We collected 38 groundwater and two surface water samples in the semi-arid Lake Woods region of the Northern Territory to better understand the hydrogeochemistry of this system, which straddles the Wiso, Tennant Creek and Georgina geological regions. Lake Woods is presently a losing waterbody feeding the underlying groundwater system. The main aquifers comprise mainly carbonate (limestone and dolostone), siliciclastic (sandstone and siltstone) and evaporitic units. The water composition was determined in terms of bulk properties (pH, electrical conductivity, temperature, dissolved oxygen, redox potential), 40 major, minor and trace elements as well as six isotopes (δ18Owater, δ2Hwater, δ13CDIC, δ34SSO4=, δ18OSO4=, 87Sr/86Sr). The groundwater is recharged through infiltration in the catchment from monsoonal rainfall (annual average rainfall ~600 mm) and runoff. It evolves geochemically mainly through evapotranspiration and water–mineral interaction (dissolution of carbonates, silicates, and to a lesser extent sulfates). The two surface waters (one from the main creek feeding the lake, the other from the lake itself) are extraordinarily enriched in 18O and 2H isotopes (δ18O of +10.9 and +16.4 ‰ VSMOW, and δ2H of +41 and +93 ‰ VSMOW, respectively), which is interpreted to reflect evaporation during the dry season (annual average evaporation ~3000 mm) under low humidity conditions (annual average relative humidity ~40 %). This interpretation is supported by modelling results. The potassium (K) relative enrichment (K/Cl mass ratio over 50 times that of sea water) is similar to that observed in salt-lake systems worldwide that are prospective for potash resources. Potassium enrichment is believed to derive partly from dust during atmospheric transport/deposition, but mostly from weathering of K-silicates in the aquifer materials (and possibly underlying formations). Further studies of Australian salt-lake systems are required to reach evidence-based conclusions on their mineral potential for potash, lithium, boron and other low-temperature mineral system commodities such as uranium. <b>Citation:</b> P. de Caritat, E. N. Bastrakov, S. Jaireth, P. M. English, J. D. A. Clarke, T. P. Mernagh, A. S. Wygralak, H. E. Dulfer & J. Trafford (2019) Groundwater geochemistry, hydrogeology and potash mineral potential of the Lake Woods region, Northern Territory, Australia, <i>Australian Journal of Earth Sciences</i>, 66:3, 411-430, DOI: 10.1080/08120099.2018.1543208

Geochemical surveys deliver fundamental data, information and knowledge about the concentration and spatial distribution of chemical elements, isotopes and compounds in the natural environment. Typically near-surface sampling media, such as soil, sediment, outcropping rocks and stream or groundwater, are used. The application of such datasets to fields such as mineral exploration, environmental management, and geomedicine has been widely documented. In this presentation I reflect on a sabbatical experience with the Australian Federal Police (AFP) in 2017-2018 that allowed me to extend the interpretation of geochemical survey data beyond these established applications. In particular, with my collaborators we explore ways in which geochemical survey data and maps can be used to indicate the provenance of an evidentiary sample collected at a crime scene or obtained for instance from items belonging to a suspect intercepted at border entry. Because soils are extremely diverse mineralogically, geochemically and biologically, it should theoretically be possible to exclude very large swathes of territory (>90%) from further provenancing investigation using soil data. In a collaboration between Geoscience Australia (GA), the AFP and the University of Canberra (UC), a recent geochemical survey of the urban/suburban Canberra region in southeastern Australia is being used as a testbed for developing different approaches to forensic applications of geochemical surveys. A predictive soil provenancing method at the national scale was also developed and tested for application where no actual detailed, fit-for-purpose geochemical survey data exist. Over the next few years, GA, AFP and UC are collaborating with Flinders University to add biome data from soil and soil-derived dust to further improve the provenancing technique. This Abstract was presented at the 2021 Goldschmidt Conference (https://conf.goldschmidt.info/goldschmidt/2021/meetingapp.cgi)

The potential for hydrogen production in the Galilee Basin region is assessed to provide a joint information base for hydrogen generation potential from renewable energy, groundwater and natural gas coupled with carbon capture and storage (CCS). Hydrogen generation requires water, whether using electrolysis with renewable energy or steam methane reforming (SMR) of gas with CCS. The data package includes the regional renewable energy capacity factor, aquifers and their properties (potential yield, salinity, and reserves or storativity), natural gas resources, and geological storage potential of carbon dioxide (CO2). This data guide gives examples of how the compiled data can be used. The renewable hydrogen potential is assessed based on renewable energy capacity factor and groundwater information (potential yield, salinity, and reserves or storativity). Nine aquifers from the Galilee and overlying Eromanga and the Lake Eyre basins are included in the assessment. The Galilee Basin region has low renewable hydrogen potential except for small areas in the north, south and south-west. Although the renewable energy capacity factor in the basin is high, aquifers tend to have poor groundwater reserves or storativity, which results in lower overall renewable hydrogen potential. The Galilee Basin contains modest contingent gas resources, while sizeable gas reserves and contingent resources were identified in the overlying Eromanga Basin (Geoscience Australia, 2022). The geological CO2 storage assessment suggests that the Betts Creek - Rewan Play interval is the most prospective for CCS, with the highest potential around the central basin region. Further work on identifying detailed gas potential is needed to assess hydrogen generation potential from gas.

