This record presents new zircon U-Pb geochronological data, obtained via Sensitive High Resolution Ion Microprobe (SHRIMP) for eleven samples of plutonic and volcanic rocks from the Lachlan Orogen, and the New England Orogen. The work is part of an ongoing Geochronology Project (Metals in Time), conducted by the Geological Survey of New South Wales (GSNSW) and Geoscience Australia (GA) under a National Collaborative Framework (NCF) agreement, to better understand the geological evolution of New South Wales. The results herein (summarised in Table 1.1 and Table 1.2) correspond to zircon U-Pb SHRIMP analysis undertaken on GSNSW mineral systems projects for the reporting period July 2015-June 2016. Lachlan Orogen In the Lachlan Orogen, the age of 418.9 ± 2.5 Ma for the Babinda Volcanics is consistent with the accepted stratigraphy of its parent Kopyje Group, agrees with the ages of other I-type volcanic rocks within the Canbelego-Mineral Hill Volcanic Belt and indicates eruption and emplacement of this belt during a single event. The age of the Shuttleton Rhyolite Member (421.9 ± 2.7 Ma) of the Amphitheatre Group is compatible with recent U-Pb dating of the Mount Halfway Volcanics, which interfingers with the Amphitheatre Group (MacRae, 1987). The age is also similar to nearby S-type granite intrusions, which suggests that the limited eruptive volcanic activity in the region was accompanied by local coeval plutonism. The results for the Babinda Volcanics and Shuttleton Rhyolite Member, in conjunction with previous GA dating and other dating and studies (summarised in Downes et al., 2016) establishes that significant igneous activity occurred between ~423 and ~418 Ma within the Cobar region but comprised two compositionally distinct but broadly contemporaneous belts of volcanics and comagmatic granite intrusions. The new age for the unnamed quartz monzonite at Hobbs Pipe constrains the maximum age of the hosted gold mineralisation to 414.7 ± 2.6 Ma. The wide range in ages for granites along the Gilmore Suture suggests that mineralisation in this region is not necessarily constrained to a single short-lived event. The new age of 413.5 ± 2.3 Ma for volcanics at Yerranderie indicates that that the Bindook Volcanic Complex was erupted over a relatively short period, and also indicates that the epithermal mineralisation at Yerranderie was not genetically related to the host volcanics but probably to a younger rifting event in the east Lachlan. New England Orogen Four units were dated from the Clarence River Supersuite in the New England Orogen. All four are between 255 and 256 Ma, demonstrating that these granites are related chemically, spatially, and temporally. While these four ages are indistinguishable, the current age span for Clarence River Supersuite is more than 40 million years. This wide age range indicates that classification of granites into the Clarence River Supersuite needs further refinement. The new age for the Newton Boyd Granodiorite (252.8 ± 1.0 Ma) is similar to some previously dated units within the Herries Supersuite, but both the Herries Supersuite and Stanthorpe Supersuite (into which the Herries Supersuite was reclassified by Donchak, 2013) incorporate units with a broad range of ages: the age distribution for the Stanthorpe Supersuite spans 50 million years. Classification of granites in the New England Orogen in New South Wales is worth revisiting. Two units were dated from the Drake Volcanics, nominally in the Wandsworth Volcanic Group and indicate that the middle to upper section of the Drake Volcanics, including the mineralising intrusions, were emplaced within the space of 1-2 million years. These results support a genetic and temporal link between the Au-Ag epithermal mineralisation at White Rock and Red Rock and their host Drake Volcanic packages rather than to younger regional plutonism (i.e., Stanthorpe Supersuite) or volcanism (i.e., Wandsworth Volcanics). The almost 10 Ma gap between the Drake Volcanics and the next lowest units of the Wandsworth Volcanic Group supports the argument for considering the Drake Volcanics a distinct unit.

The Pre-Cenozoic Geology of South Australia, New South Wales and Victoria removes Cenozoic geology. It is largely based on (1) the 1:1,000,000 Surface Geology by Geoscience Australia (2012) for New South Wales; (2) the Victoria seamless geology (2014); and (3) solid geology layers of South Australia by the Geological Survey of South Australia (2016), plus interpretation in GA of potential filed geophysical datasets, particularly magnetic data. The South Australia solid geology layers available on SARIG were used for Archaean to Ordovician geology of the state. Post-Ordovician geology of South Australia were interpreted in GA using magnetic data. The 1:1,000,000 surface geology map of the Mount Painter Region by S.B. Hore (2015) was also used. Solid geology was produced with the aid of interpretation of magnetic data for that region. For the Murray Basin and surrounding areas drill hole data were used to determine the geology under cover. Because extents of drill hole intercepted geology are not know in most cases. Such geology are shown as tiny circular polygons. The author thanks a number of state and GA geologists for their inputs at various stages of the project, particularly those who reviewed the data.

<b>This data package is superseded by a second iteration presenting updates on 3D geological and hydrogeological surfaces across eastern Australia that can be accessed through </b><a href="https://dx.doi.org/10.26186/148552">https://dx.doi.org/10.26186/148552</a> The Australian Government, through the National Water Infrastructure Fund – Expansion, commissioned Geoscience Australia to undertake the project ‘Assessing the Status of Groundwater in the Great Artesian Basin’ (GAB). The project commenced in July 2019 and will finish in June 2022, with an aim to develop and evaluate new tools and techniques to assess the status of GAB groundwater systems in support of responsible management of basin water resources. While our hydrogeological conceptual understanding of the GAB continues to grow, in many places we are still reliant on legacy data and knowledge from the 1970s. Additional information provided by recent studies in various parts of the GAB highlights the level of complexity and spatial variability in hydrostratigraphic units across the basin. We now recognise the need to link these regional studies to map such geological complexity in a consistent, basin-wide hydrostratigraphic framework that can support effective long-term management of GAB water resources. Geological unit markers have been compiled and geological surfaces associated with lithostratigraphic units have been correlated across the GAB to update and refine the associated hydrogeological surfaces. Recent studies in the Surat Basin in Queensland and the Eromanga Basin in South Australia are integrated with investigations from other regions within the GAB. These bodies of work present an opportunity to link regional studies and develop a revised, internally consistent geological framework to map geological complexity across the GAB. Legacy borehole data from various sources, seismic and airborne electromagnetic (AEM) data were compiled, then combined and analysed in a common 3D domain. Correlation of interpreted geological units and stratigraphic markers from these various data sets are classified using a consistent nomenclature. This nomenclature uses geological unit subdivisions applied in the Surat Cumulative Management Area (OGIA (Office of Groundwater Impact Assessment), 2019) to correlate time equivalent regional hydrogeological units. Herein we provide an update of the surface extents and thicknesses for key hydrogeological units, reconciling geology across borders and providing the basis for a consistent hydrogeological framework at a basin-wide scale. The new surfaces can be used for facilitating an integrated basin systems assessment to improve our understanding of potential impacts from exploitation of sub-surface resources (e.g., extractive industries, agriculture and injection of large volumes of CO2 into the sub-surface) in the GAB and providing a basis for more robust water balance estimates. This report is associated with a data package including (Appendix A – Supplementary material): • Nineteen geological and hydrogeological surfaces from the Base Permo-Carboniferous, Top Permian, Base Jurassic, Base Cenozoic to the surface (Table 2.1), • Twenty-one geological and hydrogeological unit thickness maps from the top crystalline basement to the surface (Figure 3.7 to Figure 3.27), • The formation picks and constraining data points (i.e., from boreholes, seismic, AEM and outcrops) compiled and used for gridding each surface (Table 3.8).

<p>This record presents new zircon and titanite U–Pb geochronological data, obtained via Sensitive High Resolution Ion Microprobe (SHRIMP) for twelve samples of plutonic and volcanic rocks from the Lachlan Orogen and the New England Orogen, and two samples of hydrothermal quartz veins from the Cobar region. Many of these new ages improve existing constraints on the timing of mineralisation in New South Wales, as part of an ongoing Geochronology Project (Metals in Time), conducted by the Geological Survey of New South Wales (GSNSW) and Geoscience Australia (GA) under a National Collaborative Framework (NCF) agreement. The results herein (summarised in Table 1.1 and Table 1.2) correspond to zircon and titanite U–Pb SHRIMP analysis undertaken on GSNSW mineral systems projects for the reporting period July 2016–June 2017. Lachlan Orogen <p>The Lachlan Orogen samples reported herein are sourced from operating mines, active prospects, or regions with historical workings. The new dates constrain timing of mineralisation by dating the units which host or crosscut mineralisation, thereby improving understanding of the mineralising systems, and provide stronger constraints for mineralisation models. <p>In the eastern Lachlan Orogen, the new dates of 403.9 ± 2.6 Ma for the Whipstick Monzogranite south of Bega, and 413.3 ± 1.8 Ma for the Banshea Granite north of Goulburn both provide maximum age constraints for the mineralisation they host (Whipstick gold prospect and Ruby Creek silver prospect, respectively). At the Paupong prospect south of Jindabyne, gold mineralisation is cut by a dyke with a magmatic crystallisation age of 430.9 ± 2.1 Ma, establishing a minimum age for the system. <p>The 431.1 ± 1.8 Ma unnamed andesite and the 428.4 ± 1.9 Ma unnamed felsic dyke at the Dobroyde prospect 10 km north of Junee are just barely distinguishable in age, in the order that is supported by field relationships. The andesite is the same age as the c. 432 Ma Junawarra Volcanics but has different geochemical composition, and is younger than the c. 437 Ma Gidginbung Volcanics. The two unnamed units pre-date mineralisation, and are consistent with Pb-dating indicating a Tabberaberran age for mineralisation at the Dobroyde gold deposit. <p>Similarly, the 430.5 ± 3.4 Ma leucogranite from Hickory Hill prospect (north of Albury) clarifies that this unit originally logged as Jindera Granite (since dated at 403.4 ± 2.6 Ma) is instead affiliated with the nearby Mount Royal Granite, which has implications for the extent of mineralisation hosted within this unit. <p>Cobar Basin <p>Titanite ages of 382.5 ± 2.6 Ma and 383.4 ± 2.9 Ma from hydrothermal quartz veins that crosscut and postdate the main phase of mineralisation at the Hera mine in the Cobar region constrain the minimum age for mineralisation. These ages are indistinguishable from a muscovite age of 381.9 ± 2.2 Ma interpreted to be related to late- or post-Tabberaberan deformation event, and these results indicate that mineralisation occurred at or prior to this deformation event. <p>New England Orogen <p>The new ages from granites of the New England Orogen presented in this record aid in classification of these plutons into various Suites and Supersuites, and these new or confirmed relationships are described in detail in Bryant (2017). Many of these plutons host mineralisation, so the new ages also provide maximum age constraints in the timing of that mineralisation. <p>The 256.1 ± 1.3 Ma age of the Deepwater Syenogranite 40 km north of Glen Innes indicates that it is coeval with the 256.4 ± 1.6 Ma (Black, 2006) Arranmor Ignimbrite Member (Emmaville Volcanics) that it intrudes, demonstrating that both intrusive and extrusive magmatism was occurring in the Deepwater region at the same time. The 252.0 ± 1.2 Ma age for the Black Snake Creek Granite northeast of Tenterfield is consistent with its intrusive relationship with the Dundee Rhyodacite (254.34 ± 0.34 Ma; Brownlow et al., 2010). Similarly, the 251.2 ± 1.3 Ma age for the Malara Quartz Monzodiorite southeast of Tenterfield is consistent with field relationships that demonstrate that it intrudes the Drake Volcanics (265.3 ± 1.4 Ma–264.4 ± 2.5 Ma, Cross and Blevin, 2010; Waltenberg et al., 2016). <p>The 246.7 ± 1.5 Ma Cullens Creek Granite north of Drake was dated in an attempt to provide a stronger age constraint on mineral deposits that also cut the Rivertree and Koreelan Creek plutons (249.1 ± 1.3 Ma and 246.3 ± 1.4 Ma respectively, Chisholm et al., 2014a). However, the new age is indistinguishable from the Koreelan Creek Granodiorite, and timing of mineralisation is not further constrained, but the new age demonstrates a temporal association between the Cullens Creek and Koreelan Creek plutons. <p>The 239.1 ± 1.2 Ma age for the Mann River Leucogranite west of Grafton is indistinguishable in age from plutons in the Dandahra Suite and supports its inclusion in this grouping. The new age also constrains the timing of the distal part of the Dalmorton Gold Field, and implies that the gold vein system postdates the Hunter-Bowen orogeny. <p>The 232.7 ± 1.0 Ma Botumburra Range Monzogranite east of Armidale is younger than most southern New England granites, but this age is very consistent with the Coastal Granite Association (CGA), and the new age, along with the previously noted petrographic similarities (Leitch and McDougall, 1979) supports incorporation of the Botumburra Range Monzogranite into the Carrai Supersuite of the CGA (Bryant, 2017).

<div>This report presents the findings of a study conducted in the upper Darling River floodplain, aimed at improving optical and interferometric synthetic aperture radar (InSAR) remote sensing products for groundwater dependant vegetation (GDV) characterisation. The research was part of the Upper Darling Floodplain (UDF) groundwater study, funded by the Exploring for the Future program.</div><div>This work tests the suitability of two novel remote sensing methods for characterising ecosystems with a range of likely groundwater dependence: combined wetness and greenness indices derived from Landsat products available through Geoscience Australia’s Digital Earth Australia platform, and an InSAR derived index of vegetation structure (known as SARGDE), which has been so far tested only in northern Australia. In addition, the relationship between the Normalised Difference Vegetation Index (NDVI), a remotely sensed proxy for vegetation condition, and water availability from surface water flows, rainfall, and groundwater was tested for sites with a range of low to high likely groundwater dependence.&nbsp;</div><div>The key findings of this work, and potential implications, are:</div><div>• A multiple lines of evidence approach, drawing on persistence of wetness/greenness and vegetation structure, and correlation between inferred vegetation condition and groundwater levels, gives high confidence in the groundwater dependence of parts of the floodplain, particularly within the riparian zone. These indices require calibration with ground condition data to be applied in different regions, but a combined index could provide a high confidence measure of groundwater dependence.</div><div>• Combined greenness and wetness, SARGDE, and the relationship between NDVI and groundwater levels all showed areas classified as ‘moderate’ likelihood of groundwater dependence having signatures comparable to areas classified as high likelihood. This could address a shortcoming of the groundwater dependence classification methodology, which, when groundwater level information is missing, classifies some vegetation types as moderate.</div><div>• A combined index taking into account both greenness and wetness was able to better delineate vegetation types with a range of groundwater dependence previously not achievable using remote sensing products.&nbsp;</div><div>This work has provided improved methodology for applying remote sensing products to groundwater dependent vegetation characterisation in the study area. The methods are likely to be applicable to other regions with groundwater dependent vegetation. The results add to the evidence that it is necessary to better integrate surface and groundwater resources in water sharing plans at a basin scale. Further work is required to quantify the frequency and magnitude of flow events required to replenish alluvial groundwater sufficiently to maintain existing groundwater dependent ecosystems.&nbsp;&nbsp;</div><div><br></div><div><br></div>

<div>This data package contains interpretations of airborne electromagnetic (AEM) conductivity sections in the Exploring for the Future (EFTF) program’s Eastern Resources Corridor (ERC) study area, in south eastern Australia. Conductivity sections from 3 AEM surveys were interpreted to provide a continuous interpretation across the study area – the EFTF AusAEM ERC (Ley-Cooper, 2021), the Frome Embayment TEMPEST (Costelloe et al., 2012) and the MinEx CRC Mundi (Brodie, 2021) AEM surveys. Selected lines from the Frome Embayment TEMPEST and MinEx CRC Mundi surveys were chosen for interpretation to align with the 20&nbsp;km line-spaced EFTF AusAEM ERC survey (Figure 1).</div><div>The aim of this study was to interpret the AEM conductivity sections to develop a regional understanding of the near-surface stratigraphy and structural architecture. To ensure that the interpretations took into account the local geological features, the AEM conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This approach provides a near-surface fundamental regional geological framework to support more detailed investigations. </div><div>This study interpreted between the ground surface and 500&nbsp;m depth along almost 30,000 line kilometres of nominally 20&nbsp;km line-spaced AEM conductivity sections, across an area of approximately 550,000&nbsp;km2. These interpretations delineate the geo-electrical features that correspond to major chronostratigraphic boundaries, and capture detailed stratigraphic information associated with these boundaries. These interpretations produced approximately 170,000 depth estimate points or approximately 9,100 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for compliance with Geoscience Australia’s (GA) Estimates of Geological and Geophysical Surfaces (EGGS) database, the national repository for standardised depth estimate points. </div><div>Results from these interpretations provided support to stratigraphic drillhole targeting, as part of the Delamerian Margins NSW National Drilling Initiative campaign, a collaboration between GA’s EFTF program, the MinEx CRC National Drilling Initiative and the Geological Survey of New South Wales. The interpretations have applications in a wide range of disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. It is anticipated that these interpretations will benefit government, industry and academia with interest in the geology of the ERC region.</div>

<div>Groundwater dependent ecosystems (GDEs) rely on access to groundwater on a permanent or intermittent basis to meet some or all of their water requirements (Richardson et al., 2011). The <a href="https://explorer-aws.dea.ga.gov.au/products/ga_ls_tc_pc_cyear_3">Tasselled Cap percentile products</a> created by Digital Earth Australia (2023) were used to identify potential GDEs for the upper Darling River floodplain study area. These percentile products provide statistical summaries (10th, 50th, 90th percentiles) of landscape brightness, greenness and wetness in imagery acquired between 1987 and present day. The 10th percentile greenness and wetness represent the lowest 10% of values for the time period evaluated, e.g. 10th greenness represents the least green period. In arid regions, areas that are depicted as persistently green and/or wet at the 10th percentile have the greatest potential to be GDEs. For this reason, and due to accessibility of the data, the 10th percentile Tasselled Cap greenness (TCG) and Tasselled Cap wetness (TCW) products were used as the basis for the assessment of GDEs for the upper Darling River floodplain study area. </div><div><br></div><div>This data release is an ESRI geodatabase, with layer files, including:</div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;original greenness and wetness datasets extracted; </div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;classified 10th percentile greenness and wetness datasets (used as input for the combined dataset); </div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;combined scaled 10th percentile greenness and wetness dataset (useful for a quick glance to identify potential groundwater dependent vegetation (GDV) that have high greenness and wetness e.g. river red gums)</div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;combined classified 10th percentile greenness and wetness dataset (useful to identify potential GDV/GDE and differentiate between vegetation types)</div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;coefficient of variation of 50th percentile greenness dataset (useful when used in conjunction with the scaled/combined products to help identify GDEs)</div><div><br></div><div>For more information and detail on these products, refer to <a href="https://dx.doi.org/10.26186/148545">https://dx.doi.org/10.26186/148545</a>.</div><div><br></div><div><strong>References</strong></div><div>Digital Earth Australia (2023). <em><a href="https://docs.dea.ga.gov.au">Digital Earth Australia User Guide</a></em>. </div><div>Richardson, S., E. Irvine, R. Froend, P. Boon, S. Barber, and B. Bonneville. 2011a. <em>Australian groundwater-dependent ecosystem toolbox part 1: Assessment framework.</em> Waterlines Report 69. Canberra, Australia: Waterlines.</div>

The East Australian Current (EAC) onshore encroachment drives coastal upwelling and shelf circulations, changes slope-shelf bio-physical dynamics, and consequently exerts significant influence on coastal marine ecosystem along the south-eastern Australian margin. The EAC is a highly dynamic eddy-current system which exhibits high-frequency intrinsic fluctuations and eddy shedding. As a result, low-frequency variability in the EAC is usually overshadowed and rarely detectable. For decades, despite many efforts into the ocean current observations, the seasonality of EAC’s shoreward intrusion remains highly disputable. In this study, for the first time we use a long-term (26 years) remotely sensed AVHRR Sea Surface Temperature (SST) dataset spanning 1992-2018 to map the EAC off the coast of northern New South Wales (NSW), between 28°S - 32.5°S. A Topographic Position Index (TPI) image processing technique was applied to conduct the quantitative mapping. The mapping products have enabled direct measurement (area and distance) of the EAC’s shoreward intrusion. Subsequent spatial and temporal analyses have shown that the EAC move closer to the coast in austral summer and autumn than in austral winter, with the mean distance-to-coast ~6 km shorter and occupying the shelf area ~12% larger. This provides quantitative and direct evidence of the seasonality of the EAC’s shoreward intrusion. Such seasonal migration pattern of the EAC thus provides new insights into the seasonal upwelling and shelf circulations previously observed in this region. As a result, we were able to confirm that the EAC is a driving force of the seasonal ocean dynamics for the northern NSW coast.

This data package, completed as part of Geoscience Australia’s National Groundwater Systems (NGS) Project, presents results of the second iteration of the 3D Great Artesian Basin (GAB) and Lake Eyre Basin (LEB) (Figure 1) geological and hydrogeological models (Vizy & Rollet, 2023) populated with volume of shale (Vshale) values calculated on 2,310 wells in the Surat, Eromanga, Carpentaria and Lake Eyre basins (Norton & Rollet, 2023). This provides a refined architecture of aquifer and aquitard geometry that can be used as a proxy for internal, lateral, and vertical, variability of rock properties within each of the 18 GAB-LEB hydrogeological units (Figure 2). These data compilations and information are brought to a common national standard to help improve hydrogeological conceptualisation of groundwater systems across multiple jurisdictions. This information will assist water managers to support responsible groundwater management and secure groundwater into the future. This 3D Vshale model of the GAB provides a common framework for further data integration with other disciplines, industry, academics and the public and helps assess the impact of water use and climate change. It aids in mapping current groundwater knowledge at a GAB-wide scale and identifying critical groundwater areas for long-term monitoring. The NGS project is part of the Exploring for the Future (EFTF) program—an eight-year, $225 million Australian Government funded geoscience data and precompetitive information acquisition program. The program seeks to inform decision-making by government, community, and industry on the sustainable development of Australia's mineral, energy, and groundwater resources, including those to support the effective long-term management of GAB water resources. This work builds on the first iteration completed as part of the Great Artesian Basin Groundwater project (Vizy & Rollet, 2022; Rollet et al., 2022), and infills previous data and knowledge gaps in the GAB and LEB with additional borehole, airborne electromagnetic and seismic interpretation. The Vshale values calculated on additional wells in the southern Surat and southern Eromanga basins and in the whole of Carpentaria and Lake Eyre basins provide higher resolution facies variability estimates from the distribution of generalised sand-shale ratio across the 18 GAB-LEB hydrogeological units. The data reveals a complex mixture of sedimentary environments in the GAB, and highlights sand body development and hydraulic characteristics within aquifers and aquitards. Understanding the regional extents of these sand-rich areas provides insights into potential preferential flow paths, within and between the GAB and LEB, and aquifer compartmentalisation. However, there are limitations that require further study, including data gaps and the need to integrate petrophysics and hydrogeological data. Incorporating major faults and other structures would also enhance our understanding of fluid flow pathways. The revised Vshale model, incorporating additional boreholes to a total of 2,310 boreholes, contributes to our understanding of groundwater flow and connectivity in the region, from the recharge beds to discharge at springs, and Groundwater Dependant Ecosystems (GDEs). It also facilitates interbasinal connectivity analysis. This 3D Vshale model offers a consistent framework for integrating data from various sources, allowing for the assessment of water use impacts and climate change at different scales. It can be used to map groundwater knowledge across the GAB and identify areas that require long-term monitoring. Additionally, the distribution of boreholes with gamma ray logs used for the Vshale work in each GAB and LEB units (Norton & Rollet, 2022; 2023) is used to highlight areas where additional data acquisition or interpretation is needed in data-poor areas within the GAB and LEB units. The second iteration of surfaces with additional Vshale calculation data points provides more confidence in the distribution of sand bodies at the whole GAB scale. The current model highlights that the main Precipice, Hutton, Adori-Springbok and Cadna-owie‒Hooray aquifers are relatively well connected within their respective extents, particularly the Precipice and Hutton Sandstone aquifers and equivalents. The Bungil Formation, the Mooga Sandstone and the Gubberamunda Sandstone are partial and regional aquifers, which are restricted to the Surat Basin. These are time equivalents to the Cadna-owie–Hooray major aquifer system that extends across the Eromanga Basin, as well as the Gilbert River Formation and Eulo Queen Group which are important aquifers onshore in the Carpentaria Basin. The current iteration of the Vshale model confirms that the Cadna-owie–Hooray and time equivalent units form a major aquifer system that spreads across the whole GAB. It consists of sand bodies within multiple channel belts that have varying degrees of connectivity' i.e. being a