Grids representing chemical parameter concentrations and isotopic variations in groundwater in the Great Artesian Basin for the following aquifers: Adori Sandstone; Cadna-owie - Hooray and equivalents; Hutton Sandstone and Winton-Mackunda Formation. (Note: Stable isotope carbon variations, Carbon-14 variation and Chlorine ratios produced for the Cadna-owie-Hooray and equivalents only) Hydrochemical parameters and isotopic variations mapped are: - Total dissolved solids (TDS) (mg/L) (adori_tds.txt, cad-hoor_tds.txt, hutton_tds.txt, wint-mack_tds.txt) - Total alkalinity (mg/L CaCO3) (adori_alk, cad-hoor_alk, hutton_alk, wint-mack_alk) - Sulphate (mg/L) ( adori_so4, cad-hoor_so4, hutton_so4, wint-mack_so4) - Fluoride (mg/L) ( adori_flu, cad-hoor_flu, hutton_flu, wint-mack_flu) - Sodium adsorption ratio (adori_sar, cad-hoor_sar, hutton_sar, wint-mack_sar) - Stable carbon isotope variations (d13C % PDB) ( tp-rs_13c_ch) - Carbon-14 variation (14C pMC) ( tp-rs_14c_ch) - Chlorine-36 to Chloride ratio ( t-rs_36clr_ch) Grid cell size (X, Y) = 0.015 DD, 0.015 DD. These GIS data sets were produced for the Great Artesian Basin Water Resource Assessment and used in Figures 8.2, 8.4, 8.5, 8.6, 8.8, 8.10, 8.12 and 8.13 of Ransley TR and Smerdon BD (eds) (2012) Hydrostratigraphy, hydrogeology and system conceptualisation of the Great Artesian Basin. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. This dataset and associated metadata can be obtained from www.ga.gov.au, using catalogue number 76942.

This report presents key results from the Ti Tree Basin project completed as part of Exploring for the Future (EFTF)—an eight year, $225 million Australian Government funded geoscience data and information acquisition program focused on better understanding the potential mineral, energy and groundwater resources across Australia. Hydrogeological data acquisition and interpretation in the Ti Tree Basin, Northern Territory, was undertaken by Geoscience Australia as part of the EFTF Program. Located ~150 km north of Alice Springs, the Cenozoic basin hosts regionally significant groundwater resources, relied upon by communities, irrigators and pastoralists. Although the basin has been extensively studied over several decades, critical information gaps still remain, particularly for the deep groundwater system (>80 m depth). Work combining new geophysical and hydrochemical data with pre-existing datasets has revealed a more complex basin hydrogeology. Mapping based on airborne electromagnetics (AEM) has identified complex structural controls on the distribution of the deep basin sequence, with consequences for aquifer compartmentalisation, regional groundwater flow and aquifer connectivity. The mapping also shows where the basin sediments are much thicker than previously drilled. The hydrochemical assessment highlighted the complexity in groundwater recharge mechanisms, showing that the rainfall threshold for effective recharge and the role of evaporation are not consistent across the floodout zones in the basin. The EFTF products provide guidance for future hydrogeological investigations. In particular, there is evidence from historic drilling for potentially useful groundwater resources in the underexplored deep basin sequence. The EFTF program has expanded the knowledge base and datasets for the Ti Tree Basin. Collectively, these are valuable assets not just for basin groundwater management but also for the broader understanding of groundwater resources and processes in central Australia.

This web service provides access to geological, hydrogeological and hydrochemical digital datasets that have been published by Geoscience Australia for the Great Artesian Basin (GAB).

This service provides access to hydrochemistry data (groundwater and surface water analyses) obtained from water samples collected from Australian water bores or field sites.

This report presents key results of the Ti Tree Basin study completed as part of Exploring for the Future (EFTF)—an eight year, $225 million Australian Government funded geoscience data and information acquisition program focused on better understanding the potential mineral, energy and groundwater resources across Australia. As part of EFTF, Geoscience Australia undertook an assessment of available and new hydrochemical data collected in the Ti Tree Basin, Northern Territory. The basin is one of the four water control districts within the Southern Stuart Corridor Project area. Communities, irrigation farms and pastoral stations in the basin rely on groundwater, and extensive groundwater sampling and hydrochemical investigations have been undertaken over the past 50 years. An opportunity was recognised to collate and interpret the existing data, supplemented by new EFTF data, not only to add value to the understanding of groundwater processes in the basin itself but also to provide a useful knowledge base for other groundwater resources in the region that are poorly understood. This study largely relied on the available groundwater analysis data from the Northern Territory Department of Environment and Natural Resources database, supplemented by publicly available analyses from other sampling campaigns, including the EFTF, totaling 1913 groundwater samples across the district. The key findings of the study are: • The hydrochemistry data, particularly on salinity (total dissolved solids (TDS)), ion ratios (e.g. HCO3/Cl, Cl/(Cl+HCO3), Cl/(Cl+HCO3+SO4), Na/Cl) and radiocarbon (14C) could be used to map the three major recharge areas for the basin—the floodout of the Woodforde River to the west, the floodout of Allungra Creek in the basin centre, and the eastern basin margin. This is consistent with the current accepted interpretation that recharge is dominated by episodic run-on and infiltration in drainage floodout areas, driven by intense rainfall events that generate runoff in upland basement headwaters and ephemeral flows in basin creeks. There are no hydrochemical indicators of recharge in the vicinity of the channelised reaches of the basin creeks (i.e. both Woodforde River and Allungra Creek), located upstream of the floodouts. • From a groundwater resource perspective, the Allungra Creek floodout has broadly the best combination of low-salinity groundwater (median TDS = 740 mg/L) and bore yield statistics (median = 10 L/s). The Woodforde River floodout also has areas with high-yielding bores (>10 L/s) of fresh groundwater (<1000 mg/L), with the borehole distribution suggesting that the fresh groundwater resource is significantly more extensive to the west of the river than that previously mapped. The eastern basin margin generally has low-salinity groundwater (median TDS = 775 mg/L) but lower bore yields (median = 4.4 L/s). • There are differences in the recharge characteristics of the three floodout areas, due to differences in drainage catchments and floodout hydrogeology. The Woodforde River floodout has the most depleted stable isotopes, interpreted to be due to a higher rainfall/runoff threshold for recharge (>150 mm/month). It also has the largest isotopic range and the best δ18O-δ2H linear regression, suggesting the most influence of evaporation, such as a longer period of surface water ponding. In comparison, the stable isotope signature for Allungra Creek groundwaters suggests a lower rainfall/runoff threshold for recharge (>100 mm/month) and low evaporative influence, hence relatively rapid infiltration. This is also inferred to be the case for the low-salinity eastern basin margin groundwaters. For both Woodforde River and Allungra Creek, modern recharge is indicated by groundwaters with high radiocarbon activity (14C percent modern carbon (pMC) >70). For the eastern basin margin, radiocarbon activity is low to moderate (14C pMC 20–50). This is interpreted to reflect a longer travel time in the unsaturated zone. • In the floodout areas, the dominant hydrogeochemical process relating to the fresh groundwater is water–rock interactions. Groundwater tends to be the least evolved Ca(Mg)-HCO3 or transitional Na(K)-HCO3 water type, according to Chadha plots. Zones of prevalence of carbonate-gypsum dissolution or Na-silicate weathering could be mapped using indicators such as cation chloride ratio. Ion exchange is also a likely process in these fresh groundwaters, as inferred from chloro-alkaline indices. • Groundwater salinity is higher away from the floodout areas. This increased salinity is due to evapotranspirative concentration in addition to water–rock interactions, as inferred from ion ratios, including Cl/Br. Stable isotopes indicate that transpiration of groundwater by vegetation accessing the watertable, rather than direct evaporation, is the dominant process in these areas. This process is particularly evident in the Wilora Palaeochannel, the northern extension of the basin, which generally has the highest groundwater salinities (median TDS = 1575 mg/L), the lowest bore yields (median = 1.9 L/s) and the greatest prevalence of shallow watertables (<15 m). With higher salinities, groundwaters tend to be the evolved Ca(Mg)-Cl(SO4) and Na(K)-Cl(SO4) water types and potentially influenced by reverse ion exchange processes. • Mountain-front recharge has previously been proposed as an additional recharge mechanism, notably near the southern basin margin. Although sampling is limited in this area, hydrochemical indicators such as low HCO3/Cl, high Na/Cl and evolved Na(K)-Cl(SO4) water type suggests that active recharge is not significant. The watertable is deep along the southern basin margin (>50 m), so groundwater chemistry can be strongly influenced by processes during downward infiltration through a thick unsaturated zone. • Limited sampling of deeper bores (>80 m), potentially in the Hale Formation, generally have the characteristics of being more saline and lower yielding compared to bores in the shallow groundwater resource (particularly from 40 m to 80 m). However, there are deep bores with good yields of fresh groundwater; of 57 bores in the basin with interval depths exceeding 80 m, eight (14%) have the combination of yield >5 L/s and salinity <1000 mg/L. The deeper groundwaters are typically Ca(Mg)-Cl(SO4) and Na(K)-Cl(SO4) water types, with the latter, more evolved, water type dominating at depths >120 m. There are very few stable isotope analyses for the deeper groundwaters, but these are within the isotopic range for the shallow groundwaters in the same area, suggesting similarity in recharge processes and a degree of aquifer connectivity. Likewise, there are very few radiocarbon analyses for deeper groundwaters (depth >60 m), but these consistently show low 14C activity (pMC <40). The higher salinities, evolved water types and low 14C activity reflect longer residence times in the deeper groundwater system. The study highlighted that floodout recharge, involving episodic flow of basin creeks from headwater catchments, is the most dominant mechanism, rather than direct infiltration from large rainfall events. The study also identified that recharge characteristics, particularly the rainfall threshold for effective recharge and the role of evaporation, are not consistent across the floodout zones in the basin. This likely reflects differences in upland catchment size and geology, as well as floodout landform and hydrogeology. The study also highlighted the importance of groundwater-dependent vegetation in the basin, with dominance of transpiration of groundwater rather than direct evaporation. The groundwater hydrochemistry datasets and interpretation maps can support informed water management decisions within the basin. For example, improved understanding of the spatial and temporal distribution of recharge is not only needed for defining groundwater extraction limits but also used in strategies such as managed aquifer recharge. The EFTF work adds to the knowledge base and datasets that have developed over decades for the Ti Tree Basin, which are also valuable assets for broader understanding of groundwater resources in central Australia.

This service provides access to hydrochemistry data (groundwater and surface water analyses) obtained from water samples collected from Australian water bores or field sites.

We present a multifaceted hydrogeological investigation of the McBride and Nulla basalt provinces in the Upper Burdekin region, north Queensland. The project aims to better understand their key groundwater system processes to inform future development and water management decisions. This work, carried out as part of the Exploring for the Future Upper Burdekin Groundwater Project, has shown that basalt aquifers in each province are typically unconfined where monitored. Groundwater recharge is widespread but highly variable, largely occurring within the boundaries of the basalt provinces. Groundwater salinity based on electrical conductivity is <1000 μS/cm in the McBride Basalt Province (MBP) and up to 2000 μS/cm in the Nulla Basalt Province (NBP). Groundwater levels have been declining since 2011 (following major flooding in Queensland), showing that the study period covers a small fraction of a longer-functioning dynamic groundwater system. The basalt provinces contain distinct lava flows, and the degree of hydraulic connectivity between them is unclear. Despite similarities in their rock properties, the geometry of lava emplacement leads to different groundwater flow regimes within the two basalt provinces. Radial flow away from the central high elevations towards the edges is characteristic of the MBP, while regional flow from west to east dominates the NBP. Basalt aquifers in both provinces support a range of groundwater-dependent ecosystems, such as springs, some of which sustain flow in tributaries of the Burdekin River. Where streams intersect basalt aquifers, this also results in direct groundwater discharge. Springs and perennial tributaries, particularly emanating from the MBP, provide important inflows to the Burdekin River, especially in the dry season. This work has highlighted that management of MBP and NBP groundwater sources is crucial for maintaining a range of environmental assets in the region and for ensuring access for existing and future users. <b>Citation:</b> Ransley, T.R., Dixon-Jain, P., Cook, S.B., Lai, E.C.S., Kilgour, P., Wallace, L., Dunn, B., Hansen, J.W.L. and Herbert, G., 2020. Hydrogeology of the McBride and Nulla basalt provinces in the Upper Burdekin region, north Queensland. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

This report presents key results from hydrogeological investigations in the Tennant Creek region, completed as part of Exploring for the Future (EFTF)—an eight year, $225 million Australian Government funded geoscience data and information acquisition program focused on better understanding the potential mineral, energy and groundwater resources across Australia. The EFTF Southern Stuart Corridor (SSC) Project area is located in the Northern Territory and extends in a north–south corridor from Tennant Creek to Alice Springs, encompassing four water control districts and a number of remote communities. Water allocation planning and agricultural expansion in the SSC is limited by a paucity of data and information regarding the volume and extent of groundwater resources and groundwater systems more generally. Geoscience Australia, in partnership with the Northern Territory Department of Environment and Natural Resources and Power and Water Corporation, undertook an extensive program of hydrogeological investigations in the SSC Project area between 2017 and 2019. Data acquisition included; helicopter airborne electromagnetic (AEM) and magnetic data; water bore drilling; ground-based and downhole geophysical data for mapping water content and defining geological formations; hydrochemistry for characterising groundwater systems; and landscape assessment to identify potential managed aquifer recharge (MAR) targets. This report focuses on the Tennant Creek region—part of the Barkly region of the Northern Territory. Investigations in this region utilised existing geological and geophysical data and information, which were applied in the interpretation and integration of AEM and ground-based geophysical data, as well as existing and newly acquired groundwater hydrochemical and isotope data. The AEM and borehole lithological data reveal the highly weathered (decomposed) nature of the geology, which is reflected in the hydrochemistry. These data offer revised parameters, such as lower bulk electrical conductivity values and increased potential aquifer volumes, for improved modelling of local groundwater systems. In many instances the groundwater is shown to be young and of relatively good quality (salinity generally <1000 mg/L total dissolved solids), with evidence that parts of the system are rapidly recharged by large rainfall events. The exception to this is in the Wiso Basin to the west of Tennant Creek. Here lower quality groundwater occurs extensively in the upper 100 m below ground level, but this may sit above potentially potable groundwater and that possibility should be investigated further. Faults are demonstrated to have significantly influenced the occurrence and distribution of weathered rocks and of groundwater, with implications for groundwater storage and movement. Previously unrecognised faults in the existing borefield areas should be investigated for their potential role in compartmentalising groundwater. Additionally a previously unrecognised sub-basin proximal to Tennant Creek may have potential as a groundwater resource or a target for MAR. This study has improved understanding of the quantity and character of existing groundwater resources in the region and identified a managed aquifer recharge target and potential new groundwater resources. The outcomes of the study support informed water management decisions and improved water security for communities; providing a basis for future economic investment and protection of environmental and cultural values in the Tennant Creek and broader Barkly region. Data and information related to the project are summarised in the conclusions of this report and are accessible via the EFTF portal (https://portal.ga.gov.au/).

This report presents a summary of the groundwater hydrochemistry data release from the Western Davenport project conducted as part of Exploring for the Future (EFTF). This data release records the groundwater sample collection methods and hydrochemistry and isotope data from monitoring bores in the Western Davenport project area, Northern Territory (NT). The Western Davenport project is a collaborative study between Geoscience Australia and the NT Government. Hydrochemistry and isotope data were collected from existing and newly drilled bores in the Western Davenport area.

Geoscience Australia and its predecessors have analysed hydrochemistry of water sampled from boreholes (both pore water and groundwater), surface features, and rainwater. Sampling was undertaken during drilling or monitoring projects, and this dataset represents a significant subset of stored analyses. Water chemistry including isotopic data is essential to better understand groundwater origins, ages and dynamics, processes such as recharge and inter-aquifer connectivity and for informing conceptual and numerical groundwater models. This GA dataset underpins a nationally consistent data delivery tool and web-based mapping to visualise, analyse and download groundwater chemistry and environmental isotope data. This dataset is a spatially-enabled groundwater hydrochemistry database based on hydrochemistry data from projects completed in Geoscience Australia. The database includes information on physical-chemical parameters (EC, pH, redox potential, dissolved oxygen), major and minor ions, trace elements, nutrients, pesticides, isotopes and organic chemicals. Basic calculations for piper plots colours are derived from Peeters, 2013 - A Background Color Scheme for Piper Plots to Spatially Visualize Hydrochemical Patterns - Groundwater, Volume 52(1) <https://doi.org/10.1111/gwat.12118>. Upon loading the data to the database, all hydrochemistry data are assessed for reliability using Quality Assurance/Quality Control procedures and all datasets were standardised. This data is made accessible with open geospatial consortium (OGC) web services and is discoverable via the Geoscience Australia Portal (<a href="https://portal.ga.gov.au/">https://portal.ga.gov.au/</a>). This dataset is published with the permission of the CEO, Geoscience Australia.