<div>The Abbot Point to Hydrographers Passage bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the RV Escape during the period 6 Oct 2020 – 16 Mar 2021. This was a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Point through Hydrographers Passage QLD. Bathymetry data was acquired using a Kongsberg EM 2040, and processed using QPS QINSy. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

The Northern Approaches to Broome multibeam survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Bhagwan K during the period 05 August– 02 October 2020. This was a contracted survey conducted by EGS as part of the Hydroscheme Industry Partnership Program. The survey area encompasses the northern approaches to Broome, WA located between the Talboys Rock and Gantheaume Point, Western Australia. Bathymetry data was acquired using a Kongsberg EM2040D 200-400 kHz and processed using QPS QINSy 9.2.3 processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area. <BR>This dataset is not to be used for navigational purposes.

<p>This resource contains multibeam backscatter data for Bynoe Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Northern Territory Government (Department of Environment and Natural Resources) during the period between 3 and 27 May 2016 on the RV Solander (survey SOL6187/GA0351). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Environment and Natural Resources, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. <p>The specific objectives of the survey were to: <p>1. Obtain high resolution geophysical (bathymetry) data for Bynoe Harbour; <p>2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for Bynoe Harbour; and <p>3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles. <p>This dataset comprises multibeam backscatter data. A detailed account of the survey is provided in: Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T. 2016. Bynoe Harbour Marine Survey 2016: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.004.

The Australian Bathymetry and Topography (AusBathyTopo) Torres Strait dataset contains depth and elevation data compiled from all available data within the Torres Strait into a 30 m-resolution Digital Elevation Model (DEM). The Torres Strait lies at the northern end of the Great Barrier Reef (GBR), the largest coral reef ecosystem on Earth, and straddles the Arafura Sea to the west and the Coral Sea to the east. The Torres Strait area is bounded by Australia, Indonesia and Papua New Guinea. Bathymetry mapping of this extensive reef and shoal system is vital for the protection of the Torres Strait allowing for the safe navigation of shipping and improved environmental management. Over past ten years, deep-water multibeam surveys have revealed the highly complex continental slope canyons in deeper Coral Sea waters. Shallow-water multibeam surveys conducted by the US-funded Source-to-Sink program revealed the extensive Fly River delta deposits. Airborne LiDAR bathymetry acquired by the Australian Hydrographic Office cover most of the Torres Strait and GBR reefs, with coverage gaps supplemented by satellite derived bathymetry. The Geoscience Australia-developed National Intertidal DIgital Elevation Model (NIDEM) improves the source data gap along Australia’s vast intertidal zone. We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353 ) in undertaking this research.” The datasets used were collected by the Marine National Facility on 13 voyages (see Lineage for identification). All source bathymetry data were extensively edited as point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum. The 30 m-resolution grid is a fundamental dataset to underpin marine habitat mapping, and can be used to accurately simulate water mixing within a whole-of-GBR scale hydrodynamic model. This dataset is not to be used for navigational purposes.

The Great North Channel Torres Strait Multibeam survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Offshore Guardian and MV Special Order during the period 04 February– 14 April 2021. This was a contracted survey conducted by Guardian Geomatics as part of the Hydroscheme Industry Partnership Program. The survey area encompasses the Great North East Channel of the Torres Strait located between the Stephens Island, Pearce Cay and Rennel Island, Queensland. Bathymetry data was acquired using a Kongsberg EM2040-07 and Norbit iWBMSh Stx 200-400 kHz and processed using CARIS HIPS & SIPS 11.3 processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area. <BR>This dataset is not to be used for navigational purposes.

<div>The Norfolk Island Nearshore and Coastal Habitat Mapping was acquired by Ocean Infinity Pty Ltd onboard the M/V Offshore Solution from the 21st to the 24th July 2021, using a Kongsberg EM2040 Mark II. This survey was part of the Norfolk Island Nearshore and Coastal Habitat Mapping project in partnership with Deakin University’s Marine Mapping Group, University of Wollongong, Tellus4D Geoimaging, University of Newcastle, University of New South Wales, University of Tasmania and Geoscience Australia to obtain high resolution bathymetric grid (1m) and to define the morpho-bathymetry of the survey area based on the bathymetric grid and derived products such as slope aspect map, ruggedness map, bathymetry position index and backscatter map. This dataset contains a 1m-resolution 32-bit floating point GeoTIFF file of the bathymetry in the study area, derived from the processed EM2040 Mark II bathymetry data, using Qimera and CARIS HIPS and SIPS software. A detailed report on the survey is provided in: Ocean Infinity Pty Ltd. 2022. Report of Survey: Norfolk Island Nearshore and Coastal Habitat Mapping. Ocean Infinity Group Limited. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.</div>

<div>The Banks Strait to Cape Barren bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Offshore Solution during the period 29 November 2021 – 19 April 2022. This was a contracted survey conducted for the Australian Hydrographic Office by Ocean Infinity Australia as part of the Hydroscheme Industry Partnership Program. The survey area encompases an area within Banks Strait to Cape Barren, Tasmania. Bathymetry data was acquired using a Kongsberg EM2040 MKII and a Kongsberg EM2040P, and processed using QPS Qimera processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

<div>The Western Approaches to Torres Strait Bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Pacific Conquest, an unmanned vehicle USV and VH-VEH Cessna 441 aircraft during the period 29 October 2020 – 21 February 2021.&nbsp;</div><div>This is a contracted survey conducted for the Australian Hydrographic Office by Fugro Australia Marine as part of the Hydroscheme Industry Partnership Program (HIPP). </div><div>The survey area is east of the Western approaches to the Torres Strait. </div><div>Bathymetry data was acquired using a Kongsberg EM2040 (Dual/Single Head and Dual swath), EM2040P and LADS HD+ and RIEGL VQ-820-G systems and processed using CARIS HIPS & SIPS 11.3.17, LADS HD+ GS, RiWorld processing software. </div><div>The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

<div>The Cape Barren to Babel Island bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Ocean Dynasty and MV Pacific Crest during the period 28 February – 06 May 2021. This was a contracted survey conducted by MMA Offshore as part of the Hydroscheme Industry Partnership Program. The survey area encompasses the Cape Barren to Babel Island, Tasmania. Bathymetry data was acquired using a Kongsberg EM2040P and processed using CARIS HIPS & SIPS processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

<div>The Flinders Island bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Offshore Surveyor during the period 16 December – 13 May 2022. This was a contracted survey conducted for the Australian Hydrographic Office by Guaridan Geomatis Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases an area North East of Flinders Island, Tasmania. Bathymetry data was acquired using a Kongsberg EM2040-07 MKII and processed using CARIS HIPS & SIPS processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>