This web service provides access to the Geoscience Australia (GA) ISOTOPE database containing compiled age and isotopic data from a range of published and unpublished (GA and non-GA) sources. The web service includes point layers (WFS, WMS, WMTS) with age and isotopic attribute information from the ISOTOPE database, and raster layers (WMS, WMTS, WCS) comprising the Isotopic Atlas grids which are interpolations of the point located age and isotope data in the ISOTOPE database.

Geoscience Australia and Monash University have produced a series of renewable energy capacity factor maps of Australia. Solar photovoltaic, concentrated solar power, wind (150 m hub height) and hybrid wind and solar capacity factor maps are included in this web service. Solar Photovoltaic capacity factor map The minimum capacity factor is <10% and the maximum is 25%. The map is derived from Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Concentrated Solar Power capacity factor map The minimum capacity factor is 52% and the maximum is 62%. The map is derived from Bureau of Meteorology (2020) data. Minimum exposure cut-off values used are from International Renewable Energy Agency (2012) and Wang (2019). The scientific colour map is sourced from Crameri (2018). Wind (150 m hub height) capacity factor map The minimum capacity factor is <15% and the maximum is 42%. The map is derived from Global Modeling and Assimilation Office (2015) and DNV GL (2016) data. The scientific colour map is sourced from Crameri (2018). Hybrid Wind and Solar capacity factor maps Nine hybrid wind and solar maps are available, divided into 10% intervals of wind to solar ratio (eg. (wind 40% : solar 60%), (wind 50% : solar 50%), (wind 60% : solar 40%) etc.) For all maps the minimum capacity factor is <25% and the maximum is 64%. The maps are derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Disclaimer The capacity factor maps are derived from modelling output and not all locations are validated. Geoscience Australia does not guarantee the accuracy of the maps, data, and visualizations presented, and accepts no responsibility for any consequence of their use. Capacity factor values shown in the maps should not be relied upon in an absolute sense when making a commercial decision. Rather they should be strictly interpreted as indicative. Users are urged to exercise caution when using the information and data contained. If you have found an error in this dataset, please let us know by contacting clientservices@ga.gov.au.

This service delivers airborne electromagnetics (AEM) derived conductivity grids for depth intervals representing the top 22 layers from AEM modelling in the West Musgrave region (https://dx.doi.org/10.26186/147969). The grids were generated from the AEM conductivity models released as part of the Western Resource Corridor AusAEM survey (https://dx.doi.org/10.26186/147688), the Earaheedy and Desert Strip AusAEM survey (https://pid.geoscience.gov.au/dataset/ga/145265) and several industry surveys (https://dx.doi.org/10.26186/146278) from the West Musgraves region. The AEM conductivity models resolve important subsurface features for assessing the groundwater system including lithological boundaries, palaeovalleys and hydrostatigraphy.

This service contains the NATMAP 1:250,000 scale maps, from the NATMAP Digital Maps 2008 DVD. The large scale single mosaic map covers the entire continent, and is based on the Geocentric Datum of Australia 1994 (GDA94) geographic projection. The maps have been revised using a variety of data sources, including SPOT and Landsat satellite imagery, other government agency information and data supplied by private companies and individuals. The original DVD was produced by Geoscience Australia's National Mapping Division and its predecessor, the Australian Surveying and Land Information Group (AUSLIG).

The Mineral Potential web service provides access to digital datasets used in the assessment of mineral potential in Australia. The service includes maps showing the potential for sediment-hosted base metal mineral systems in Australia.

This web service contains map layers and coverages for machine learning models, using raster datasets which include radiometric grid infill, cover depths and conductivity. All grids have been converted to cloud-optimised GeoTIFF (COG) format for use and delivery from an cloud-based object store (AWS s3).

This web service provides access to geological, hydrogeological and hydrochemical digital datasets that have been published by Geoscience Australia for the Great Artesian Basin (GAB).

This service provides access to airborne electromagnetics (AEM) derived conductivity grids in the Upper Darling Floodplain region. The grids represent 30 depth intervals from modelling of AEM data acquired in the Upper Darling Floodplain, New South Wales, Airborne Electromagnetic Survey (https://dx.doi.org/10.26186/147267), an Exploring for the Future (EFTF) project jointly funded by Geoscience Australia and New South Wales Department of Planning and Environment (NSW DPE). The AEM conductivity model delineates important subsurface features for assessing the groundwater system including lithological boundaries, palaeovalleys and hydrostatigraphy.

This web service provides access to gridded data produced by Geoscience Australia from studies of Australian groundwater and hydrogeological systems.

This service represents models of the structure and composition of the lithospheric mantle. The service currently delivers grids generated from modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform.