From 1 - 10 / 127
  • Carbon capture and storage is a mitigation strategy that could rapidly reduce CO2 emissions from high emission sources. However, the exploration and assessment of reservoirs for the geological storage of CO2 is a complicated science commonly hampered by large uncertainties. The major hurdles lie in correctly assessing the prospectivity of basin plays, and ultimately of play fairways suitable for CO2 storage. On the North West Shelf of Australia, turbidite deposits are a common depositional system and many are considered prospective for CO2 storage in this emission intensive part of Australia. Using an integrated reservoir modelling approach, this study assessed the storage potential of the Caswell Fan turbidite in the Browse Basin, Western Australia. A detailed seismic interpretation utilising both 2D and 3D seismic and four previously drilled wells, provided the sequence stratigraphic framework for a detailed reservoir evaluation. The Fan was deposited in a basin floor fan setting within a lowstand systems tract, which provided optimal conditions for sequestration due to the sandstone's extended geometry, sorting, and high net-to-gross ratios, all overlain by a regional marine claystone seal. Through 3D static geological modelling it was determined that the Caswell Fan had an estimated storage capacity of approximately 300 million tonnes of CO2. This largely unconfined basin floor fan represents one of several plays along the North West Shelf of Australia, which could provide suitable CO2 storage formations for the carbon capture and storage industry.

  • Geoscience Australia undertook a marine survey of the Leveque Shelf (survey number SOL5754/GA0340), a sub-basin of the Browse Basin, in May 2013. This survey provides seabed and shallow geological information to support an assessment of the CO2 storage potential of the Browse sedimentary basin. The basin, located on the Northwest Shelf, Western Australia, was previously identified by the Carbon Storage Taskforce (2009) as potentially suitable for CO2 storage. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2 within reasonable distances of major sources of CO2 emissions. The principal aim of the Leveque Shelf marine survey was to look for evidence of any past or current gas or fluid seepage at the seabed, and to determine whether these features are related to structures (e.g. faults) in the Leveque Shelf area that may extend to the seabed. The survey also mapped seabed habitats and biota to provide information on communities and biophysical features that may be associated with seepage. This research, combined with deeper geological studies undertaken concurrently, addresses key questions on the potential for containment of CO2 in the basin's proposed CO2 storage unit, i.e. the basal sedimentary section (Late Jurassic and Early Cretaceous), and the regional integrity of the Jamieson Formation (the seal unit overlying the main reservoir). This dataset comprises sparker sub bottom profiles processed as shallow, high resolution, multichannel seismic reflection data (SEG-Y format), navigation files (P190) and stacking velocities.

  • The release of fluid to the seabed from deeper sources is a process that can influence seabed geomorphology and associated habitats, with pockmarks a common indicator. In May 2012, Geoscience Australia led a multidisciplinary marine survey in Joseph Bonaparte Gulf, to facilitate an assessment of the potential for fluid leakage associated with geological storage of CO2 at depth within the Petrel Sub-basin. Multibeam bathymetry and backscatter mapping (652 km2), combined with acoustic sub-bottom profiling (655 line-km) and geomorphological and sediment characterisation of the seabed was undertaken. Seabed geomorphic environments identified from 2 m resolution bathymetry include carbonate banks and ridges, palaeochannels, pockmark fields and fields of low amplitude hummocks. This paper focuses on pockmarks as indicators of fluid seepage from the subsurface. Three principal pockmark morphologies (Type I, II and III) are present with their distribution non-random. Small unit (Type I) depressions occur on plains and in palaeochannels, but are most commonly within larger (Type II) composite pockmarks on plains. Type III pockmarks, intermediate in scale, are only present in palaeochannels. The timing of pockmark formation is constrained by radiocarbon dating to 14.5 cal ka BP, or later, when a rapid rise in sea-level would have flooded much of outer Joseph Bonaparte Gulf. Our data suggest the principal source of fluids to the seabed is from the breakdown of organic material deposited during the last glacial maxima lowstand of sea-level, and presently trapped beneath marine sediments. These results assist in ameliorating uncertainties associated with potential CO2 storage in this region.

  • Atmospheric monitoring of CO2 geological storage has developed from a concept to reality over less than a decade. Measurements of atmospheric composition and surface to air fluxes are now being made at onshore test sites, pilot projects, operational projects and likely future storage regions around the world. The motivation for atmospheric monitoring is usually to detect potential leakage from CO2 storage activities that might affect health and safety or to test the efficacy of carbon capture and storage (CCS) as a climate mitigation option. We have focused on the mitigation requirement, which involves determining whether potential leakage is below a maximum acceptable rate. Climatic considerations suggest that the maximum leakage rate of stored CO2 should be very small, of the order of 0.01% of that stored per year, globally averaged. Monitoring operational CO2 storage sites to confirm that potential leakage to the atmosphere is below this rate and to locate and quantify the any leakage flux can be a challenge, mainly because of the large and variable CO2 concentrations and fluxes in ecosystems and urban environments. We have developed and assessed atmospheric techniques during field experiments, during 4 years of monitoring the CO2CRC Otway Project, and by using model simulations. From this experience we are able to make recommendations about suitable technologies and strategies to optimise the capability of atmospheric monitoring of CCS in different environments. Abstract for paper to be presented at CO2CRC Research Symposium 2010, 1-3 December 2010, Melbourne

