includes part of Shepparton and only area of Wangaratta flown by AGSO, approx. 50% of the sheet 22-1/J55-02/19 Contour interval: 5

longitude = 142.5 to 144.1 east, latitude = standard 22-1/D54-16/19 Contour interval: 10

elevation contours 22-1/F54-14/19 Contour interval: 2

No abstract available

22-1/G54-14/19 Contour interval: 2

Moreton Bay 2009 LiDAR data was captured over the Moreton Bay Regional Council area between March and June 2009. The data was acquired by AAM Hatch (now AAMGroup) and funded by Queensland and Commonwealth governments. The project area covering 2440sqkm is licenced for use by all Commonwealth, State and Local Government organisations. Data acquisition and post-processing has been controlled to achieve a vertical accuracy witihn 0.15m (RMS, 68% CI) and horizontal accuracy within 0.45 m. Horizontal coordinates are based upon Map Grid of Australia (MGA) Zone 56 projection. Vertical coordinates are referenced to Australian Height Datum (AHD). The data was captured with point density of 2.5 points per square metre and the data is available as mass point files (ASCII, LAS) and ESRI GRID files with 1m grid spacing in 1km tiles.

100 m line spacing 22-2/H54-14/19-5 Contour interval: 1

These datasets cover approximately 27 sq km over all of Mabuiag Island within the Torres Strait Island Regional Council and are part of the 2010 Torres Strait Islands LiDAR capture project. This project, undertaken by Vekta Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI grid - 0.25 metre contours in ESRI Shape

22-1/D52-13/19 Contour interval: 5

AAMHatch acquired Airborne Laser Scanning (ALS) data for the Sydney Metropolitan area between 11 June 2007 & 7 July 2007 and again in February to June 2008. The source data are available as mass points (ASCII XYZ, LAS) and Gridded 2m and 10m DEM tiles or 2m Mosaic. The vertical accuracy is 0.15m at 1 sigma in open clear ground as specified in the project scope. All data are referenced to GDA94/MGA Zone 56 and AHD using independent survey control which means the project area is not seamless and height difference between the 2007 and 2008 data will exist. A hydrologically enforced elevation model is available for this product, which should be used for any water modelling.