The Historical Bushfire Boundaries service represents the aggregation of jurisdictional supplied burnt areas polygons stemming from the early 1900's through to 2022 (excluding the Northern Territory). The burnt area data represents curated jurisdictional owned polygons of both bushfires and prescribed (planned) burns. To ensure the dataset adhered to the nationally approved and agreed data dictionary for fire history Geoscience Australia had to modify some of the attributes presented. The information provided within this service is reflective only of data supplied by participating authoritative agencies and may or may not represent all fire history within a state.

Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight-year, $225m investment by the Australian Government. The Darling-Curnamona-Delamerian (DCD) 2D reflection seismic survey was acquired during May to August 2022 in the Delamerian Orogen, the Murray-Darling basin, the Curnamona Province, and the upper Darling River floodplain regions in South Australia, Victoria and New South Wales. This project is a collaboration between Geoscience Australia (GA), the Geological Survey of South Australia (GSSA), the Geological Survey of Victoria (GSV) and the Geological Survey of New South Wales (GSNSW) and was funded by the Australian Government’s Exploring for the Future (EFTF) program. The overall objective of the EFTF Darling-Curnamona-Delamerian project is to improve the understanding of mineral and groundwater resources of the Curnamona Province and Delamerian Orogen and overlying basin systems through acquisition and interpretation of new pre-competitive geoscience data sets. The total length of acquisition was 1256 km distributed over five deep crustal 2D reflection seismic lines 22GA-DL1 (446 km), 22GA-DL2 (249 km), 22GA-CD1 (287 km), 22GA-CD2 (178 km), 22GA-CD3 (39.5 km) to image deep crustal structures, and a high-resolution 2D reflection seismic line 22GA-UDF (56 km) to explore groundwater resources. The DL lines provide coverage of fundamental geophysical data over the Flinders Range, the Delamerian Province and the Murray-Darling basin region in eastern South Australia and Victoria. The CD lines extend through the Curnamona Province and into the Darling Basin. The UDF line will assist with refining the hydrogeological model, understanding groundwater dynamics, and locating areas better suited to groundwater bores for better quality groundwater in the upper Darling River floodplain area. The data processing was performed by a contractor under the supervision of Geoscience Australia. The five deep crustal lines (22GA-DL1,DL2,CD1,CD2,CD3) were processed with record lengths of 20 and 8 seconds, while the shallow high-resolution line (22GA-UDF) was processed at a 4 second length. This processing yielded DMO Stack, Post-Stack Time Migration, and Pre-Stack Time Migration products. <strong>Raw shot gathers and processed gathers for this survey are available on request from clientservices@ga.gov.au - Quote eCat# 147423</strong>

The Cenozoic alkaline and related igneous rocks of Australia web map service depicts the spatial representation of the alkaline and related rocks of Cenozoic age.

The Mineral Potential web service provides access to digital datasets used in the assessment of mineral potential in Australia. The service includes maps showing the potential for sediment-hosted base metal mineral systems in Australia.

Publicly available groundwater data have been compiled to provide a common information base to inform environmental, resource development and regulatory decisions in the Galilee Basin region. This data guide gives examples of how these data can be used. The data package included with this data guide captures existing knowledge of Lake Eyre Basin aquifers in the Galilee Basin region and their properties, including salinity, water levels, resource size, potential aquifer yield and indicators of surface water interactions. The methods used to derive these data for the Lake Eyre Basin aquifer in the Galilee Basin region are outlined in the associated metadata files. These are described in groundwater conceptualisation models (Hostetler et al., 2023). The Lake Eyre Basin overlying the Galilee Basin includes one broadly defined aquifer that includes multiple aquifer systems that are defined as Cenozoic aquifers. Compiled data was assigned to this interval and were used to characterise groundwater systems at the basin scale. The data are compiled for a point-in-time to inform decisions on resource development activities Basin. The available historical groundwater data can be used to assess the potential effects on groundwater for different development scenarios. The data can also be used for other purposes, such as exploring unallocated groundwater resource potential. Data to January 2022 are used for this compilation.

This record presents new Sensitive High Resolution Ion MicroProbe (SHRIMP) U– Pb zircon results for eighteen samples from the Cairns, Cape York and Georgetown regions in Queensland. Samples from the Cairns region comprise one granite and one microgranite. Eight samples from the Cape York region and three from the Georgetown region comprise Paleozoic igneous rocks, all but one of which are part of the Carboniferous to Permian Kennedy Igneous Association. Of particular interest are the results for two rhyolitic intrusions from the Coen Inlier that are host to gold mineralisation and gave ages of approximately 280 Ma. These results are supported by similar ages reported by Kositcin et al. (2016), also from felsic dykes spatially associated with gold mineralisation. Together, they suggest a widespread, early-Permian gold (Kungurian) event in this region. The results for two felsic dykes spatially associated with gold mineralisation much farther to the south in the Georgetown region, also gave similar early-Permian ages. The geochronology of five metamorphic rocks from the Cape York region, which were analysed in support of the Coen–Cape Weymouth geology mapping project has resulted in all samples being reassigned to other formations. The work contained in this report was carried out under the auspices of the National Collaborative Framework (NCF) between Geoscience Australia and the Geological Survey of Queensland. The data and age interpretations are also available in Geoscience Australia’s Geochronology Delivery database (http://www.ga.gov.au/geochron-sapub-web/). <b>Bibliographic Reference: </b>CROSS, A.J., DHNARAM, C., BULTITUDE, R.J., BROWN, D.D., PURDY, D.J. & VON GNIELINSKI, F.E., 2019. Summary of results. Joint GSQ–GA geochronology project: Cairns, Cape York and Georgetown regions, 2015–2016. <i>Queensland Geological Record</i> <b>2019/01</b>.