<div>This record links to tarred folders with simulation files used for a study on tsunami hazards in Tongatapu (eCat 146012) - DOI: https://doi.org/10.1093/gji/ggac140. </div><div><br></div><div>Access to this data will only be available by request via datacatalogue@ga.gov.au</div><div><br></div><div>The files were created using code here: </div><div>https://github.com/GeoscienceAustralia/ptha/tree/master/misc/monte_carlo_paper_2021. </div><div><br></div><div>This code should be read to understand the structure and contents of the tar archives. The simulation files are large and for most use cases you won't need them. First check if your needs a met via code and documentation at the link above. If the git repository doesn't include links to what you need, then it may be available in these tar archives. Contents include the datasets used to setup the model and the model outputs for every scenario. While the modelling files and code were developed by GA, at the time of writing, we do not have permission to distribute some of the input datasets outside of GA (including the Tongatapu LIDAR). </div><div><br></div><div>Access to this data will only be available by request via datacatalogue@ga.gov.au</div>

<div>The Australian Bureau of Meteorology (BoM), Geoscience Australia (GA) and the Pacific Community (SPC) work together on the Australian Aid funded Pacific Sea Level and Geodetic Monitoring Project (PSLGMP). The project is focused on determining the long-term variation in sea level through observation and analysis of changes in the height of the land (using Global Navigation Satellite System (GNSS) data) and changes in the sea level (using tide gauges managed and operated by the BoM. It is the role of GA and SPC to provide information about ‘absolute’ movement of the tide gauge (managed by BoM) using GNSS to continuously monitor land motion and using levelling (SPC) to measure the height difference between the tide gauge and GNSS pillar every 18 months. </div><div>Land movement caused by earthquakes, subsidence and surface uplift have an important effect on sea level observations at tide gauges. For example, a tide gauge connected to a pier which is subsiding at a rate of 5 mm per year would be observed as a rate of 5 mm per year of sea level rise at the tide gauge. Because of this, it is important to measure, and account for, the movement of land when measuring ‘absolute’ sea level variation - the change in the sea level relative to the centre of the Earth. Relative sea level variation on the other hand is measured relative to local buildings and landmass around the coastline.</div><div>Geoscience Australia’s work enables more accurate 'absolute' sea level estimates by providing observations of land motion which can be accounted for by BoM when analysing the tide gauge data.</div><div><br></div>

<div>Mineral prospectivity studies seek to map evidence of mineral system activity, with the aim of informing mineral exploration decisions and guiding exploration in the face of uncertainty. These studies leverage the growing volumes of information that are available to characterise the lithosphere by compiling covariate (or feature) grids that represent key mineral system ingredients. Previous studies have been categorised as either “knowledge-driven” or “data-driven” approaches depending on whether these grids are integrated via expert elicitation or by the empirical relationship to known mineralisation, respectively. However, to our knowledge, the underlying modelling framework and assumptions have not been systematically reviewed to understand how choices in the approach to the problem influence modelling outcomes. Here we show the broad mathematical equivalence in these approaches and highlight the limitations inherent when optimising to minimise misfit in potentially under-determined problems. We argue that advances in mineral prospectivity are more likely to be driven by careful consideration of the model selection problem. Focusing effort on model selection will not only drive more robust mineral prospectivity predictions but may also simultaneously refine our understanding of key mineral system processes. To build on these results, we present the Mineral Potential Toolkit; a software repository to facilitate feature engineering, statistical appraisal, and quantitative prospectivity modelling. The toolkit enables a novel approach that combines the best aspects of previous methods. Abstract presented to the 26th World Mining Congress 2023 (https://wmc2023.org/)

