Adelaide LiDAR 2008 data was flown by AAMHatch between 13th to 19th September 2008 as part of the Urban Digital Elevation Modelling in High Priority Areas Project funded by the Federal Department of Climate Change. Several data gaps existed in the intital survey due to operational instrumentation errors and a subsequent refly was conducted on 5th January 2009 to complete the dataset. The data was captured with point density of 0.8m point per square metre and overall vertical accuracy has been confirmed at <15cm (68% confidence level). The data are available as mass point files (LAS) comprising ground, thinned ground and non ground points in 2km tiles. A hydrologically conditioned and drainage enforced 2m DEM or HDEM has also been developed in 2010 as part of the Urban DEM project managed by the CRC for Spatial Information and Geoscience Australia. The HDEM was produced by SKM using the ANUDEM program. The HDEM ensures that primary stream/channel flow, and water flow across the land surface are accurately represented. The hydrologically enforced elevation model should be used for any water modelling. Adelaide Hydrological Enforced DEM(HDEM) 2008

Darwin and surrounds LiDAR 2009 data was flown by Dugro Spatial Solutions Ltd between 4th and 5th of July 2009 as part of the Urban Digital Elevation Modelling in High Priority Areas Project funded by the Federal Department of Climate Change. Distibution of this product is in file format of 1km tiles, and 1m DEM data in ESRI floating point file format. The data has a horizontal accuracy of 0.15m (at one SD) and vertical accuracy of 0.2m (at one SD).

These datasets cover approximately 22 sq km over all of Wednesday Island within the Torres Strait Island Regional Council and are part of the 2010 Torres Strait Islands LiDAR capture project. This project, undertaken by Vekta Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI grid - 0.25 metre contours in ESRI Shape

The CHM grid covers the whole of the Cocos (Keeling) Islands. It was provided by AAM Pty Ltd in 1km tiles which were then joined together using ESRI ArcMap. Each grid cell (2m x 2m) contains the maximum vegetation height in metres derived from the 2011 LiDAR aerial survey data.

The Perth 2008 LiDAR data was captured over the Perth region during February, 2008. The data was acquired by AAMHatch (now AAMGroup) and Fugro Spatial Solutions through a number of separate missions as part of the larger Swan Coast LiDAR Survey that covers the regions of Perth, Peel, Harvey, Bunbury and Busselton. The project was funded by Department of Water, WA for the purposes of coastal inundation modelling and a range of local and regional planning. The data are made available under licence for use by Commonwealth, State and Local Government. The data was captured with point density of 1 point per square metre and overall vertical accuracy has been confirmed at <15cm (68% confidence). The data are available as a number of products including mass point files (ASCII, LAS) and ESRI GRID files with 1m grid spacing. A 2m posting hydrologically enforced digital elevation model (HDEM) and inundation contours has also been derived for low lying coastal areas.

These datasets cover approximately 114 sq km over the Kowanyama Community within the Kowanyama Shire Council and are part of the 2010 Gulf LiDAR capture project. This project, undertaken by Vekta Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI grid - 1 metre Digital Elevation Model (DEM) in ASCII grid - 0.25 metre contours in ESRI Shape

These datasets covering all of the Sunshine Coast Regional Council were captured under the 2008/9 Sunshine Coast LiDAR capture project. This project, undertaken by Schlencker Mapping Pty Ltd on behalf of the Sunshine Coast Regional Council captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground and non-ground)

Demtiles (a concatenation of DEM tiles) contains some samples of a representation of the Digital Elevation Model as TIFF images.

These datasets cover approximately 210 sq km along the eastern sector of the Cairns Regional Council and over all of Fitzroy Island and are part of the 2009 North Queensland LiDAR capture project. This project, undertaken by Photomapping Services on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - LAS ground classified returns in shapefile format - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 0.25 metre contours in ESRI Shape - 1 metre Digital Elevation Model (DEM) in ESRI grid

These datasets cover approximately 1100 sq km in the central sector of the Hinchinbrook Shire Council and over all of Orpheus Island and are part of the 2009 Tropical Coast LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 2 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape