Data and Publications Search  

Gifford Marine Park Bathymetry - 30m Resolution Grid  


Authors / CoAuthors

Abstract

<p>Australia has established a network of 58 marine parks within Commonwealth waters covering a total of 3.3 million square kilometres, or 40 per cent of our exclusive economic zone (excluding Australian Antarctic Territory). These parks span a range of settings, from near coastal and shelf habitats to abyssal plains. Parks Australia manages the park network through management plans that came into effect for all parks on 1 July 2018. Geoscience Australia is contributing to their management by collating and interpreting existing environmental data, and through the collection of new marine data. “Eco-narrative” documents are being developed for those parks, where sufficient information is available, delivering collations and interpretations of seafloor geomorphology, oceanography and ecology. Many of these interpretations rely on bathymetric grids and their derived products, including those in this data release. <p>Bathymetry grids <p>The bathymetry of the marine parks was created by compiling and processing Geoscience Australia’s bathymetry data holding gridded at the optimum resolution depending of the vessel’s sonar system. <p>The bathymetry of the park is illustrated by a panchromatic geotiff image, developed by combining the bathymetric data with a hillshade image. <p> Morphological Surfaces <p>Geoscience Australia has developed a new marine seafloor classification scheme, which uses the two-part seafloor mapping morphology approach of Dove et al (2016). This new scheme is semi-hierarchical and the first step divides the slope of the seafloor into three Morphological Surface categories (Plain, <2°; Slope, 2-10°; Escarpment, >10°). <p>Dove, D., Bradwell, T., Carter, G., Cotterill, C., Gafeira, J., Green, S., Krabbendam, M., Mellet, C., Stevenson, A., Stewart, H., Westhead, K., Scott, G., Guinan, J., Judge, M. Monteys, X., Elvenes, S., Baeten, N., Dolan, M., Thorsnes, T., Bjarnadóttir, L., Ottesen, D. (2016). Seabed geomorphology: a twopart classification system. British Geological Survey, Open Report OR/16/001. 13 pages. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.<p><p>This dataset is not to be used for navigational purposes.

Product Type

dataset

eCat Id

121193

Contact for the resource

  Custodian

Commonwealth of Australia (Geoscience Australia)  
Cnr Jerrabomberra Ave and Hindmarsh Dr
GPO Box 378
Canberra
ACT
2601
Australia

  Point of contact

 

Text

Digital Object Identifier

http://dx.doi.org/10.4225/25/5b3174bf2de9b

Keywords

( {1} )
  • HVC_144641
( Project )
  • AusSeabed
( {1} )
  • bathymetry
( {1} )
  • marine
( {1} )
  • bathymetry grid
( {1} )
  • marine data
( {1} )
  • National Environmental Science Program
( {1} )
  • Marine Biodiversity Hub
( Product )
  • Published_External

Publication Date

2018-06-25T23:05:12

Creation Date

2018-06-05T00:00:00

Security Constraints

Australian Government Security ClassificationSystem    

Classification - unclassified

Legal Constraints

Creative Commons Attribution 4.0 International Licence    

Access - license

Use - license

Status

Purpose

Not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia

Maintenance Information

asNeeded

Topic Category

geoscientificInformation

Series Information

Lineage

The Gifford Marine Park Bathymetry dataset was created by compiling GA's bathymetry data holding. The bathymetry consist of the following surveys: # Survey Name Vessel Multbeam system Institution 1- GA-0354_LordHoweRise2D_KR1605 RV_Kairei SeaBeam 2112 JAMSTEC 2- GA-0363_LordHoweRise2D_KR1715 RV_Kairei SeaBeam 2112 JAMSTEC 3- GA-1152_BrisbaneTonga_WEST06MV RV_Melville SeaBEam 2000 SIO 4- GA-2359_NorthFijiBasin_SS10/2004 RV_Southern_Surveyor EM300 CSIRO 5- GA-2411_NoumeaSydney_SST02/2006 RV_Southern_Surveyor EM300 CSIRO 6- GA-2418_DarWell_SO190 RV_Sonne EM120 IFMGEO 7- GA-2436_LHR_Gifford RV_Tangaroa EM300 NIWA 8- GA-4341_TownsvilleSuva_KM0703 RV_Kilo_Moana EM120 Uni. Of Hawaii The dataset was processed in the Geoscience Australia by Michele Spinoccia, using CARIS HIPS & SIPS ver 7.1.2. Metadata: - Grid resolution: 30 m - Number of grids: 1 - Total surface coverage: 5,005.03 km2 - Vertical Datum: MSL - Horizontal Datum: WGS84 UTM-57S - Use Limitation: This dataset is not to be used for navigational purposes. - This dataset is published with the permission of the CEO, Geoscience Australia Processing: 1. First a vessel configuration file was created where the co-ordinates of the motion sensor and DGPS antenna and patch test offsets were recorded. 2. A new project was then created and the vessel configuration file was attached to the project file. 3. The raw swath sonar data, for each line was then imported into the project and the vessel information assigned to the data. 4. The motion sensor, DGPS and heading data were then cleaned using a filter that averaged adjacent data to remove artefacts. 5. Different sound velocity profiles data for each block were attached to the corresponding raw swath sonar data files to correct the depths for changes in the speed of sound through the water column. 6. Then a new blank field area was defined that specified the geographic area of study and the co-ordinate system used. The co-ordinates for the study areas were WGS84 UTM-57S. 7. The data was cleaned by applying several filters that removed any remaining spikes in the bathymetry data using user defined threshold values. A visual inspection of the data for each line was then undertaken where artefacts and noisy data not removed by the filtering process were removed manually using Swath and subset editors modules of the Caris HIPS/SIPS software. 8. All the data for each bathymetric, motion sensor, DGPS, heading, tide and sound velocity profile data were merged to produce the final processed data file. A weighted grid of the processed data was then created for each Block. In GA the tide was applied to the grid to correct for tidal variations and velocity corrections were performed to correct for different artefacts and mismatches. 9. The processed data was finally exported as grids soundings or false coloured images for presentation and reporting and as final processed data in in ASCII XYZ as well as geotif formats at the optimum resolution the data can provide. 10.Using CARIS Base editor 4.1 the grids were exported as ESRI ASCII grid, then imported into ARC catalogue/info to create a raster file for the entire survey as well as Google Earth KMZ.

Parent Information

Extents

[-27.18, -25.99, 158.99, 159.68]

Reference System

Spatial Resolution

30m

Service Information

Associations

Downloads and Links

Download the data package  

Gifford Marine Park Bathymetry 2018 30m (tif) [24.06 MB]  

Source Information



  • Copyright
  • Privacy
  • Accessibility
  • Sitemap
  • Information Publication Scheme
  • Freedom of Information
Geoscience Australia acknowledges the traditional owners of the country throughout Australia and their continuing connection to land, sea and community. We pay our respect to them and their cultures and to the elders past and present.