These datasets cover approximately 132 sq km along the eastern boundary of the Yarrabah Shire Council and were captured as part of the 2010 Cairns LiDAR project. This project, undertaken by Terranean Mapping Technologies on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape

These datasets cover approximately 743 sq km over Atherton, Biboohra-Koah, Chillagoe, Dimbulah, Herberton, Irvinebank, Kairi-Tinaroo, Malanda, Mareeba, Millaa-Millaa, Millstream, Mt Carbine, Mt Garnet, Mt Molloy, Mutchilba, Rangeview-Tolga, Ravenshoe, Speewah, Walkamin, Watsonville and Yungaburra in the Tablelands Regional Council and were captured as part of the 2011 Tablelands LiDAR project. This project, undertaken by Terranean Mapping Technologies on behalf of the Tablelands Regional Council captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape

These datasets cover approximately 247 sq km in the southern section of the Townsville City Council and are part of the 2011 Lower Burdekin LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape

This job was part of the Coastal capture program. It captures from the coast to the 10m contour interval.

This job was planned due to a requirement for high accuracy aerial photography to be used as part of a cadastral adjustment program. The high quality laser derived surface means that there would be minimal distortion on the part of the imagery and so it would suit the purpose well. The job was extended beyond the immediate town extents as the council was also interested in floodplain mapping and cadastral adjustment in the surrounds.

Victoria Coast 2007-2008

This point data set was created to identify locations on (or near) the Australian coastline which were considered to represent significant changes in key environmental attributes of the coast as they pertain to sediment movement in the coastal zone. This data was created during and subsequent to the technical workshop hosted by Geoscience Australia in Canberra from 16-18 October 2012. This workshop brought together the team of Australian coastal science experts listed below. - Prof. Bruce Thom - University of Sydney and the Wentworth Group - Prof. Andy Short - University of Sydney - Prof. Colin Woodroffe - University of Wollongong - Dr. Ian Eliot - University of Western Australia - Mr. Chris Sharples - University of Tasmania - Dr. Brendan Brooke - Geoscience Australia - Dr. Scott Nichol - Geoscience Australia The technical workshop had the goal of creating regional (primary) and sub-regional (secondary) scale coastal sediment compartments spatial zones (represented by polygons) within (or between) which sediment movement could be considered on scales and timeframes relevant to coastal management. The first step in this process involved the expert panel identifying and defining boundary points along the Australian coastline, after which the expert panel assigned relevant environmental attributes to each point. Following the development of the boundary points data set, breaklines representing the coast-perpendicular compartment boundaries were generated by extending a line from the defined offshore bathymetric contour to the defined onshore elevation contour. In every case a compartment breakline extends seaward and landward of its boundary point.

These datasets cover approximately 2250 sq km in the central sector of the Cassowary Coast Regional Council and over all of Dunk and Hinchinbrook Islands and are part of the 2009 Tropical Coast LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 2 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - ASCII xyz dataset of LiDAR ground returns - ASCII xyz dataset of LiDAR ground returns - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI binary grid - 0.25 metre contours in ESRI Shape

Melbourne 2007-2008

These datasets cover approximately 980 sq km in the western sector of the Burdekin Regional Council and are part of the 2011 Lower Burdekin LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape