Geoscience Australia's GEOMACS model was utilised to produce hindcast hourly time series of bed shear stress on the Australian continental shelf on a 0.1 degree grid covering the period March 1997 to February 2008 (inclusive). The effective depth range of the model output is approximately 20 - 150 m (see 'Data Quality Attribute Accuracy' below). The hindcast data represents the combined contribution to the bed shear stress by waves, tides, wind and density-driven circulation. The stability of the seabed sediment surface, which is controlled by seabed shear stress, is likely to influence benthic community structure and species diversity. There are 8 grids in the dataset: geomacs_excee, geomacs_gmean, geomacs_qua25, geomacs_qua50, geomacs_qua75, geomacs_range, geomacs_ratio, and geomacs_tmean. Please see the metadata for further information.

The Petrel Sub-basin Marine Environmental Survey GA-0335, (SOL5463) was undertaken by the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between the Australian Institute of Marine Science (AIMS) and GA. The purpose was to acquire geophysical and biophysical data on shallow (less then 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas. This dataset has analysis of Chlorin and geochemmistry for samples taken on survey.

The Petrel Sub-basin Marine Environmental Survey GA-0335, (SOL5463) was undertaken using the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between the Australian Institute of Marine Science (AIMS) and GA. The purpose was to acquire geophysical and biophysical data on shallow (less then 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas. This 10 sample data-set comprises sediment oxygen demand data (expressed as % saturation per gram dry weight) from surface seabed sediments (~0-2 cm) in the Timor Sea.

The Petrel Sub-basin Marine Environmental Survey GA-0335, (SOL5463) was undertaken using the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between the Australian Institute of Marine Science (AIMS) and GA. The purpose was to acquire geophysical and biophysical data on shallow (less then 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas. This 10 sample data-set comprises specific surface area and bulk (%) carbonate data from surface seabed sediments (~0-2 cm) in the Timor Sea.

The Petrel Sub-basin Marine Survey GA-0335 (SOL5463) was undertaken on RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was a collaboration between the Australian Institute of Marine Science (AIMS) and GA. The purpose was to acquire geophysical and biophysical data on shallow (less than 100 m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support the investigation of CO2 storage potential in these areas. Unconsolidated surface (seabed) sediments were collected at 11 sampling stations using a Smith_McIntyre grab (10L volume). Sediment samples were collected to provide data on a) sedimentology, b) infauna and c) the geochemical composition of the sediments. For the sedimentology (this dataset) up to 250 g of sediment was sub-sampled from the surface (0-2 cm) of the sediment recovered in the Smith_McIntyre grabs. Sub-samples were described from visual inspection, noting grain size, sorting and composition and these were stored in plastic bags and refrigerated. These were subsequently analysed at the GA laboratories to provide information on the texture and composition of the sediments at the sampling locations. Grain size measurement was undertaken by wet sieving to determine mud (<63 microns), sand (63-2000 microns) and gravel (>2000 microns) fractions as percentage of dry weight. A separate sub-sample (~1g) was used for laser diffraction measurement of the mud and sand fractions using a Malvern Mastersizer 2000, with results expressed as percentage of the total particle volume based on an average of three measurements on each sample. Particle size distributions including mean, median, and standard deviation, together with skewness and kurtosis indices were calculated. Separate sample splits were taken for measurement of the carbonate content using the carbonate bomb method following Muller and Gastner (1979).

Seabed sediment data were extracted from Geoscience Australia's MARine Sediment database (MARS - http://www.ga.gov.au/oracle/mars/). They include the percentage of carbonate in the sediment, and the percentage of mud, sand, or gravel size material found in seabed sediment samples, throughout the Australian Exclusive Economic Zone. The data grids were created using ArcGIS Inverse Distance Squared Weighted methodology.

The Petrel Sub-basin Marine Survey GA-0335 (SOL5463) was undertaken by the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was a collaboration between the Australian Institute of Marine Science (AIMS) and GA. The purpose was to acquire geophysical and biophysical data on shallow (less then 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas. This dataset contains identifications of animals collected from 21 Smith-McIntyre grabs deployed during GA-334. Biological specimens were collected from Smith-McIntyre grabs. Sediment was elutriated for ~ 5 minutes over a 500um sieve. Retained sediments and animals were then preserved in 70% ethanol for later laboratory sorting and identification (see 'lineage'). The dataset is current as of November 2012, but will be updated as taxonomic experts contribute. Stations are named XXGRYY where XX indicates the station number, GR indicates Smith-Mac grab, and YY indicates the sequence of grabs deployed (i.e. the YYth grab on the entire survey).

The Petrel Sub-basin Marine Environmental Survey GA-0335, (SOL5463) was undertaken by the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between the Australian Institute of Marine Science (AIMS) and GA. The purpose was to acquire geophysical and biophysical data on shallow (less then 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas. This dataset comprises TCO2 pools (0-2cm) and fluxes calculated from bottle incubation experiments (24 hours).

The survey was undertaken as a collaboration between Geoscience Australia and the Australian Institute of Marine Science (AIMS). The purpose was to acquire geophysical and biophysical data on shallow (less than 100 m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas. Sub bottom profiler data were acquired using a sparker source and a 24 channel streamer, and processed as shallow, high resolution, multi-channel seismic reflection data.

The Petrel Sub-basin Marine Environmental Survey GA-0335, (SOL5463) was undertaken using the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between the Australian Institute of Marine Science (AIMS) and GA. The purpose was to acquire geophysical and biophysical data on shallow (less then 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas. This dataset comprise TOC, TN and carbon and nitrogen isotope data from surface sediments (0-2cm) in the Timor Sea.