The Layered Geology of Australia web map service is a seamless national coverage of Australia’s surface and subsurface geology. Geology concealed under younger cover units are mapped by effectively removing the overlying stratigraphy (Liu et al., 2015). This dataset is a layered product and comprises five chronostratigraphic time slices: Cenozoic, Mesozoic, Paleozoic, Neoproterozoic, and Pre-Neoproterozoic. As an example, the Mesozoic time slice (or layer) shows Mesozoic age geology that would be present if all Cenozoic units were removed. The Pre-Neoproterozoic time slice shows what would be visible if all Neoproterozoic, Paleozoic, Mesozoic, and Cenozoic units were removed. The Cenozoic time slice layer for the national dataset was extracted from Raymond et al., 2012. Surface Geology of Australia, 1:1 000 000 scale, 2012 edition. Geoscience Australia, Canberra.

Mineral deposits are the products of lithospheric-scale processes. Imaging the structure and composition of the lithosphere is therefore essential to better understand these systems, and to efficiently target mineral exploration. Seismic techniques have unique sensitivity to velocity variations in the lithosphere and mantle, and are therefore the primary means available for imaging these structures. Here, we present the first stage of Geoscience Australia's passive seismic imaging project (AusArray), developed in the Exploring for the Future program. This includes generation of compressional (P) and shear (S) body-wave tomographic imaging models. Our results, on a continental scale, are broadly consistent with a priori expectations for regional lithospheric structure and the results of previously published studies. However, we also demonstrate the ability to resolve detailed features of the Australian lithospheric mantle underneath the dense seismic deployments of AusArray. Contrasting P- and S-wave velocity trends within the Tennant Creek – Mount Isa region suggest that the lithospheric root may have undergone melt-related alteration. This complements other studies, which point towards high prospectivity for iron oxide–copper–gold mineralisation in the region. <b>Citation: </b>Haynes, M.W., Gorbatov, A., Hejrani, B., Hassan, R., Zhao, J., Zhang, F. and Reading, A.M., 2020. AusArray: imaging the lithospheric mantle using body-wave tomography. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

This report presents groundwater levels results from the Howard East groundwater project in the Northern Territory (NT), conducted as part of Exploring for the Future (EFTF), an eight year, $225 million Australian Government funded geoscience data and information acquisition program focused on better understanding the potential mineral, energy and groundwater resources across Australia. The Howard East groundwater project is a collaborative study between Geoscience Australia and he Northern Territory Government’s Department of Environment and Natural Resources (DENR). It focuses on groundwater resources in the Howard East area, NT. This report describes a data release of groundwater levels and salinity information based on measurements collected in monitoring bores during the EFTF project. The full report includes: • A full description of how water levels in metres relative to Australian Height Datum (m AHD; where zero m AHD is an approximation of mean sea level) were calculated from manual dips and electronic data loggers for this project. • A series of tables in Appendix A containing sufficient information for each bore and datalogger file to reproduce the water levels reported in Appendix B and Appendix C. • A series of hydrographs in Appendix B showing how water levels (in m AHD) interpreted from manual dips and datalogger files varied during the EFTF project. • A series of electronic files in Appendix C that include - Data files from dataloggers in CSV file format that can be used with the information contained in this data release to regenerate the water levels shown on hydrographs in Appendix A. - Data files in CSV file format reporting the final water levels used to generate the hydrographs in Appendix B.

The Upper Burdekin Chloride Mass Balance Recharge web service depicts the recharge rates have been estimated at borehole locations in the Nulla and McBride basalt provinces. Using rainfall rates, rainfall chemistry and groundwater chemistry, the recharge rates have been estimated through the Chloride Mass Balance approach.

The Upper Burdekin Chloride Mass Balance Recharge web service depicts the recharge rates have been estimated at borehole locations in the Nulla and McBride basalt provinces. Using rainfall rates, rainfall chemistry and groundwater chemistry, the recharge rates have been estimated through the Chloride Mass Balance approach.

Waukarlycarly 1 is a stratigraphic well drilled in the southern part of the Canning Basin’s Waukarlycarly Embayment under Geoscience Australia’s Exploring for the Future program in collaboration with the Geological Survey of Western Australia to provide stratigraphic data for this poorly understood tectonic component. The well intersects a thin Cenozoic section, overlying Permian–Carboniferous fluvial clastics and glacial diamictites, with a thick pre-Carboniferous succession (855–2585 mRT) unconformably overlying the Neoproterozoic metasediments. Three informal siliciclastic intervals were defined based on the data from core lithology, well logs, fluid inclusions, chemical and mineral compositions; an Upper Sandstone (855–1348.1 mRT), a Middle Interval (1348.1–2443.4 mRT) and a Lower Sandstone (2443.4 –2585 mRT). The Middle Interval was further divided into six internal zones. Conventional methods were applied to interpret effective porosity, water saturation and elastic properties (Poisson’s ratio and Young’s modulus). Artificial neural network technology was employed on well logs to interpret the total organic carbon (TOC) content, pyrolysis products from the cracking of organic matter (S2), permeability, and mineral compositions. In the Upper Sandstone, average sandstone porosity and permeability are 17.9% and 464.5 mD and, 6.75 % and 10 mD in the Lower Sandstone. The Middle Interval claystone has an average porosity and permeability of 4.17 % and 0.006 mD, and average TOC content and S2 of 0.17 wt% and 0.047 mg HC/g rock with maximum values of 0.66 wt% and 0.46 mg HC/g rock. Average Poisson’s ratio and Young’s modulus of the claystone are 0.154 and 9.81 GPa. Correlations of mineral compositions, petrophysical, geomechanical and geochemical properties of the Middle Interval have been conducted. Young’s modulus and Poisson’s ratio are well correlated with the contents of key minerals, including Quartz, carbonates and TotalClay. Although TOC content is low at Waukarlycarly 1, hydrocarbon generation and migration have occurred elsewhere in the Waukarlycarly Embayment. The helium response just above the Neoproterozoic basement in the FIS profile is not associated with the hydrocarbon responses implying that these fluids have different sources.

Geoscience Australia’s Exploring for the Future Program is investigating the mineral, energy and groundwater resource potential of sedimentary basins and basement provinces in northern Australia and parts of South Australia. A key challenge in exploring Australian onshore sedimentary basins is that these are often areas with limited seismic data coverage to image the sub-surface structural and stratigraphic architecture. Consequently, well logs are often the main data sets that are used to understand the sub-surface geology. Where good seismic data coverage is available, a considerable amount of time is generally required to undertake an integrated interpretation of well and seismic data. The primary aim of this study is to develop a methodology for visualising the three-dimensional tectonostratigraphic architecture of sedimentary basins using just well data, which can then be used to quickly screen areas warranting more detailed studies of resource potential. A workflow is documented which generates three-dimensional well correlations using just well formation tops to visualise the regional structural and stratigraphic architecture of the Amadeus, Canning, Officer and Georgina basins in the Centralian Superbasin. A critical step in the workflow is defining regionally correlatable supersequences that show the spatial linkages and evolution through time of lithostratigraphic units from different basin areas. Thirteen supersequences are defined for the Centralian Superbasin, which were deposited during periods of regional subsidence associated with regional tectonic events. Regional three-dimensional correlation diagrams have been generated to show the spatial distribution of these supersequences, which can be used as a reconnaissance tool for visualising the distribution of key stratigraphic elements associated with petroleum, mineral and groundwater systems. Three-dimensional well correlations are used in this study to redefine the Centralian Superbasin as encompassing all western, northern and central Australian basins that had interconnected depositional systems driven by regional subsidence during one or more regional tectonic events between the Neoproterozoic and middle Carboniferous. The Centralian Superbasin began to form during a series of Neoproterozoic rift-sag events associated with the break-up of the Rodinia Supercontinent at about 830 Ma. Depositional systems in the Amadeus and Officer basins were partially disconnected by an emergent Musgrave Province during these early stages of superbasin evolution. Subsequent regional uplift and erosion of the superbasin occurred during the late Neoproterozoic–early Cambrian Petermann Orogeny. The Officer and Amadeus were permanently disconnected by the uplifted Musgrave Province following this major orogenic event. Rejuvenation of the Centralian Superbasin occurred during middle–late Cambrian extension and subsidence resulting in the generation of several new basins including the Canning Basin. Subsidence during the Ordovician Larapinta Event created an intracontinental seaway that episodically connected the Canning, Amadeus, Georgina and Officer basins to the proto-Pacific Ocean in the east. Fragmentation of the Centralian Superbasin began at the onset of the Alice Springs Orogeny during the Rodingan Event when the uplifted Arunta Region disconnected the Amadeus and Georgina basins. The Rodingan Movement initially disconnected depositional systems between the Canning and Amadeus basins, which promoted the development of a large evaporitic depocentre over the southern Canning Basin. However, these basins subsequently reconnected during the Early Devonian Prices Creek Movement. Complete fragmentation of the Centralian Superbasin occurred during the Late Devonian–middle Carboniferous Pillara Extension Event when the Canning and Amadeus basins became permanently disconnected. Widespread uplift and erosion at the culmination of the Alice Springs Orogeny in the middle Carboniferous resulted in final closure of the Centralian Superbasin.

This report presents a summary of the groundwater and surface water hydrochemistry data release from the Daly River project conducted as part of Exploring for the Future (EFTF)—an eight year, $225 million Australian Government funded geoscience data and information acquisition program focused on better understanding the potential mineral, energy and groundwater resources across Australia. This data release records the groundwater sample collection methods and hydrochemistry and isotope data from monitoring bores in the Daly River project area, Northern Territory (NT). The Daly River project is a collaborative study between Geoscience Australia and the NT Government. Hydrochemistry and isotope data were collected from existing bores in the Daly River area. The sampling methods, quality assurance/quality control procedures, analytical methods and results are included in this report and all hydrochemistry data are available for download from the link at right.

This report presents a summary of the groundwater and surface water hydrochemistry data release from the Howard East project conducted as part of Exploring for the Future (EFTF) —an eight year, $225 million Australian Government funded geoscience data and information acquisition program focused on better understanding the potential mineral, energy and groundwater resources across Australia. This data release records the groundwater and surface water sample collection methods and hydrochemistry and isotope data from monitoring bores in the Howard East project area, Northern Territory (NT). The Howard East project is a collaborative study between Geoscience Australia and the NT Government. Hydrochemistry and isotope data were collected from existing bores in the Howard East area. The sampling methods, quality assurance/quality control procedures, analytical methods and results are included in this report and all hydrochemistry data are available for download from the link at right.

The petroleum systems summary report provides a compilation of the current understanding of petroleum systems for the McArthur Basin, including the prospective Beetaloo Sub-basin. The contents of this report are also available via the Geoscience Australia Portal at https://portal.ga.gov.au/, called The Petroleum Systems Summary Assessment Tool (Edwards et al., 2020). Three summaries have been developed as part of the Exploring for the Future (EFTF) program (Czarnota et al., 2020); the McArthur Basin, the Canning Basin, and a combined summary of the South Nicholson Basin and Isa Superbasin region. The petroleum systems summary reports aim to facilitate exploration by summarising key datasets related to conventional and unconventional hydrocarbon exploration, enabling a quick, high-level assessment the hydrocarbon prospectivity of the region.