Two bathymetric surveys of Darwin Harbour were undertaken during the period 17 October to 07 November 2010 and 24 June to 20 August 2011 by iXSurvey Australia Pty Ltd for Darwin Port Corporation and Department of Lands Planning, and the Department of Natural Resources, Environment, The Arts and Sport (NRETAS) in collaboration with Geoscience Australia (GA), the Darwin Port Corporation (DPC) and the Australian Institute of Marine Science (AIMS) using iXSurvey's and GA's Kongsberg EM3002D multibeam sonar systems and DPC's vessel 'Matthew Flinders'.

Geoscience Australia conducted a marine survey (GA-0345 andGA-0346 /TAN1411) in Commonwealth waters of the north-eastern Browse Basin (Caswell Sub-basin) between 9 October and 9 November 2014. The purpose of the survey was to collect pre-competitive marine data to support a CO2 storage assessment in the Browse Basin, with particular emphasis on the integrity of seals overlying select CO2 storage plays. Data acquisition was undertaken as part of the National CO2 Infrastructure Plan (NCIP), administered by the Department of Industry and Science. The survey was conducted in 3 Legs aboard the New Geoscience Australia (GA) conducted a marine survey (GA0345/GA0346/TAN1411) of the north-eastern Browse Basin (Caswell Sub-basin) between 9 October and 9 November 2014 to acquire seabed and shallow geological information to support an assessment of the CO2 storage potential of the basin. The survey, undertaken as part of the Department of Industry and Science's National CO2 Infrastructure Plan (NCIP), aimed to identify and characterise indicators of natural hydrocarbon or fluid seepage that may indicate compromised seal integrity in the region. The survey was conducted in three legs aboard the New Zealand research vessel RV Tangaroa, and included scientists and technical staff from GA, the NZ National Institute of Water and Atmospheric Research Ltd. (NIWA) and Fugro Survey Pty Ltd. Shipboard data (survey ID GA0345) collected included multibeam sonar bathymetry and backscatter over 12 areas (A1, A2, A3, A4, A6b, A7, A8, B1, C1, C2b, F1, M1) totalling 455 km2 in water depths ranging from 90 - 430 m, and 611 km of sub-bottom profile lines. Seabed samples were collected from 48 stations and included 99 Smith-McIntyre grabs and 41 piston cores. An Autonomous Underwater Vehicle (AUV) (survey ID GA0346) collected higher-resolution multibeam sonar bathymetry and backscatter data, totalling 7.7 km2, along with 71 line km of side scan sonar, underwater camera and sub-bottom profile data. Twenty two Remotely Operated Vehicle (ROV) missions collected 31 hours of underwater video, 657 still images, eight grabs and one core. This catalogue entry refers to bathymetry data acquired during survey GA0345/GA0346/TAN1411.

Geoscience Australia carried out a marine survey on Carnarvon shelf (WA) in 2008 (SOL4769) to map seabed bathymetry and characterise benthic environments through colocated sampling of surface sediments and infauna, observation of benthic habitats using underwater towed video and stills photography, and measurement of ocean tides and wavegenerated currents. Data and samples were acquired using the Australian Institute of Marine Science (AIMS) Research Vessel Solander. Bathymetric mapping, sampling and video transects were completed in three survey areas that extended seaward from Ningaloo Reef to the shelf edge, including: Mandu Creek (80 sq km); Point Cloates (281 sq km), and; Gnaraloo (321 sq km). Additional bathymetric mapping (but no sampling or video) was completed between Mandu creek and Point Cloates, covering 277 sq km and north of Mandu Creek, covering 79 sq km. Two oceanographic moorings were deployed in the Point Cloates survey area. The survey also mapped and sampled an area to the northeast of the Muiron Islands covering 52 sq km. The dataset contains 6 bathymetry grids of the Carnarvon Shelf study area produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software. Please see the metadata for detailed information.<p><p>This dataset is not to be used for navigational purposes.