channelised system some of the sands will be encased within overbank deposits and isolated, while others will be stacked, cross-cutting systems that provide vertical connectivity. The channelised systemtransitions vertically and laterally into a shallow marine environment (Rollet et al., 2022). Sand-rich areas are also mapped within the main Poolowanna, Brikhead-Walloon and Westbourne interbasinal aquitards, as well as the regional Rolling Downs aquitard that may provide some potential pathways for upward leakage of groundwater to the shallow Winton-Mackunda aquifer and overlying Lake Eyre Basin. Further integration with hydrochemical data may help groundtruth some of these observations. This metadata document is associated with a data package including: • Seventeen surfaces with Vshale property (Table 1), • Seventeen surfaces with less than 40% Vshale property (Table 2), • Twenty isochore with average Vshale property (Table 3), • Twenty isochore with less than 40% Vshale property (Table 4), • Sixteen Average Vshale intersections of less than 40% Vshale property delineating potential connectivity between isochore (Table 5), • Sixteen Average Vshale intersections of less than 40% Vshale property delineating potential connectivity with isochore above and below (Table 6), • Seventeen upscaled Vshale log intersection locations (Table 7), • Six regional sections showing geology and Vshale property (Table 8), • Three datasets with location of boreholes, sections, and area of interest (Table 9).

Geoscience Australia’s Exploring for the Future (EFTF) program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government. Further detail is available at http://www.ga.gov.au/eftf. The National Groundwater Systems (NGS) project, is part of the Australian Government’s Exploring for the Future (EFTF) program, led by Geoscience Australia (https://www.eftf.ga.gov.au/national-groundwater-systems), to improve understanding of Australia’s groundwater resources to better support responsible groundwater management and secure groundwater resources into the future. The project is developing new national data coverages to constrain groundwater systems, develop a new map of Australian groundwater systems and improve data standards and workflows of groundwater assessment to populate a consistent data discovery tool and web-based mapping portal to visualise, analyse and download hydrogeological information. While our hydrogeological conceptual understanding of Australian groundwater systems continues to grow in each State and Territory jurisdiction, in addition to legacy data and knowledge from the 1970s, new information provided by recent studies in various parts of Australia highlights the level of geological complexity and spatial variability in stratigraphic and hydrostratigraphic units across the continent. We recognise the need to standardise individual datasets, such as the location and elevation of boreholes recorded in different datasets from various sources, as well as the depth and nomenclature variations of stratigraphic picks interpreted across jurisdictions to map such geological complexity in a consistent, continent-wide stratigraphic framework that can support effective long-term management of water resources and integrated resource assessments. This stratigraphic units data compilation at a continental scale forms a single point of truth for basic borehole data including 47 data sources with 1 802 798 formation picks filtered to 1 001 851 unique preferred records from 171 367 boreholes. This data compilation provides a framework to interpret various borehole datasets consistently, and can then be used in a 3D domain as an input to improve the 3D aquifer geometry and the lateral variation and connectivity in hydrostratigraphic units across Australia. The reliability of each data source is weighted to use preferentially the most confident interpretation. Stratigraphic units are standardised to the Australian Stratigraphic Units Database (ASUD) nomenclature (https://asud.ga.gov.au/search-stratigraphic-units) and assigned the corresponding ASUD code to update the information more efficiently when needed. This dataset will need to be updated as information grows and is being revised over time. This dataset provides: 1. ABSUC_v1 Australian stratigraphic unit compilation dataset (ABSUC) 2. ABSUC_v1_TOP A subset of preferred top picks from the ABSUC_v1 dataset 3. ABSUC_v1_BASE A subset of preferred base picks from the ABSUC_v1 dataset 4. ABSUC_BOREHOLE_v1 ABSUC Borehole collar dataset 5. ASUD_2023 A subset of the Australia Stratigraphic Units Database (ASUD) This consistent stratigraphic units compilation has been used to refine the Great Artesian Basin geological and hydrogeological surfaces in this region and will support the mapping of other regional groundwater systems and other resources across the continent. It can also be used to map regional geology consistently for integrated resource assessments.