The Australian Bathymetry and Topography (AusBathyTopo) Torres Strait dataset contains depth and elevation data compiled from all available data within the Torres Strait into a 30 m-resolution Digital Elevation Model (DEM). The Torres Strait lies at the northern end of the Great Barrier Reef (GBR), the largest coral reef ecosystem on Earth, and straddles the Arafura Sea to the west and the Coral Sea to the east. The Torres Strait area is bounded by Australia, Indonesia and Papua New Guinea. Bathymetry mapping of this extensive reef and shoal system is vital for the protection of the Torres Strait allowing for the safe navigation of shipping and improved environmental management. Over past ten years, deep-water multibeam surveys have revealed the highly complex continental slope canyons in deeper Coral Sea waters. Shallow-water multibeam surveys conducted by the US-funded Source-to-Sink program revealed the extensive Fly River delta deposits. Airborne LiDAR bathymetry acquired by the Australian Hydrographic Office cover most of the Torres Strait and GBR reefs, with coverage gaps supplemented by satellite derived bathymetry. The Geoscience Australia-developed National Intertidal DIgital Elevation Model (NIDEM) improves the source data gap along Australia’s vast intertidal zone. We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353 ) in undertaking this research.” The datasets used were collected by the Marine National Facility on 13 voyages (see Lineage for identification). All source bathymetry data were extensively edited as point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum. The 30 m-resolution grid is a fundamental dataset to underpin marine habitat mapping, and can be used to accurately simulate water mixing within a whole-of-GBR scale hydrodynamic model. This dataset is not to be used for navigational purposes.

This dataset contains bathymetry (depth) products from the compilation of all available source bathymetry data within the Great Barrier Reef into a 30 m-resolution Digital Elevation Model (DEM). The Great Barrier Reef (GBR) is the largest coral reef ecosystem on Earth and stretches over 2500 km along the north-eastern Australia margin. Bathymetry mapping of this extensive reef system is vital for the protection of the GBR allowing for the safe navigation of shipping and improved environmental management. Over the past ten years, deep-water multibeam surveys have revealed the highly complex shelf-edge drowned reefs and continental slope canyons. Airborne LiDAR bathymetry acquired by the Australian Hydrographic Service cover most of the GBR reefs, with coverage gaps supplemented by satellite derived bathymetry. The Geoscience Australia-developed Intertidal Elevation Model DEM improves the source data gap along Australia’s vast intertidal zone. All source bathymetry data were extensively edited as point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum. The High-resolution depth model for the Great Barrier Reef - 30 m (Version 10 Nov 2020) can be downloaded as four separate but overlapping grids, with the area coverage: Great Barrier Reef A 2020 30m 10-17°S 143-147°E Great Barrier Reef B 2020 30m 16-23°S 144-149°E Great Barrier Reef C 2020 30m 18-24°S 148-154°E Great Barrier Reef D 2020 30m 23-29°S 150-156°E There is an updated “Torres Strait Bathymetry 30m 2020 - A High-resolution Depth Model (20200021C)” and can be downloaded at: <a href="http://pid.geoscience.gov.au/dataset/ga/144348">http://pid.geoscience.gov.au/dataset/ga/144348</a> It includes a grid with an area coverage: 8 – 13°S and 139 – 146°E This dataset is not to be used for navigational purposes.

This dataset contains bathymetry (depth) products from the compilation of all available source bathymetry data within Northern Australia into a 30 m-resolution Digital Elevation Model (DEM). The Northern Australia region includes a broad continental shelf over 400 km wide extending out from Western Australia and the Northern Territory, and stretching over a distance of ~1500 km. This region encompasses numerous shallow coral reefs including the offshore Sahul Banks, sand cays, drowned ancient river valleys, broad inner-shelf banks and a rugged coastline. Bathymetry mapping of the seafloor is vital for the protection of Northern Australia, allowing for the safe navigation of shipping and improved environmental management. Shallow- and deep-water multibeam surveys have revealed the highly complex seafloor of the continental shelf and adjacent slope canyons draining into the Indian Ocean and Timor Sea. Airborne LiDAR bathymetry acquired by the Australian Hydrographic Office cover most of the Sahul Banks reefs, with some coverage gaps supplemented by satellite derived bathymetry. The Geoscience Australia-developed Intertidal Elevation Model DEM improves the source data gap along Northern Australia’s vast intertidal zone. All source bathymetry data were extensively edited as point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum.

This dataset contains bathymetry products from the compilation of all available source bathymetry data within the Great Barrier Reef into a 100 m-resolution Digital Elevation Model (DEM). The Great Barrier Reef (GBR) and Coral Sea is the largest coral reef ecosystem on Earth and stretches over 2500 km along the north-eastern Australia margin. Bathymetry mapping of this extensive reef system is vital for the protection of the GBR allowing for the safe navigation of shipping and improved environmental management. Over past ten years, deep-water multibeam surveys have revealed the highly complex shelf-edge drowned reefs and continental slope canyons. Airborne LiDAR bathymetry acquired by the Australian Hydrographic Office cover most of the GBR reefs, with coverage gaps supplemented by satellite derived bathymetry. The Geoscience Australia-developed Intertidal Elevation Model DEM improves the source data gap along Australia’s vast intertidal zone. All source bathymetry data were extensively edited as point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum.<p><p>This dataset is not to be used for navigational purposes.