The Petrel Sub-basin Marine Environmental Survey GA-0335 was acquired by the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between Geoscience Australia and the Australian Institute of Marine Science (AIMS) . The purpose was to acquire geophysical and biophysical data on shallow (less than 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas.<p><p>This dataset is not to be used for navigational purposes.

The remote Eastern frontiers project aimed to provide a geological and petroleum prospectivity assessement of the Faust Capel Basins. Funded through Australian Governement Initiatives (Energy Security Program). The Faust Capel Basins survey GA-2436/ TAN0713 was acquired by Geoscience Australia onboard the RV Tangaroa (operated by NIWA) from the 6th of October to the 22nd of November 2007. The geographic range stretched from Wellington to the Faust Capel Basins to Lord Howe Island and back to Wellington. Approximately 8,945 sailing km of multibeam bathymetry was acquired. The high resolution bathymetry data imaged seafloor features in unprecedented detail, revealing the effects of recent magmatic activity and fluid migration on the seafloor. It also produced a new image of a flat topped unexplored seamount. A member of the Lord Howe Rise seamount chain.<p><p>This dataset is not to be used for navigational purposes.

The Petrel Sub-basin CO2 storage 2D seismic survey GA-0336, was acquired by the MV Duke in the Bonaparte Bay, NW Australia for Geoscience Australia between the the 3rd of May to the 24th of June 2012. This survey was part of the Australian government's National Low emission Coal Initiative (NLECI).The purpose was to acquire geophysical data on shallow water (less than 120m water depth) in the Petrel sub-basin to support investigation for CO2 storage potential in the area. Multibeam bathymetry data was acquired by the vessel at the same time as the seismic data. This bathymetry dataset consist of the high resolution bathymetry grids (2m) of all the swath data acquired by the MV Duke.<p><p>This dataset is not to be used for navigational purposes.

The NSW Continental Slopes survey GA-2413, SS10/2006 was acquired by Geoscience australia onboard the RV Southern Surveyor from the 12th of October to the 25th of October 2006. The geographical range stretched from Jervis bay in the South to Port Stephens in the North. The aim was to assess the physical nature of the NSW continental slope, improve our understanding of the surface and subsurface structure of the continental slope and to investigate the history of sediment movement along the continental slope.<p><p>This dataset is not to be used for navigational purposes.

The EM300 Sea Trials survey GA-2354, was acquired by Geoscience Australia after the installation of the new multibeam bathymetry acquisition system EM300 onboard the RV Southern Survey during the 16 to 18th of December 2003. The survey location was offshore Fremantle around the Perth Canyon. The aim of the survey was to test the bathymetry system installed on the vessel. The bathymetry grids consists of 10 and 40m resolution grids projected in Easting and Northing WGS84 UTM 50S.<p><p>This dataset is not to be used for navigational purposes.

The Casey Station Bathymetry Survey was conducted last summer from December 2014 to February 2015. This collaborative survey was undertaken by Geoscience Australia, the Royal Australian Navy and the Australian Antarctic Division, using the AAD's workboat the RV Howard Burton. The survey goal was to acquire high resolution bathymetry data to improve our understanding of the seafloor using multibeam sonar. The bathymetry data collection will be supplemented by physical sampling of the seafloor sediments and video recordings of the biological communities living in the seafloor. The survey will cover areas that haven't been charted during the 2013 Casey Survey and are frequently used by the RSV Aurora Australis. Improving our understanding of the seabed environment in these shallow coastal waters will ultimately lead to a better environmental management of the Australian Antarctic Territory. The data will also help the RAN to develop more accurate navigation charts therefore reducing the risk to maritime operation in the region.

A bathymetric survey of Darwin Harbour was undertaken during the period 24 June to 20 August 2011 by iXSurvey Australia Pty Ltd for the Department of Natural Resources, Environment, The Arts and Sport (NRETAS) in collaboration with Geoscience Australia (GA), the Darwin Port Corporation (DPC) and the Australian Institute of Marine Science (AIMS) using GA's Kongsberg EM3002D multibeam sonar system and DPC's vessel 'Matthew Flinders'.