<div>This data package contains interpretations of airborne electromagnetic (AEM) conductivity sections in the Exploring for the Future (EFTF) program’s Eastern Resources Corridor (ERC) study area, in south eastern Australia. Conductivity sections from 3 AEM surveys were interpreted to provide a continuous interpretation across the study area – the EFTF AusAEM ERC (Ley-Cooper, 2021), the Frome Embayment TEMPEST (Costelloe et al., 2012) and the MinEx CRC Mundi (Brodie, 2021) AEM surveys. Selected lines from the Frome Embayment TEMPEST and MinEx CRC Mundi surveys were chosen for interpretation to align with the 20&nbsp;km line-spaced EFTF AusAEM ERC survey (Figure 1).</div><div>The aim of this study was to interpret the AEM conductivity sections to develop a regional understanding of the near-surface stratigraphy and structural architecture. To ensure that the interpretations took into account the local geological features, the AEM conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This approach provides a near-surface fundamental regional geological framework to support more detailed investigations. </div><div>This study interpreted between the ground surface and 500&nbsp;m depth along almost 30,000 line kilometres of nominally 20&nbsp;km line-spaced AEM conductivity sections, across an area of approximately 550,000&nbsp;km2. These interpretations delineate the geo-electrical features that correspond to major chronostratigraphic boundaries, and capture detailed stratigraphic information associated with these boundaries. These interpretations produced approximately 170,000 depth estimate points or approximately 9,100 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for compliance with Geoscience Australia’s (GA) Estimates of Geological and Geophysical Surfaces (EGGS) database, the national repository for standardised depth estimate points. </div><div>Results from these interpretations provided support to stratigraphic drillhole targeting, as part of the Delamerian Margins NSW National Drilling Initiative campaign, a collaboration between GA’s EFTF program, the MinEx CRC National Drilling Initiative and the Geological Survey of New South Wales. The interpretations have applications in a wide range of disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. It is anticipated that these interpretations will benefit government, industry and academia with interest in the geology of the ERC region.</div>

<div>The annual Asia Pacific Regional Geodetic Project (APRGP) GPS campaign is an activity of the Geodetic Reference Frame Working Group (WG) of the Regional Committee of United Nations Global Geospatial Information Management for Asia and the Pacific (UN-GGIM-AP). This document describes the data analysis of the APRGP GPS campaign undertaken between the 10th and 17nd of September 2023. Campaign GPS data collected at 124 sites in nine countries across the Asia Pacific region were processed using version 5.2 of the Bernese GNSS Software in a regional network together with selected IGS (International GNSS Service) sites. The GPS solution was constrained to the ITRF2020 reference frame by adopting IGS20 coordinates on selected IGS core reference sites and using the final IGS earth orientation parameters and satellite ephemerides products. The average of the root mean square repeatability of the station coordinates for the campaign was 2.5 mm, 2.5 mm and 6.9 &nbsp;mm in north, east and up components of station position respectively.</div><div><br></div>

<div>The annual Asia Pacific Regional Geodetic Project (APRGP) GPS campaign is an activity of the Geodetic Reference Frame Working Group (WG) of the Regional Committee of United Nations Global Geospatial Information Management for Asia and the Pacific (UN-GGIM-AP). This document describes the data analysis of the APRGP GPS campaign undertaken between the 11th and 17nd of September 2022. Campaign GPS data collected at 116 sites in seven countries across the Asia Pacific region were processed using version 5.2 of the Bernese GNSS Software in a regional network together with selected IGS (International GNSS Service) sites. The GPS solution was constrained to the ITRF2014 reference frame by adopting IGS14 coordinates on selected IGS reference sites and using the final IGS earth orientation parameters and satellite ephemerides products. The average of the root mean square repeatability of the station coordinates for the campaign was 2.0 mm, 2.4 mm and 7.5 mm in north, east and up components of station position respectively.</div>

<div>A document outlining how geoscientific data can be useful for farmers and engagement tool for geoscientists interacting with farmers and pastoralists.</div>

<div>The integrity and strength of multi-technique terrestrial reference frames, such as realisations of the International Terrestrial Reference Frame (ITRF), depend on the precisely measured and expressed local-tie connections between space geodetic observing systems at co-located observatories. Australia has several observatories which together host the full variety of space geodetic observation techniques, including Global Navigation Satellites Systems (GNSS), Very Long Baseline Interferometry (VLBI), Satellite Laser Ranging (SLR) and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) beacons.</div><div><br></div><div>This report documents the technical aspects of the local tie survey completed at the Mount Stromlo observatory, in Canberra in 2014. The aim of the survey was to precisely measure the local terrestrial connections between the space-based geodetic observing systems co-located at the observatory, which include 3 International GNSS Service (IGS) stations, SLR and DORIS infrastructure. In particular, this report documents the indirect measurement of the SLR invariant reference point. Geoscience Australia has routinely performed classical terrestrial surveys at Mount Stromlo, including surveys in 1999, 2002 and 2003 (post-fire). A high precision survey was conducted between the survey pillars surrounding the SLR observatory. These survey pillars were monitored to ensure their stability as part of a consistent, stable terrestrial network from which local tie connections were made to the SLR and other observing systems. The relationship between points of interest included the millimetre level accurate connections and their associated variance covariance matrix.</div><div><br></div>

