tasmante) are to: determine the structure of the continental margin off west Tasmania, on the South Tasman Rise, and on the adjacent abyssal plain; examine the relationships between lithospheric extension in continental crust, the orientation of the seafloor spreading phases, and the formation of the transform margin along west Tasmania and the South Tasman Rise; map sedimentary patterns and processes to build an understanding of Neogene changes in sedimentation and their relationship to tectonic and climatic. This dataset contains a 100m resolution 32-bit geotiff of the Tasmante survey, produced from the processed EM12D bathymetry data of the survey area using the CARIS HIPS and SIPS software. This dataset is published with the permission of the CEO, Geoscience Australia. Not to be used for navigational purposes.