This abstract is to be submitted for the Great Artesian Basin Coordinating Committee Researcher's Forum on 27th-28th of March 2013, as part of the Great Artesian Basin Water Resource Assessment launch at the event.

This abstract is to be submitted for the Great Artesian Basin Coordinating Committee Researcher's Forum on 27th-28th of March, as part of the Great Artesian Basin Water Resource Assessment launch at the event.

This Gunnedah Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Gunnedah Basin is an intracratonic, sedimentary basin in northern NSW. It forms the middle section of the greater Sydney-Gunnedah-Bowen Basin system and mainly consists of Permian and Triassic sedimentary rocks resting on Late Carboniferous to Early Permian volcanics. The Gunnedah Basin is overlain by the Surat Basin and the younger alluvial sediments associated with modern and ancient river systems. The Gunnedah Basin is not considered a single well-connected aquifer, rather a series of porous rock aquifers separated by several non-porous or poorly conductive layers. The Lachlan Fold Belt forms what is thought to be an effective basement although little information is known of its hydrogeological properties. All units of the Gunnedah Basin are of low permeability and significantly lower hydraulic conductivity than the overlying alluvial aquifers. Most of the groundwater resources in the area are extracted from either the overlying Surat Basin or younger alluvial aquifers. There is relatively little groundwater sourced from the aquifers of the Gunnedah Basin, except in areas where the overlying aquifers do not occur. The most viable groundwater source in the Gunnedah Basin are the more porous aquifers of the Triassic sequence.

This Clarence-Moreton Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The formation of the Clarence-Moreton Basin initiated during the Middle Triassic due to tectonic extension. This was followed by a prolonged period of thermal cooling and relaxation throughout the Late Triassic to the Cretaceous. Deposition of a non-marine sedimentary succession occurred during this time, with the Clarence-Moreton Basin now estimated to contain a sedimentary thickness of up to 4000 m. There were three main depositional centres within the basin, and these are known as the Cecil Plain Sub-basin, Laidley Sub-basin and Logan Sub-basin. The Clarence-Moreton Basin sediments were originally deposited in non-marine environments by predominantly northward flowing rivers in a relatively humid climate. The sedimentary sequences are dominated by a mixed assemblage of sandstone, siltstone, mudstone, conglomerate and coal. Changing environmental conditions due to various tectonic events resulted in deposition of interbedded sequences of fluvial, paludal (swamp) and lacustrine deposits. Within the Clarence-Moreton Basin, coal has been mined primarily from the Jurassic Walloon Coal Measures, including for the existing mines at Commodore and New Acland. However, coal deposits also occur in other units, such as the Grafton Formation, Orara Formation, Bundamba Group, Ipswich Coal Measures, and Nymboida Coal Measures. Overlying the Clarence-Moreton Basin in various locations are Paleogene and Neogene volcanic rocks, such as the Main Range Volcanics and Lamington Volcanics. The thickness of these volcanic rocks is typically several hundred metres, although the maximum thickness of the Main Range Volcanics is about 900 m. Quaternary sediments including alluvial, colluvial and coastal deposits also occur in places above the older rocks of the Clarence-Moreton Basin.

The Mesoproterozoic South Nicholson Basin, straddling the NT and QLD border, sits between, and partly overlies, the Paleoproterozoic components of the Mount Isa Province to the east and the southern McArthur Basin to the northwest. While the McArthur Basin and Mount Isa Province are comparatively well studied and considered highly prospective for both mineral and energy resources, rocks of the South Nicholson region are mostly undercover and, as such, there is incomplete understanding of their geological evolution and resource potential. Geoscience Australia (in collaboration with the Northern Territory Geological Survey and the Geological Survey of Queensland, and co-funded by AuScope) undertook the South Nicholson Basin deep crustal seismic reflection survey (e.g. Carr et al., 2019). This survey was conducted under the federally funded Exploring for the Future (EFTF) initiative, a $100.4 million, four year program to evaluate the resource potential across all of northern Australia.

The Onshore Basin Inventory is a summary of data and geological knowledge of hydrocarbon-prone onshore basins of Australia. Volume 1 of the inventory covers the McArthur, South Nicholson, Georgina, Wiso, Amadeus, Warburton, Cooper and Galilee basins. Under the Exploring for the Future (EFTF) program, Geoscience Australia expanded this work to compile the Onshore Basin Inventory volume 2, which covers the Officer, onshore Canning and Perth basins. These reports provide a whole-of-basin inventory of geology, petroleum systems, exploration status and data coverage. Each report also summarises aspects that require further work. The Onshore Basin Inventory has provided scientific and strategic direction for pre-competitive data acquisition under the EFTF energy work program. Here we provide an overview of the Onshore Basin Inventory, with emphasis on its utility in shaping the EFTF energy systems data acquisition and analysis program. <b>Citation:</b> Carr, L.K., Bailey, A.H.E., Palu, T.J. and Henson, P., 2020. Onshore Basin Inventory: building on Geoscience Australia’s pre-competitive work program with Exploring for the Future In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

<div>This data package contains interpretations of airborne electromagnetic (AEM) conductivity sections in the Exploring for the Future (EFTF) program’s Eastern Resources Corridor (ERC) study area, in south eastern Australia. Conductivity sections from 3 AEM surveys were interpreted to provide a continuous interpretation across the study area – the EFTF AusAEM ERC (Ley-Cooper, 2021), the Frome Embayment TEMPEST (Costelloe et al., 2012) and the MinEx CRC Mundi (Brodie, 2021) AEM surveys. Selected lines from the Frome Embayment TEMPEST and MinEx CRC Mundi surveys were chosen for interpretation to align with the 20&nbsp;km line-spaced EFTF AusAEM ERC survey (Figure 1).</div><div>The aim of this study was to interpret the AEM conductivity sections to develop a regional understanding of the near-surface stratigraphy and structural architecture. To ensure that the interpretations took into account the local geological features, the AEM conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This approach provides a near-surface fundamental regional geological framework to support more detailed investigations. </div><div>This study interpreted between the ground surface and 500&nbsp;m depth along almost 30,000 line kilometres of nominally 20&nbsp;km line-spaced AEM conductivity sections, across an area of approximately 550,000&nbsp;km2. These interpretations delineate the geo-electrical features that correspond to major chronostratigraphic boundaries, and capture detailed stratigraphic information associated with these boundaries. These interpretations produced approximately 170,000 depth estimate points or approximately 9,100 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for compliance with Geoscience Australia’s (GA) Estimates of Geological and Geophysical Surfaces (EGGS) database, the national repository for standardised depth estimate points. </div><div>Results from these interpretations provided support to stratigraphic drillhole targeting, as part of the Delamerian Margins NSW National Drilling Initiative campaign, a collaboration between GA’s EFTF program, the MinEx CRC National Drilling Initiative and the Geological Survey of New South Wales. The interpretations have applications in a wide range of disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. It is anticipated that these interpretations will benefit government, industry and academia with interest in the geology of the ERC region.</div>

This Officer Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Officer Basin is one of Australia's largest intra-cratonic sedimentary basins, spanning approximately 525,000 square kilometres. It contains a thick sedimentary sequence, ranging up to 10,000 m in depth, composed of rocks from the Neoproterozoic to Late Devonian periods. The basin features diverse depositional environments, including marine and non-marine siliclastic and carbonate units, evaporites, and minor volcanic deposits. The Neoproterozoic succession exhibits a range of depositional settings, including pro-delta to shelf, fluvial to shallow marine, lagoonal, glacial, and aeolian systems. The Cambrian to Ordovician sequence reveals evidence of fluvial, shallow marine, aeolian, sabkha to playa, and lacustrine settings. Volcanic rocks occur sporadically within the sequence, like the Cambrian Table Hill Volcanics in WA and the Neoproterozoic Cadlareena Volcanics in SA. The Officer Basin is considered a remnant of the larger Centralian Superbasin that formed during the Neoproterozoic, covering a vast region in central Australia. The Centralian Superbasin formed as a sag basin during the Tonian, accumulating fluvial, marine, and evaporitic sediments, followed by Neoproterozoic glacial deposits. The long-lasting Petermann Orogeny affected the earlier depositional systems, with extensive uplift along the northern margin of the basin leading to deposition of widespread fluvial and marine siliciclastic and carbonate sediments spanning the terminal Proterozoic to Late Cambrian. The Delamerian Orogeny renewed deposition and reactivated existing structures, and promoted extensive basaltic volcanism in the central and western regions of the basin. Later events are a poorly understood stage, though probably involved continued deposition until the Alice Springs Orogeny uplifted the region, terminating sedimentation in the Late Ordovician or Silurian. A suspected Late Devonian extensional event provided space for fluvial siliciclastic sediment deposition in the north-east. Today, the Officer Basin features four distinct structural zones: a marginal overthrust zone along the northern margin, a zone with rupturing by salt diapirs across the main depositional centre, a central thrusted zone, and a broad gently dipping shelf zone that shallows to the south.

This Gippsland Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Gippsland Basin is an asymmetrical east-trending rift structure that originated during rifting in the Late Jurassic to Early Cretaceous, as Australia and Antarctica began to separate. Over time, it developed into a continental passive margin basin, with sedimentation continuing to the present day. The basin is characterized by four main phases of tectonic evolution, interspersed with eustatic sea-level variations: initial rifting and extension, mid-Cretaceous contraction, renewed extension, and cessation of rifting in the middle Eocene. The basin's geological structures consist of mainly east to north-east trending features, with the west dominated by north-east structures due to the influence of basement trends. Major fault systems are prominent, compartmentalizing the basin into platforms and depressions separated by bedrock highs. The basin's complex stratigraphic succession reveals fluvial, deltaic, marginal marine, and open marine depositional environments. The sedimentary sequence includes terrigenous siliciclastic sediments from the Upper Cretaceous to Eocene, followed by post-rift sands, clays, coals, and limestones/marls of Oligocene to Holocene age. The Gippsland Basin's sediments are subdivided into four main stratigraphic groups: the Strzelecki, Latrobe, Seaspray, and Sale groups. The Strzelecki Group, dating from the Late Jurassic to Early Cretaceous, consists of non-marine sedimentary rocks deposited in fluvial and lacustrine environments. The Latrobe Group, from Late Cretaceous to early Oligocene, contains siliciclastic sediments deposited in various non-marine to marginal marine settings, showing significant lateral lithofacies variations. The Seaspray Group, dating from Oligocene to Pliocene, formed during a post-rift phase, characterized by marine limestone and marl units and continental clastic sediments. Lastly, the Sale Group consists of Miocene-to-Recent continental clastic sediments forming a thin veneer over the onshore portion of the basin. The Gippsland Basin also contains several basaltic lava fields, with two notable volcanic units—the Thorpdale Volcanics and Carrajung Volcanics—part of the Older Volcanics in Victoria. Overall, the Gippsland Basin's geological history and diverse sedimentary deposits make it a significant area for various geological and geophysical studies, including its hydrocarbon resources concentrated in offshore Latrobe Group reservoirs.

This Arafura Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Arafura Basin is a large intracratonic sedimentary basin along the northern continental margin of Australia. Over 90% of the basin occurs offshore in relatively shallow marine waters of the Arafura Sea, with the basin extending northwards beyond Australia's territorial claim. The southern part of the basin is onshore in northern Arnhem Land. Older Paleo- to Mesoproterozoic rocks of the northern Macarthur Basin underlie most of the onshore basin, whereas Mesozoic and Cenozoic sediments of the Money Shoal Basin unconformably overlie the offshore basin. The sedimentary record of the Arafura Basin spans greater than 250 million years, from the late Neoproterozoic to the early Permian. However, subsidence was episodic and restricted to four main phases of regional subsidence interspersed with relatively long periods of tectonic quiescence. Consequently, the entire sedimentary succession of the basin is relatively structurally conformable. The oldest rocks are the Neoproterozoic to Cambrian Wessel Group. These are overlain by the Middle Cambrian to early Ordovician Goulburn Group, followed by the Late Devonian Arafura Group. The uppermost sequence is Late Carboniferous to early Permian (an equivalent of the Kulshill Group from the neighbouring Bonaparte Basin). The sedimentary rocks of the Arafura Basin are clastic-dominated and include sandstone, shale, limestone, dolostone and minor coal and glacial deposits. Most of the Arafura Basin formed within shallow marine environments, with evidence for fluvial conditions largely restricted to the Carboniferous to Permian rocks. There are no detailed basin-scale studies on the hydrogeology and groundwater systems of the Arafura Basin. Previous hydrogeological investigations by the Northern Territory Government during the 1980s and 1990s focused on groundwater supplies for remote communities such as Maningrida, Galiwinku and Millingimbi. Groundwater for these communities is sourced from fractured rock sandstone aquifers, most likely units of the Arafura Basin such as the Marchinbar Sandstone and Elcho Island Formation of the Wessel Group. The aquifers are fractured and extensively weathered up to 100 metres below surface.