<div>The lithology, geochemistry, and architecture of the continental lithospheric mantle (CLM) underlying the Kimberley Craton of north-western Australia has been constrained using pressure-temperature estimates and mineral compositions for &gt;5,000 newly analyzed and published garnet and chrome (Cr) diopside mantle xenocrysts from 25 kimberlites and lamproites of Mesoproterozoic to Miocene age. Single-grain Cr diopside paleogeotherms define lithospheric thicknesses of 200–250 km and fall along conductive geotherms corresponding to a surface heat flow of 37–40 mW/m 2. Similar geotherms derived from Miocene and Mesoproterozoic intrusions indicate that the lithospheric architecture and thermal state of the CLM has remained stable since at least 1,000 Ma. The chemistry of xenocrysts defines a layered lithosphere with lithological and geochemical domains in the shallow (&lt;100 km) and deep (&gt;150 km) CLM, separated by a diopside-depleted and seismically slow mid-lithosphere discontinuity (100–150 km). The shallow CLM is comprised of Cr diopsides derived from depleted garnet-poor and spinel-bearing lherzolite that has been weakly metasomatized. This layer may represent an early (Meso to Neoarchean?) nucleus of the craton. The deep CLM is comprised of high Cr2O3 garnet lherzolite with lesser harzburgite, and eclogite. The peridotite components are inferred to have formed as residues of polybaric partial mantle melting in the Archean, whereas eclogite likely represents former oceanic crust accreted during Paleoproterozoic subduction. This deep CLM was metasomatized by H2O-rich melts derived from subducted sediments and high-temperature FeO-TiO2 melts from the asthenosphere.</div><div><br></div><div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div><strong>Citation:</strong></div><div>Sudholz, Z.J., et al. (2023) Mapping the Structure and Metasomatic Enrichment of the Lithospheric Mantle Beneath the Kimberley Craton, Western Australia,&nbsp;<em><i>Geochemistry, Geophysics, Geosystems</i>,</em>&nbsp;24, e2023GC011040.</div><div>https://doi.org/10.1029/2023GC011040</div>

<div>Diamond exploration over the past decade has led to the discovery of a new province of kimberlitic pipes (the Webb Province) in the Gibson Desert of central Australia. The Webb pipes comprise sparse macrocrystic olivine set in a groundmass of olivine, phlogopite, perovskite, spinel, clinopyroxene, titanian-andradite and carbonate. The pipes resemble ultramafic lamprophyres (notably aillikites) in their mineralogy, major and minor oxide chemistry, and initial 87Sr/ 86Sr and <em>ε</em>Nd-<em>ε</em>Hf isotopic compositions. Ion probe U-Pb geochronology on perovskite (806 ± 22 Ma) indicates the eruption of the pipes was co-eval with plume-related magmatism within central Australia (Willouran-Gairdner Volcanic Event) associated with the opening of the Centralian Superbasin and Rodinia supercontinent break-up. The equilibration pressure and temperature of mantle-derived garnet and chromian (Cr) diopside xenocrysts range between 17 and 40 kbar and 750–1320°C and define a paleo-lithospheric thickness of 140 ± 10 km. Chemical variations of xenocrysts define litho-chemical horizons within the shallow, middle, and deep sub-continental lithospheric mantle (SCLM). The shallow SCLM (50–70 km), which includes garnet-spinel and spinel lherzolite, contains Cr diopside with weakly refertilized rare earth element compositions and unenriched compositions. The mid-lithosphere (70–85 km) has lower modal abundances of Cr diopside. This layer corresponds to a seismic mid-lithosphere discontinuity interpreted as pargasite-bearing lherzolite. The deep SCLM (&gt;90 km) comprises refertilized garnet lherzolite that was metasomatized by a silicate-carbonatite melt.</div><div><br></div><div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div><strong>Citation:</strong></div><div>Sudholz, Z. J., et al. (2023). Petrology, age, and rift origin of ultramafic lamprophyres (aillikites) at Mount Webb, a new alkaline province in Central Australia. <i>Geochemistry, Geophysics, Geosystems</i>, 24, e2023GC011120.</div><div>https://doi.org/10.1029/2023GC011120</div>