This map has been produced for a court case for the Fair Work Ombudsman. The points on the map were sourced from documents supplied by the Fair Work Ombudsman. Boundaries sourced from AMB v2.0 Refer to Advice Register 679. Location M:\advice\fwo

This map has been produced after receiving a request from Attorney-General's Departmen regarding the location of Whaling Ship near Antarctica. Contact is Camille Goodman The map was created from an existing map for DFAT named whaling_contingency08-09.pdf located in the whaling issues directory for DFAT. This map is for official use only and not to be released to the public. LOSAMBA advice register - 678

Map depicting the proposed new Two Way Route throught the Great Barrier Reef for consultative purposes. Distributed solely for comment , not in force. NOT FOR NAVIGATION. Vector and point data of proposed Two Way Route and Vessel position copyright 2013 Australian Marine Safety Authority. Access to Hydro Charts has been provided on the basis that they should be used for review of waterspace management changes in the GBR only. Additionally, as the charts have been de-projected, and subject to the normal practices of notice to Mariners, which will gradually render these particular editions outdated over time, they should not be used for navigation.

The dataset was created by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the current Australian Maritime Boundary Dataset 2014 (AMB2014a). This version contains a number of technical amendments made on the basis of user feedback. These include: - Removal of lease AC/P17 - Harmonisation of maritime boundaries, scheduled area and graticular block datasets in block SC51 The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be known to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. Existing production licences AC/RL4, and AC/RL5 are included in the dataset. The blocks are attributed with fields containing information on: - Block ID - Parent 1 Million Mapsheet - Offshore Area - Epoch of the boundaries used to cut the data AMB2014 - Datum - Origin of the mapsheet in AGD66 - The position of all vertices in the block - The number of vertices in the block - The area of the block in acres - The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

Mark Alcock received an email request from IODP. IODP has requested GA to prepare a map for the proposed IODP drilling site. Not for sale or public distribution. Refer to Advice Register - 685

The dataset was created by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the historical Australian Maritime Boundary Dataset 2006 (AMB2006). This version contains a number of technical amendments made on the basis of user feedback. These include: - Harmonisation of maritime boundaries, scheduled area and graticular block datasets in block SC51 The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be known to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. Existing production licences AC/P17, AC/RL4, and AC/RL5 are included in the dataset. The blocks are attributed with fields containing information on: - Parent 1 Million Mapsheet - Offshore Area - Epoch of the boundaries used to cut the data AMB2001 - Datum - Origin of the mapsheet in AGD66 - The position of all vertices in the block - The number of vertices in the block - The area of the block in acres - The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

PLEASE NOTE: These data have been updated. See Related Links for new data. Australian Petroleum Blocks (2014) - Aligned with the current Australian Maritime Boundary Dataset (AMB2014) The digital realisation of Australia's Graticular Framework as set out under the Offshore Petroleum and Greenhouse Gas Storage Act 2006. ESRI Geodatabase. The dataset was created internally by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the current Australian Maritime Boundary Dataset (AMB2014). The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be know to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. Existing production licences AC/P17, AC/RL4, and AC/RL5 are included in the dataset. The blocks are attributed with fields containing information on: Block ID Parent 1 Million Mapsheet Offshore Area Epoch of the boundaries used to cut the data - AMB2014 Datum Origin of the mapsheet in AGD66 The position of all vertices in the block The number of vertices in the block The area of the block in acres The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

This dataset reflects the boundaries of those Indigenous Land Use Agreements (ILUA) that have entered the notification process or have been registered and placed on the Register of Indigenous Land Use Agreements (s199A, Native Title Act; Commonwealth). This is a national dataset. Aspatial attribution includes National Native Title Tribunal number, Name, Agreement Type, Proponent, Area and Registration Date.

This dataset reflects the external boundaries of all native title determination and compensation applications that are currently recognized and active within the Federal Court process. Applications that are non-active (i.e. withdrawn, dismissed, finalised, rejected or combined) are only included as aspatial records for completeness. This is a national dataset. This dataset depicts the spatial definition of active Claimant and Non-claimant native title determination applications and compensation applications. Where possible these may include internal boundaries or areas excluded. Aspatial attribution includes National Native Title Tribunal number, Federal Court number, application status and the names of both the NNTT Case Manager and Lead Member where assigned to the application. Applications included on the Schedule of Native Title (Federal Court) include all registered and unregistered applications as well as determined applications that are yet to be finalized.

This dataset attempts to reflect the boundaries of claimant applications for Native Title as per the Register of Native Title Claims (s185, Native Title Act; Commonwealth). This is a national dataset but data is stored by jurisdiction (State), for ease of use. Applications stored for each jurisdiction dataset include applications which overlap into adjoining jurisdictions as well as applications which overlap with these. This dataset depicts the spatial record of registered claimant applications. Aspatial attribution includes National Native Title Tribunal number, Federal Court number, application status and the names of both the NNTT Case Manager and Lead Member assigned to the application. Applicants of registered applications have the Right To Negotiate (RTN) with respect to certain types of Future Acts over the area being claimed. Whilst applications that are determined are recorded on a separate register, all registered applications remain on the Register of Native Title Claims until otherwise finalised.