  • In 2008, the Australian Parliament debated and passed the first national legislation to establish a title system of access and property rights for greenhouse gas (CO2) storage in offshore waters - the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (the Act). The Act provides for petroleum titles and greenhouse gas storage titles to coexist. To manage possible interactions between petroleum and CO2 storage operations, the Act introduced a test to determine whether activities under one title would pose a significant risk of a significant adverse impact (SROSAI test) on pre-existing rights and assets under the other title. Where petroleum and CO2 storage projects are proposed in the same area, the Act provides for commercial agreements between petroleum and CO2 storage proponents. It is only in the absence of any such commercial agreements that the regulator will have to decide whether an activity under one title would pose a significant risk of a significant adverse impact on the operations within the other title area. The SROSAI test is based on three core parameters: - the probability of the occurrence of an adverse impact; - the cost of the adverse impact on the project; and - the total resource value of the project. In estimating the cost of an adverse impact the regulator will take into consideration whether the adverse impact will result in: - any increase in capital or operating costs; - any reduction in rate of recovery of petroleum or rate of injection of CO2; - any reduction in the quantity of the petroleum to be recovered or CO2 stored. Safety and environmental impacts would be considered in estimating costs, only if those impacts would contribute to an increase in capital or operating costs, or reduction in petroleum recovery or CO2 injection. Etc

  • Identification of major hydrocarbon provinces from existing world assessments for hydrocarbon potential can be used to identify those sedimentary basins at a global level that will be highly prospective for CO2 storage. Most sedimentary basins which are minor petroleum provinces and many non-petroliferous sedimentary basins will also be prospective for CO2 storage. Accurate storage potential estimates will require that each basin be assessed individually, but many of the prospective basins may have ranges from high to low prospectivity. The degree to which geological storage of CO2 will be implemented in the future will depend on the geographical and technical relationships between emission sites and storage locations, and the economic drivers that affect the implementation for each source to sink match. CO2 storage potential is a naturally occurring resource, and like any other natural resource there will be a need to provide regional access to the better sites if the full potential of the technology is to be realized. Whilst some regions of the world have a paucity of opportunities in their immediate geographic confines, others are well endowed. Some areas whilst having good storage potential in their local region may be challenged by the enormous volume of CO2 emissions that are locally generated. Hubs which centralize the collection and transport of CO2 in a region could encourage the building of longer and larger pipelines to larger and technically more viable storage sites and so reduce costs due to economies of scale.

  • Atmospheric tomography is a monitoring technique that uses an array of sampling sites and a Bayesian inversion technique to simultaneously solve for the location and magnitude of a gaseous emission. Application of the technique to date has relied on air samples being pumped over short distances to a high precision FTIR Spectrometer, which is impractical at larger scales. We have deployed a network of cheaper, less precise sensors during three recent large scale controlled CO2 release experiments; one at the CO2CRC Ginninderra site, one at the CO2CRC Otway Site and another at the Australian Grains Free Air CO2 Enrichment (AGFACE) facility in Horsham, Victoria. The purpose of these deployments was to assess whether an array of independently powered, less precise, less accurate sensors could collect data of sufficient quality to enable application of the atmospheric tomography technique. With careful data manipulation a signal suitable for an inversion study can be seen. A signal processing workflow based on results obtained from the atmospheric array deployed at the CO2CRC Otway experiment is presented.

  • Abstract for submission to 11th IEA GHG International Conference on Greenhouse Gas Control Technologies. Conference paper to follow pending selection for oral or poster presentation. Abstract covers the GA-ACCA21 China Australia Geological Storage of CO2 (CAGS) Project run through PMD/ED 2009-2012.

  • In May 2013, Geoscience Australia (GA) and the Australian Institute of Marine Science (AIMS) undertook a collaborative seabed mapping survey (GA0340/ SOL5754) on the Leveque Shelf, a distinct geological province within the Browse Basin, offshore Western Australia. The purpose of the survey was to acquire geophysical and biophysical data on seabed environments over a previously identified potential CO2 injection site to better understand the overlying seabed habitats and to assess potential for fluid migration to the seabed. Mapping and sampling was undertaken across six areas using multibeam and single beam echosounders, sub-bottom profilers, sidescan sonar, underwater towed-video, gas sensors, water column profiler, grab samplers, and vibrocorer. Over 1070 km2 of seabed and water column was mapped using the multibeam and single beam echosounder, in water depths ranging between 40 and 120 m. The sub-surface was investigated using the multichannel and the parametric sub-bottom profilers along lines totalling 730 km and 1547 km in length respectively. Specific seabed features were investigated over 44 line km using the sidescan sonar and physically and sampled at 58 stations. Integration of this newly acquired data with existing seismic data will provide new insights into the geology of the Leveque Shelf. This work will contribute to the Australian Government's National CO2 Infrastructure Plan (NCIP) by providing key seabed environmental and geological data to better inform the assessment of the CO2 storage potential in this area of the Browse Basin. This dataset contains identifications of Polychaetes collected from 64 Smith-McIntyre grabs deployed during GA0340/SOL5754.