<div>The Otway, Gippsland Basins and Bass Strait 3D seismic derived bathymetry compilation (20220007C) was produced by the University of Western Australia, Norwegian Geotechnical Institute and UniLasalle in collaboration with Geoscience Australia through the AusSeabed initiative. The compilation integrates 87 bathymetry grids derived from available and workable 3D seismic datasets into a 30 m resolution 32-bit GeoTIFF, including both reflection and navigation derived data. A detailed workflow is described in: Lebrec, U., Paumard, V., O'Leary, M. J., and Lang, S. C., 2021, Towards a regional high-resolution bathymetry of the North West Shelf of Australia based on Sentinel-2 satellite images, 3D seismic surveys, and historical datasets: Earth System Science Data, v. 13, no. 11, p. 5191-5212 https://doi.org/10.5194/essd-13-5191-2021, 2021.</div><div><br></div><div>This dataset is not to be used for navigational purposes.</div><div><br></div>

<div>The Southwest Margins seismic-derived bathymetry was produced in 2023 as part of a collaboration between The University of Western Australia and the AusSeabed Community. The compilation integrates 19 bathymetry grids derived from available and workable 3D seismic datasets into a 30 m resolution 32-bit GeoTIFF, including both reflection and navigation derived data. A detailed workflow is described in: Lebrec, U., Paumard, V., O'Leary, M. J., and Lang, S. C., 2021, Towards a regional high-resolution bathymetry of the North West Shelf of Australia based on Sentinel-2 satellite images, 3D seismic surveys, and historical datasets: Earth System Science Data, v. 13, no. 11, p. 5191-5212 https://doi.org/10.5194/essd-13-5191-2021, 2021.</div><div><br></div><div>This dataset is not to be used for navigational purposes.</div><div><br></div>

The Australian Bathymetry and Topography (AusBathyTopo) Torres Strait dataset contains depth and elevation data compiled from all available data within the Torres Strait into a 30 m-resolution Digital Elevation Model (DEM). The Torres Strait lies at the northern end of the Great Barrier Reef (GBR), the largest coral reef ecosystem on Earth, and straddles the Arafura Sea to the west and the Coral Sea to the east. The Torres Strait area is bounded by Australia, Indonesia and Papua New Guinea. Bathymetry mapping of this extensive reef and shoal system is vital for the protection of the Torres Strait allowing for the safe navigation of shipping and improved environmental management. Over past ten years, deep-water multibeam surveys have revealed the highly complex continental slope canyons in deeper Coral Sea waters. Shallow-water multibeam surveys conducted by the US-funded Source-to-Sink program revealed the extensive Fly River delta deposits. Airborne LiDAR bathymetry acquired by the Australian Hydrographic Office cover most of the Torres Strait and GBR reefs, with coverage gaps supplemented by satellite derived bathymetry. The Geoscience Australia-developed National Intertidal DIgital Elevation Model (NIDEM) improves the source data gap along Australia’s vast intertidal zone. We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353 ) in undertaking this research.” The datasets used were collected by the Marine National Facility on 13 voyages (see Lineage for identification). All source bathymetry data were extensively edited as point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum. The 30 m-resolution grid is a fundamental dataset to underpin marine habitat mapping, and can be used to accurately simulate water mixing within a whole-of-GBR scale hydrodynamic model. This dataset is not to be used for navigational purposes.

<div>The Rowley Shelf 3D seismic derived bathymetry compilation (20220005C) was produced in 2023 as part of the a collaboration between The University of Western Australia, Norwegian Geotechnical Institute and UniLasalle and Geoscience Australia through the AusSeabed Community. The compilation integrates 223 bathymetry grids derived from available and workable 3D seismic reflection datasets into a 30 m resolution 32-bit GeoTIFF. A detailed workflow is described in: Lebrec, U., Paumard, V., O'Leary, M. J., and Lang, S. C., 2021, Towards a regional high-resolution bathymetry of the North West Shelf of Australia based on Sentinel-2 satellite images, 3D seismic surveys, and historical datasets: Earth System Science Data, v. 13, no. 11, p. 5191-5212 https://doi.org/10.5194/essd-13-5191-2021, 2021.</div><div><br></div><div><br></div><div>This dataset is not to be used for navigational purposes.</div>

The AusBathyTopo 250m (Australia) 2023 Grid is a high-resolution depth model for Australia that replaces the Australian Bathymetry and Topography Grid, June 2009. This publication is the result of a collaborative partnership between Geoscience Australia, the Australian Hydrographic Office, James Cook University, and the University of Sydney. It has been compiled using 1582 unique data sources from multibeam echosounders, single-beam echosounders, LiDAR, 3D seismic first returns, Electronic Navigation Charts and satellite derived bathymetry alongside higher-resolution regional compilations. In particular, the map incorporates new innovations such as the use of earth observation data (satellite based) produced by Digital Earth Australia to improve shallow coastal depth modelling to present a seamless transition between land and sea. All source bathymetry data were extensively edited as 3D point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum. This new continental-scale grid represents decades of data collection, analysis, investment and collaboration from Australia’s seabed mapping community and is a significant improvement on the 2009 compilation. The data extends across a vast area from 92°E to 172° E and 8°S to 60° S. This includes areas adjacent to the Australian continent and Tasmania, and surrounding Macquarie Island and the Australian Territories of Norfolk Island, Christmas Island, and Cocos (Keeling) Islands. Australia's marine jurisdiction offshore from the territory of Heard and McDonald Islands and the Australian Antarctic Territory are not included. We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353 ) in undertaking this research. The datasets used were collected by the Marine National Facility on 43 voyages (see Lineage for identification). This dataset is not to be used for navigational purposes.

This resource contains a bathymetry compilation prepared by the University of Western Australia for the North West Shelf of Australia, between the Cape Range and the Dampier Peninsula. The compilation includes, by decreasing resolution: - Publicly available MBES datasets, made available by Geoscience Australia by December 2019. - Satellite derived bathymetry produced using 1000+ images acquired between January 2017 and December 2019. - Seismic derived bathymetry extracted from 100+ surveys acquired between 1981 and 2015. - SRTM topography, reprocessed by Galant et al, 2011: https://pid.geoscience.gov.au/dataset/ga/72759 - 2009 Australian Bathymetry and Topography grid: https://pid.geoscience.gov.au/dataset/ga/67703 The Seismic and Satellite derived bathymetry grids are also available as individual layers. The vertical and spatial accuracy of the datasets have been thoroughly assessed using high-resolution datasets including publicly available MBES and LADS surveys. The assessment indicates that the seismic derived bathymetry has a depth accuracy better than 1 m + 2% of the absolute water depths while the satellites derived bathymetry has a depth accuracy better than 1 m + 5% of the absolute water depths. A detailed methodology is provided in: Lebrec et al, 2021. Towards a regional high-resolution bathymetry of the North West Shelf of Australia based on Sentinel-2 satellite images, 3D seismic surveys and historical datasets. (in prep.) This dataset is published with the permission of the CEO, Geoscience Australia. AUTHOR’S NOTICE: This dataset should not be used, under any circumstances, for navigation. When used, the dataset should be referenced as follow: Lebrec, U., Paumard, V., O'Leary, M. J., and Lang, S. C.: Towards a regional high-resolution bathymetry of the North West Shelf of Australia based on Sentinel-2 satellite images, 3D seismic surveys and historical datasets, Earth Syst. Sci. Data Discuss. [preprint], https://doi.org/10.5194/essd-2021-128, in review, 2021.

The Bonaparte and Browse Basins 3D seismic derived bathymetry compilation (20220002C) was produced by the University of Western Australia, Norwegian Geotechnical Institute and UniLasalle in collaboration with Geoscience Australia through the AusSeabed initiative. The compilation integrates 127 bathymetry grids derived from available and workable 3D seismic datasets into a 30 m resolution 32-bit geotiff. A detailed workflow is described in: Lebrec, U., Paumard, V., O'Leary, M. J., and Lang, S. C., 2021, Towards a regional high-resolution bathymetry of the North West Shelf of Australia based on Sentinel-2 satellite images, 3D seismic surveys, and historical datasets: Earth System Science Data, v. 13, no. 11, p. 5191-5212 https://doi.org/10.5194/essd-13-5191-2021, 2021. This dataset is not to be used for navigational purposes.