This service has been created specifically for display in the National Map and the symbology displayed may not suit other mapping applications. Information included within the service includes the point locations for surface hydrology, including natural and man-made features such as water courses (including directional flow paths), lakes, dams and other water bodies and marine themes. The data is sourced from Geoscience Australia 250K Topographic data and Surface Hydrology data. The service contains layer scale dependencies.

This service provides Australian surface hydrology, including natural and man-made features such as water courses (including directional flow paths), lakes, dams and other water bodies. The information was derived from the Surface Hydrology database, with a nominal scale of 1:250,000. The National Basins and Catchments are a national topographic representation of drainage areas across the landscape. Each basin is made up of a number of catchments depending on the features of the landscape. This service shows the relationship between catchments and basins. The service contains layer scale dependencies.

This service has been created specifically for display in the National Map and the symbology displayed may not suit other mapping applications. The service includes natural and man-made surface hydrology features, such as water courses (including directional flow paths), lakes, dams and other water bodies and marine themes. The data is sourced from Geoscience Australia 250K Topographic data and Surface Hydrology data. The service contains layer scale dependencies.

A structural transect along a ridge entering Wheeny Gap from the west provides important insight into the nature of faults comprising the Lapstone Structural Complex (LSC). Sheared sandstone outcropping along the ridge east of the Kurrajong fault scarp suggests that the Kurrajong Fault is a steeply east-dipping reverse-fault, in accordance with the interpretation of seismic profiles further to the south. A previously unrecognised west-dipping reverse fault (Wheeny Gap Fault) with at least several tens of metres of displacement was observed in a cliff face on the northern side of Wheeny Gap, several hundred metres east of the Kurrajong Fault. Relatively recent activity is suggested on the Wheeny Gap Fault as it laterally displaces the cliff face formed during the passage of a knickpoint relating to initial relief generation across the Lapstone Monocline up Wheeny Creek. Earthquake hypocentres recorded over the last several decades occur predominantly at depth to the west, and have been used to suggest the presence of a blind west-dipping reverse fault, into which the Kurrajong and Wheeny Gap faults must link at depth. We present an evolutionary model for the LSC based upon this architecture which reconciles evidence for late Cenozoic uplift across the LSC and the observation that the Rickabys Creek Gravels overlie shale on the Cumberland Plain and sandstone on the Lapstone Monocline. This model suggests that the findings of a major seismic hazard assessment of the Sydney Basin, which concludes that magnitude MW7.0 and greater earthquake events might be expected on the LSC on average every 15-30 ka, should be treated with caution. This expectation of regular recurrence must be tempered by the possibility that a large part of the relief relating to the complex might have formed in the late Miocene or earlier, and the evidence from other Australian intraplate faults suggesting that large earthquake occurrence is markedly temporally clustered.

This service has been created specifically for display in the National Map and the symbology displayed may not suit other mapping applications. Information included within the service includes the polygon/area locations for surface hydrology, including natural and man-made features such as water courses (including directional flow paths), lakes, dams and other water bodies and marine themes. The data is sourced from Geoscience Australia 250K Topographic data and Surface Hydrology data. The service contains layer scale dependencies.

The AusHydro database provides a seamless surface hydrography layer for Australia at a nominal scale of 1:250,000. It consists of lines, points and polygons representing natural and man-made features such as water courses, lakes, dams and other water bodies. The natural water course layer consists of a linear network with a consistent topology of links and nodes that provide directional flow paths through the network for hydrological analysis. This network was used to produce the National 9 second Digital Elevation Model (DEM) of Australia (http://www.ga.gov.au/nmd/products/digidat/dem_9s.jsp). Surface Hydrology Dataset is an amalgamation of two primary datasets. The first is the hydrographic component of the GEODATA TOPO 250K Series 3 product released by Geoscience Australia in 2006 . The Series 3 dataset contains the following hydrographic features: canal lines, locks, rapid lines, spillways, waterfall points, bores, canal areas, flats, lakes, pondage areas, rapid areas, reservoirs, springs, watercourse areas, waterholes, water points, marine hazard areas, marine hazard points and foreshore flats.It also provides information on naming, hierarchy and perenniality. The dataset also contains Cultural and Transport features that may intersect with hydrography features. These include: Railway Tunnels, Rail Crossings, Railway Bridges, Road Tunnels, Road Bridges, Road Crossings, Water Pipelines. Refer to the GEODATA TOPO 250K Series 3 User Guide http://www.ga.gov.au/image_cache/GA8349.pdf for additonal information The second primary dataset is based on the GEODATA TOPO-250K Series 1 water course lines completed by Geoscience Australia in 1994, which has been supplemented by additional line work captured by the Australian National University during the production of the 9 second DEM to improve the representation of surface water flow. This natural watercourse dataset consists of directional flow paths and provides a direct link to the flow paths derived from the DEM. There are approximately 700,000 more line segments in this version of the data. AusHydro 1.0 uses the natural watercourse geometry from the ANU-enhanced Series 1 data, and the attributes (names, perenniality and hierarchy) associated with Series 3 to produce a fully attributed data set with topologically correct flow paths. The attributes from Series 3 were attached using spatial queries to identify common features between the 2 datasets. Additional semi-automated and manual editing was then undertaken to ensure consistent attribution along the entire network. WatercourseLines includes a unique identifier for each line segment (AusHydro-ID) which will be used to maintain the dataset, and to incorporate higher resolution datasets in the future. The AusHydro-ID will be linked to the ANUDEM-Derived (raster) streams through a common segment identifier, and ultimately to a set of National Catchments and Reporting Units (NCRU). Purpose Surface Hydrology Dataset is the reconciliation of the hydrological features in the two data sets to produce a single authoritative national stream network and water body data set suitable for hydrological analysis at national scales. It uses the natural watercourse geometry from the ANU-enhanced Series 1 data, and the attributes (names, perenniality and hierarchy) associated with Series 3 to produce a fully attributed data set with topologically correct flow paths.

This service provides Australian surface hydrology, including natural and man-made features such as water courses (including directional flow paths), lakes, dams and other water bodies. The information was derived from the Surface Hydrology database, with a nominal scale of 1:250,000. The service contains layer scale dependencies.

This service provides Australian surface hydrology, including natural and man-made features such as water courses (including directional flow paths), lakes, dams and other water bodies. The information was derived from the Surface Hydrology database, with a nominal scale of 1:250,000. The service contains layer scale dependencies.

The Australian Topographic map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. SS, MS and LS refer to Small, Medium and Large Scale datasets.

The Lapstone Structural Complex (LSC) comprises a series of north-trending faults and monoclinal flexures forming the eastern margin of the Blue Mountains Plateau, ~50 km west of the Sydney CBD. The LSC is considered a potential source of large earthquakes, however its evolution, and in particular its tectonic history is not well constrained. The LSC is bounded to the west by the Kurrajong Fault System (KFS), a series of <i>en echelon </i>reverse faults downthrown to the west. Streams crossing the LSC oversteepen by about 2-5 times over these faults. This study aims, through longitudinal profile analysis of 18 streams crossing the LSC coupled with field observation, to determine whether the oversteepening can be attributed to a lithological change at the faults, or tectonically-induced disequilibrium. Two approaches are used. Firstly, plots of log slope versus log distance (DS plots) are produced for each of the streams. As a result of noise in the topographic data, these results are inconclusive in demonstrating either situation. Secondly, an area-slope relationship, defined by <i>A^0.4S</i> (where A = area and S = slope), is plotted against downstream distance. This factor is derived from the stream incision law, <i>dz/dt </i>= <i>KA^mSⁿ</i>, where <i>K</i> is assumed to be constant, and <i>m</i> and<i> n</i> are positive constants relating to erosional processes, and basin hydrologic and geometric factors. The analysis shows that in all but two streams, values for <i>A^0.4S</i> are at a maximum over the LSC. Peak <i>A^0.4S</i> values of about 0.2 are estimated to be equivalent to vertical incision rates of about 70 m/Ma. <i>A^0.4S</i> varies with lithology; however the lithological effect is demonstrated to be of similar magnitude or smaller than the apparent structural control exerted by the LSC. All streams with catchment areas less than 100 km² have developed swamps upstream of faults on the LSC. Sediment accumulated in these swamps is generally 0.5-4 m thick, but reaches 14 m in Burralow Swamp. In Blue Gum Creek and Burralow Swamps, the sedimentary sequence includes an organic clay layer indicative of low-energy depositional conditions. Previous radiocarbon dating and pollen analysis suggests the sediment is of Pleistocene age. The elevation of the clay layer is similar to that of bedrock downstream of the faults, consistent with damming related to from tectonically induced uplift.