<p>Flythrough movie of Gifford Marine Park, which is located 700 km east of Brisbane, Australia. The park is situated about halfway along the Lord Howe Rise seamount chain on the western flank of the Lord Howe Rise. Seamounts along this chain formed from Miocene volcanism via a migrating magma source (“hotspot”) after the opening of the Tasman Sea. Two large, flat-topped volcanic seamounts dominate the park. Their gently sloping summits have accumulated veneers of sediment, which in places have formed fields of bedforms. Steep cliffs, debris and large mass movement scars encircle each seamount, and contrast with the lower gradient abyssal plains from which they rise. Spanning over 3 km of ocean depths, the seamounts are likely to serve multiple and important roles as breeding locations, resting areas, navigational landmarks or supplementary feeding grounds for some cetaceans (e.g. humpback whales, sperm whales). They may also act as important aggregation points for other highly migratory pelagic species. The bathymetry shown here was collected on two surveys - the first in 2007 by Geoscience Australia and the second in 2017 by Geoscience Australia in collaboration with the Japan Agency for Marine-Earth Science and Technology. The Gifford Marine Park has also been the focus of a study undertaken by the Marine Biodiversity Hub as part of the National Environmental Science Program. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.

<p>Bathymetry flythrough of Perth Canyon using data acquired by Schmidt Ocean Institute in 2015 on RV Falkor (University of Western Australia et al.). The flythrough highlights geomorphic features mapped by Geoscience Australia, including landslides, escarpments and bedform fields and biodiversity associated with the canyon (benthic and pelagic). Produced as a science communication product for the Marine Biodiversity Hub (National Environmental Science Program). <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.

<p>Australia has established a network of 58 marine parks within Commonwealth waters covering a total of 3.3 million square kilometres, or 40 per cent of our exclusive economic zone (excluding Australian Antarctic Territory). These parks span a range of settings, from near coastal and shelf habitats to abyssal plains. Parks Australia manages the park network through management plans that came into effect for all parks on 1 July 2018. Geoscience Australia is contributing to their management by collating and interpreting existing environmental data, and through the collection of new marine data. “Eco-narrative” documents are being developed for those parks, where sufficient information is available, delivering collations and interpretations of seafloor geomorphology, oceanography and ecology. Many of these interpretations rely on bathymetric grids and their derived products, including those in this data release. <p>Geoscience Australia has developed a new marine seafloor classification scheme, which uses the two-part seafloor mapping morphology approach of Dove et al (2016). This new scheme is semi-hierarchical and the first step divides the slope of the seafloor into three Morphological Surface categories (Plain, <2°; Slope, 2-10°; Escarpment, >10°). This classification was applied to the portion of the Beaman and Spinnocia (2018) 30 m grid within the marine park. <p>Beaman, R.J. and Spinoccia, M. (2018). High-resolution depth model for Northern Australia - 30 m. Geoscience Australia. <p>Dove, D., Bradwell, T., Carter, G., Cotterill, C., Gafeira, J., Green, S., Krabbendam, M., Mellet, C., Stevenson, A., Stewart, H., Westhead, K., Scott, G., Guinan, J., Judge, M. Monteys, X., Elvenes, S., Baeten, N., Dolan, M., Thorsnes, T., Bjarnadóttir, L., Ottesen, D. (2016). Seabed geomorphology: a twopart classification system. British Geological Survey, Open Report OR/16/001. 13 pages. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.

<p>This dataset provides the spatially continuous data of seabed gravel (sediment fraction >2000 µm), mud (sediment fraction < 63 µm) and sand content (sediment fraction 63-2000 µm) expressed as a weight percentage ranging from 0 to 100%, presented in 10 m resolution raster grids format and ascii text file.</p> <p>The dataset covers the eight areas in the Timor Sea region in the Australian continental EEZ.</p> <p>This dataset supersedes previous predictions of sediment gravel, mud and sand content for the basin with demonstrated improvements in accuracy. Accuracy of predictions varies with sediment types, with a VEcv = 71% for mud, VEcv = 72% sand and VEcv = 42% for gravel. Artefacts occur in this dataset as a result of noises associated predictive variables (e.g., horizontal and vertical lines resulted from predictive variables derived from backscatter data are the most apparent ones). To obtain the most accurate interpretation of sediment distribution in these areas, it is recommended that noises with backscatter data should be reduced and predictions updated.</p> <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.

<p>This dataset measures the mean decadal warming rates of the sea surface temperature (SST) in 58 Australian Marine Parks (with the exception of the Heard Island and McDonald Islands Marine Park) over the past 25 years (1992 to 2016). They are derived from the Sea Surface Temperature Atlas of the Australian Regional Seas (SSTAARS). The field of “trend_d” represents the linear SST trend for March 1992 to December 2016. The unit of the warming rates is Celsius degree/per decade. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.

<p>Australia has established a network of 58 marine parks within Commonwealth waters covering a total of 3.3 million square kilometres, or 40 per cent of our exclusive economic zone (excluding Australian Antarctic Territory). These parks span a range of settings, from near coastal and shelf habitats to abyssal plains. Parks Australia manages the park network through management plans that came into effect for all parks on 1 July 2018. Geoscience Australia is contributing to their management by collating and interpreting existing environmental data, and through the collection of new marine data. “Eco-narrative” documents are being developed for those parks, where sufficient information is available, delivering collations and interpretations of seafloor geomorphology, oceanography and ecology. Many of these interpretations rely on bathymetric grids and their derived products, including those in this data release. <p>Bathymetry grids <p>The bathymetry of the marine parks was created by compiling and processing Geoscience Australia’s bathymetry data holding gridded at the optimum resolution depending of the vessel’s sonar system. <p>The bathymetry of the park is illustrated by a panchromatic geotiff image, developed by combining the bathymetric data with a hillshade image. <p> Morphological Surfaces <p>Geoscience Australia has developed a new marine seafloor classification scheme, which uses the two-part seafloor mapping morphology approach of Dove et al (2016). This new scheme is semi-hierarchical and the first step divides the slope of the seafloor into three Morphological Surface categories (Plain, <2°; Slope, 2-10°; Escarpment, >10°). <p>Dove, D., Bradwell, T., Carter, G., Cotterill, C., Gafeira, J., Green, S., Krabbendam, M., Mellet, C., Stevenson, A., Stewart, H., Westhead, K., Scott, G., Guinan, J., Judge, M. Monteys, X., Elvenes, S., Baeten, N., Dolan, M., Thorsnes, T., Bjarnadóttir, L., Ottesen, D. (2016). Seabed geomorphology: a twopart classification system. British Geological Survey, Open Report OR/16/001. 13 pages. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.<p><p>This dataset is not to be used for navigational purposes.

<p>The dataset measures the long-term seasonal means of the chlorophyll a concentrations of ocean surface waters. They are derived from MODIS (aqua) images using NASA's SeaDAS image processing software. The monthly chlorophyll a images between July 2002 and December 2017 are used to calculate the means of the four austral seasons: winter (June, July, and August), spring (September, October and November), summer (December, January and February) and autumn (March, April and May). The extent of the dataset covers the entire Australian EEZ and surrounding waters (including the southern ocean). The unit of the dataset is mg/m3. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.

<p>The dataset measures the long-term seasonal variations of the sea surface temperature (SST) of ocean surface waters. They are derived from MODIS (aqua) images using NASA's SeaDAS image processing software. The monthly SST images between July 2002 and December 2017 are used to calculate the standard deviations of the four austral seasons: winter (June, July, and August), spring (September, October and November), summer (December, January and February) and autumn (March, April and May). The extent of the dataset covers the entire Australian EEZ and surrounding waters (including the southern ocean). The unit of the dataset is Celsius degree. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.

<p>The dataset measures the long-term seasonal means of the sea surface temperature (SST) of ocean surface waters. They are derived from MODIS (aqua) images using NASA's SeaDAS image processing software. The monthly SST images between July 2002 and December 2017 are used to calculate the means of the four austral seasons: winter (June, July, and August), spring (September, October and November), summer (December, January and February) and autumn (March, April and May). The extent of the dataset covers the entire Australian EEZ and surrounding waters (including the southern ocean). The unit of the dataset is Celsius degree. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.

<p>The dataset indicates the long-term overall primary productivity hotspots of ocean surface waters. They are derived from MODIS (aqua) images using NASA's SeaDAS image processing software. The monthly chlorophyll a images between July 2002 and August 2014 are used to identify the overall primary productivity hotspots. The extent of the dataset covers the entire Australian EEZ and surrounding waters (including the southern ocean). The value (between 0 and 1.0) of the dataset represents the likelihood of the location being a primary productivity hotspot. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.