In 2010, a network of Marine Protected Areas (MPAs) was proposed for the East Antarctic region. This proposal was based on the best available data, which for the benthic regime consisted chiefly of seabed geomorphology and satellite bathymetry data. Case studies from the East Antarctic region indicate that depth and morphology are important factors in delineating marine benthic communities, particularly on the continental shelf. However, parameters such as sediment composition also show a strong association with the distribution and diversity of benthic assemblages. A better assessment of the nature of benthic habitats within the proposed MPA network is now possible with the incorporation of a compilation of sediment properties and higher resolution bathymetry grids across the East Antarctic region (see Figures A and B). Based on these physical properties, and in combination with the seabed morphology, we can now distinguish a range of distinct habitats, such as deep muddy basins, scoured sandy shelf banks, ruggedly eroded slope canyons and muddy deep sea plains. In this presentation, we assess the types of benthic habitats across the East Antarctic region, and then determine how well the proposed MPA network represents the diversity of habitats across this margin. The diversity of physical environments within the proposed MPAs suggests that they likely support a diverse range of benthic communities which are broadly representative of the surrounding region.

A short animation of an atmospheric simulation of methane emissions from a coal mine (produced using TAPM) compared to actual methane concentrations detected by the Atmospheric Monitoring Station, Arcturus in Central Queensland. It illustrates the effectiveness of both the detection and simulation techniques in the monitoring of atmospheric methane emissions. The animation shows a moving trace of both the simulated and actual recorded emissions data, along with windspeed and direction indicators. Some data provided by CSIRO Marine and Atmospheric Research.

Geoscience Australia often produces spatially continuous marine environmental information products using spatial interpolation methods. The accuracy of such information is critical for well-informed decisions for marine environmental management and conservation. Improving the accuracy of these data products by searching for robust methods is essential, but it is a vexed task since no method is best for all variables. Therefore, we experimentally compared the performance of 32 methods/sub-methods using seabed gravel content data from the Australian continental EEZ. In this study, we have identified and developed several novel and robust methods that significantly increase the accuracy of interpolated spatial information. Moreover, these methods can be applied to various environmental properties in both marine and terrestrial disciplines.

Anthropogenic threats to benthic habitats do not pose an equal risk, nor are they uniformly distributed over the broad depth range of marine habitats. Deep sea benthic environments have, by and large, not been heavily exploited and most are in relatively good condition. In contrast, shelf and coastal habitats, and deep ocean pelagic fisheries, have been exploited extensively and human impacts here are locally severe. A critical point is that anthropogenic threats do not act in isolation; rather, they are cumulative and the impacts are compounded for every affected habitat. In general, the impacts of humans on benthic habitats is poorly understood. Habitat mapping provides condition assessments and establishes baselines against which changes can be measured. GeoHab scientists ranked the impacts on benthic habitats from fishing as the greatest threat, followed by pollution and litter, aggregate mining, oil and gas, coastal development, tourism, cables, shipping, invasive species, climate change and construction of wind farms. The majority of authors (84%) reported that monitoring changes in habitat condition over time was a planned or likely outcome of the work carried out. In this chapter the main anthropogenic threats to benthic habitats are reviewed in relation to their potential impacts on benthic environments.

Data gathered in the field during the sample collection phase of the National Geochemical Survey of Australia (NGSA) has been used to compile the Preliminary Soil pH map of Australia. The map, which was completed in late 2009, offers a first-order estimate of where acid or alkaline soil conditions are likely to be expected. It provides fundamental datasets that can be used for mineral exploration and resource potential evaluation, environmental monitoring, landuse policy development, and geomedical studies into the health of humans, animals and plants.

Geoscience Australia and CO2CRC have constructed a greenhouse gas controlled release facility to simulate surface emissions of CO2 (and other greenhouse gases) from the soil into the atmosphere under controlled conditions. The facility is located at an experimental agricultural station maintained by CSIRO Plant Industry at Ginninderra, Canberra. The design of the facility is modelled on the ZERT controlled release facility in Montana. The facility is equipped with a 2.5 tonne liquid CO2 storage vessel, vaporiser and mass flow controller unit with a capacity for 6 individual metered CO2 gas streams (up to 600 kg/d capacity in total). Injection of CO2 into the soil is via a 120m long slotted HDPE pipe installed horizontally 2m underground. This is equipped with a packer system to partition the well into six CO2 injection chambers. The site is characterised by the presence of deep red and yellow podsolic soils with the subsoil containing mainly kaolinite and subdominant illite. Injection is above the water table. The choice of well orientation based upon the effects of various factors such as topography, wind direction, soil properties and ground water depth will be discussed. An above ground release experiment was conducted from July - October 2010 leading to the development of an atmospheric tomography technique for quantifying and locating CO2 emissions1. An overview of monitoring experiments conducted during the first subsurface release (January-March 2012), including application of the atmospheric tomography technique, soil flux surveys, microbiological surveys, and tracer studies, will be presented. Additional CO2 release experiments are planned for late 2012 and 2013. Poster presented at 11th Annual Conference on Carbon Capture Utilization & Sequestration, April 30 - May 3, 2012, Pittsburgh, Pennsylvania

Mean monthly and mean annual maximum, minimum & mean temperature grids. The grids show the temperature values across Australia in the form of two-dimensional array data. The mean data are based on the standard 30-year period 1961-1990. Gridded data were generated using the ANU (Australian National University) 3-D Spline (surface fitting algorithm). As part of the 3-D analysis process a 0.025 degree resolution digital elevation model (DEM) was used. The grid point resolution of the data is 0.025 degrees (approximately 2.5km). Approximately 600 stations were used in the analysis over Australia. All input station data underwent a high degree of quality control before analysis, and conform to WMO (World Meteorological Organisation) standards for data quality.

There is growing awareness of the scientific and intrinsic value of Antarctic geological features, including sites containing rare, and in some cases, globally unique mineral occurrences, mineral assemblages, and unusual rocks features (e.g. ventifacts) and rare fossils. However, the global economic value of the mineral and fossil trade is also considerable and growing, with prized specimens being sold for prices per gram equivalent to that of gold. Locations of geological value, once considered 'protected' by virtue of the logistical complexity and prohibitive cost involved in collection, are becoming increasingly vulnerable as the interest of collectors grows and the inaccessibility of Antarctica diminishes with more frequent visits by private and adventure travellers. Thus the need for proactive intervention, protection and management of 'geo-heritage' sites is becoming increasingly urgent. Wider recognition of the geological values of sites achieved by invoking the provisions for area management of the Madrid Protocol will also help mitigate casual souveniring and accidental or deliberate damage caused by ill-advised construction or other human activity, such as use of heavy machinery.

This is a 3 minute movie (with production music), to be played in the background during the October 28th 2010 Geoscience Australia Parlimentary Breakfast. The video shows a wide range of the types of activities that GA is involved in. These images include GA people doing GA activities as well as some of the results of offshore surveys; continental mapping; eath monitoring etc. The movie will be played as a background before and after GA's CEO (Chris Pigram) presentation.

Explaining spatial variation and habitat complexity of benthic habitats from underwater video through the use of maps. Different methodologies currently used to process and analyse percent cover of benthic organisms from underwater video will be addressed and reviewed.