Broken Hill Managed Aquifer recharge Projects 3D models and Fly-through

The 'River Murray Corridor (RMC) Salinity Mapping Project', provides important new information in relation to salinity hazard and management along in a 20 km-wide swath along a 450 km reach of the River Murray. The project area contains iconic wetlands, national and state forest parks, irrigation and dryland farming assets and the Murray River, significant areas of which are at risk from increasing salinisation of the River, the floodplain, and underlying groundwater resources. The project utilised a hydrogeological systems approach to integrate and analyse data obtained from a large regional airborne electromagnetic (AEM) survey (24,000 line km @ 150m line-spacing in a 20 km-wide swath along the Murray River), field mapping, and lithological and hydrogeochemical data obtained from drilling. New holistic inversions of the AEM data have been used to map key elements of the hydrogeological system and salinity extent in the shallow sub-surface (top 20-50 m). The Murray River is known to display great complexity in surface-groundwater interactions along its course. Electrical geophysical methods (such as AEM) are able to map surface-groundwater interaction due to the contrast between (electrically resistive) fresh water in the river, and (electrically conductive) brackish to saline groundwater in adjacent sediments. The location of significant river flush zones is influenced both by underlying geology and the location of locks, weirs and irrigation districts. The study has also identified significant areas of high salinity hazard in the floodplain and river, and quantified the salt store and salt load across the floodplain. The study has also identified sub-surface factors (including saline groundwater, shrinking flush zones, declining water tables) linked to vegetation health declines.

Under the Community Stream Sampling and Salinity Mapping Project, the Australian Government through the Department of Agriculture, Fisheries and Forestry and the Department of Environment and Heritage, acting through Bureau of Rural Sciences, funded an airborne electromagnetic (AEM) survey to provide information in relation to land use questions in selected areas along the River Murray Corridor (RMC). The proposed study areas and major land use issues were identified by the RMC Reference Group at its inception meeting on 26th July, 2006. This report has been prepared to facilitate recommendations on the Lindsay-Wallpolla study area. The work was developed in consultation with the RMC Technical Working Group (TWG) to provide a basis for the RMC Reference Group and other stake holders to understand the value and application of AEM data to the study area. This understanding, combined with the Reference Group's assessment of the final results and taking in account policy and land management issues, will enable the Reference Group to make recommendations to the Australian Government.

The Pine Creek AEM survey was flown over the Pine Creek Orogen in the Northern Territory during 2008 and 2009 as part of the Australian Government's Onshore Energy Security Program at Geoscience Australia (GA). The survey provides pre-competitive data for enhancing uranium and other mineral exploration. Flight line spacing was 1666 m and 5000 m covering an area of 74,000 km2 (roughly the size of Tasmania) which hosts several uranium deposits, including the Ranger Uranium Mine, Rum jungle, Ranger and Nabarlek. The region is also prospective for metals including copper, lead, zinc, gold, tin, rare earths, tantalum, tungsten, molybdenum and nickel. The Pine Creek AEM survey comprises three areas: Kombolgie to the east of Kakadu National Park; Woolner Granite near Darwin; and, Rum Jungle to the west of Kakadu National Park. Collaboration with the National Water Commission and eight private infill companies brought an additional investment of approximately $1 m into the survey, with follow-up exploration equal to or exceeding this amount. The Woolner Granite and Rum Jungle survey area data were acquired using the TEMPEST fixed wing AEM system. The acquisition and processing were carried out by Fugro Airborne Surveys Pty. Ltd., under contract to GA. The Woolner Granite and Rum Jungle surveys were flown between August 2008 and May 2009 and the data were publicly released by GA in July and September 2009 respectively. In the Kombolgie survey area, the data were acquired a by Geotech Airborne Pty. Ltd. using the VTEM helicopter AEM system. The survey was flown between August and November of 2008, and additional calibration flights relating to the survey were flown in April 2009. The Kombolgie data were publicly released by GA in December 2009.

Under the Community Stream Sampling and Salinity Mapping Project, the Australian Government through the Department of Agriculture, Fisheries and Forestry and the Department of Environment and Heritage, acting through Bureau of Rural Sciences, funded an airborne electromagnetic (AEM) survey to provide information in relation to land use questions in selected areas along the River Murray Corridor (RMC). The proposed study areas and major land use issues were identified by the RMC Reference Group at its inception meeting on 26th July, 2006. This report has been prepared to facilitate recommendations on the Barr Creek - Gunbower study area. The work was developed in consultation with the RMC Technical Working Group (TWG) to provide a basis for the RMC Reference Group and other stake holders to understand the value and application of AEM data to the study area. This understanding, combined with the Reference Groups assessment of the final results and taking in account policy and land management issues, will enable the Reference Group to make recommendations to the Australian Government.

The use of airborne electromagnetics (AEM) for hydrogeological investigations often requires high resolution data. Optimisation of AEM data therefore requires careful consideration of AEM system suitability, calibration, validation and inversion methods. In the Broken Hill managed Aquifer Recharge (BHMAR) project, the helicopter-borne SkyTEM transient EM system was selected after forward modeling of system responses and assessment of test line data over potential targets. The survey involved acquisition of 31,834 line km of data over an area of 7,500 km2 of the River Darling Floodplain, and was acquired by two systems over a 9-week period.. Initial Fast Approximate Inversions (FAI) provided within 48 hours of acquisition were used to target 100 sonic and rotary mud holes for calibration and validation. A number of different (Laterally and Spatially Constrained) inversions of the AEM data were carried out, with refinements made as additional information on vertical and lateral constraints became available. Finally, a Wave Number Domain Approximate Inversion procedure with a 1D multi-layer model and constraints in 3D, was used to produce a 3D conductivity model. This inversion procedure only takes days to run, enabling the rapid trialing to select the most appropriate vertical and horizontal constraints. Comparison of borehole induction logs with adjacent AEM fiduciary points confirms high confidence levels in the final inversion. Using this approach has produced quantitative estimates of the 3D conductivity structure that provide a reliable platform for identifying new groundwater resources and a range of MAR options, and developing new geological and hydrogeological conceptual models. Integration of the AEM data with borehole lithology, textural, mineralogical, groundwater and pore fluid hydrochemical and borehole NMR data has enabled maps of hydrostratigraphy, hydraulic conductivity, groundwater salinity, salt store and neotectonics to be produced.

Predictive maps of the subsurface can be generated when geophysical datasets are modelled in 2D and 3D using available geological knowledge. Inversion is a process that identifies candidate models which explain an observed dataset. Gravity, magnetic, and electromagnetic datasets can now be inverted routinely to derive plausible density, magnetic susceptibility, or conductivity models of the subsurface. The biggest challenge for such modelling is that any geophysical dataset may result from an infinite number of mathematically-plausible models, however, only a very small number of those models are also geologically plausible. It is critical to include all available geological knowledge in the inversion process to ensure only geologically plausible physical property models are recovered. Once a set of reasonable physical property models are obtained, knowledge of the physical properties of the expected rocks and minerals can be used to classify the recovered physical models into predictive lithological and mineralogical models. These predicted 2D and 3D maps can be generated at any scale, for Government-funded precompetitive mapping or drilling targets delineation for explorers.

The Frome airborne electromagnetic (AEM) survey is the largest of three regional AEM surveys flown under the 5-year Onshore Energy Security Program (OESP) by Geoscience Australia (GA). The aim of the survey is to reduce risk and stimulate exploration investment for uranium by providing reliable pre-competitive data. The Frome AEM survey was flown between 22 May and 2 November 2010, is approximately 95 450 km2 in area and collected 32 317 line km of new data at an average flying height of 100 m. The Frome AEM survey covers the Marree (pt), Callabonna (pt), Copley (pt), Frome (pt), Parachilna (pt), Curnamona, Olary and Chowilla (pt) 1:250 000 standard map sheets in South Australia and was flown largely at 2.5 km line spacing, with the northern portion flown at 5 km line spacing. GA partnered with, the Department of Primary Industries and Resources South Australia and an industry consortium. The survey results indicate a depth of investigation (DOI - depth of reliable signal penetration) of up to 400 m in areas of thin cover and resistive basement (e.g., Adelaidean rocks in the Olary Ranges). In Cenozoic - Mesozoic sediments in the Frome Embayment and the Murray Basin the DOI is up to 100-150 m. A range of under-cover features are revealed, including (but not limited to): extensions to known palaeovalley networks in the Frome Embayment; the under-cover extent of the Benagerie Ridge; regional faults in the Frome Embayment and Murray Basin; folded and faulted Neoproterozoic rocks in the Adelaide Fold Belt; Cenozoic - Mesozoic stratigraphy in the Frome Embayment; neotectonic offsets in the Lake Eyre Basin; conductive Neoproterozoic rocks associated with copper-gold mineralisation; and, coal-bearing structures in the Leigh Creek area, as well as groundwater features.

Airborne Geophysical Data Acquired as part of the Gawler Mineral Promotion Project. Includes point located, gridded and image data. TEMPEST electromagnetics, magnetics and elevation data.

An integrated multi-scale approach has been used to map and assess shallow (<100m) aquitards in unconsolidated alluvial sediments beneath the Darling River floodplain. The study integrated a regional-scale (7,500km2) airborne electromagnetics (AEM) survey with targeted ground electrical surveys, downhole lithological and geophysical (induction, gamma and nuclear magnetic resonance (NMR)) logging, hydraulic testing and hydrogeochemistry obtained from a 100 borehole (7.5km) sonic and rotary drilling program. Electrical conductivity mapping confirmed a relatively continuous lacustrine Blanchetown Clay aquitard, mostly below the water table. The Blanchetown Clay is typically 5-10m thick with a maximum thickness of 18m but, importantly, can also be absent. Variations (up to 60m) in the elevation of the aquitard top surface are attributed partly to neotectonics, including warping, discrete fault offsets, and regional tilting. Hydrograph responses in overlying and underlying aquifers, laboratory permeameter measurements on cores, and hydrogeochemical data demonstrate where the Blanchetown Clay acts as an effective aquitard. In these areas, the AEM and induction logs can show an electrical conductivity (EC) decrease towards the centre of the clay rich aquitard, contrary to the typical response of saturated clays. Even though the aquitard centre is below the watertable, core moisture data and NMR total water logs indicate very low water content, explaining the relatively low EC response. The NMR logs also indicate that the clay aquitard is partially saturated both from the top and the bottom. This suggests very low hydraulic conductivities for the aquitard resulting in negligible vertical leakage in these areas. This is supported by core permeameter measurements of less than 10-12 m/s.