<div>The Abbot Point to Hydrographers Passage bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the RV Escape during the period 6 Oct 2020 – 16 Mar 2021. This was a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Point through Hydrographers Passage QLD. Bathymetry data was acquired using a Kongsberg EM 2040, and processed using QPS QINSy. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

Two bathymetric surveys of Darwin Harbour were undertaken during the period 17 October to 07 November 2010 and 24 June to 20 August 2011 by iXSurvey Australia Pty Ltd for Darwin Port Corporation and Department of Lands Planning, and the Department of Natural Resources, Environment, The Arts and Sport (NRETAS) in collaboration with Geoscience Australia (GA), the Darwin Port Corporation (DPC) and the Australian Institute of Marine Science (AIMS) using iXSurvey's and GA's Kongsberg EM3002D multibeam sonar systems and DPC's vessel 'Matthew Flinders'.

Geoscience Australia undertook a marine survey of the Leveque Shelf (survey number (GA-0340/SOL5754), a sub-basin of the Browse Basin, in May 2013. This survey provides seabed and shallow geological information to support an assessment of the CO2 storage potential of the Browse sedimentary basin. The basin, located on the Northwest Shelf, Western Australia, was previously identified by the Carbon Storage Taskforce (2009) as potentially suitable for CO2 storage. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2 within reasonable distances of major sources of CO2 emissions. The principal aim of the Leveque Shelf marine survey was to look for evidence of any past or current gas or fluid seepage at the seabed, and to determine whether these features are related to structures (e.g. faults) in the Leveque Shelf area that may extend to the seabed. The survey also mapped seabed habitats and biota to provide information on communities and biophysical features that may be associated with seepage. This research, combined with deeper geological studies undertaken concurrently, addresses key questions on the potential for containment of CO2 in the basin's proposed CO2 storage unit, i.e. the basal sedimentary section (Late Jurassic and Early Cretaceous), and the regional integrity of the Jamieson Formation (the seal unit overlying the main reservoir).

<b>This record was superseded on 11/11/2022 with approval from Director, National Seabed Mapping as it has been superseded by eCat 147191</b> Seabed mapping data collected using a Kongsberg 2040C multibeam sonar system aboard research vessel MVYolla including bathymetry (2 metre resolution), backscatter (1metre resolution), watercolumn and preliminary hard bottom classification. Seabed mapping in Apollo Marine Park with 114 square kilometres of continuous seabed mapping conducted by Deakin University in partnership with iXblue for Parks Australia.

The Peterborough to Port Fairy bathymetry survey was acquired by Deakin University Marine Mapping lab onboard the M/V Yolla during the period 28 May 2018 - 19 June 2018 using a Kongsberg EM2040C multibeam sonar system. The survey was completed as part of the Victorian Coastal Monitoring Program, which requires bathymetry data to understand offshore sediment dynamics within Victorian coastal waters. This dataset contains a 2m-resolution 32-bit floating point GeoTIFF file of the bathymetry in the study area, derived from the processed EM2040C bathymetry data using CARIS HIPS and SIPS software. This dataset is not to be used for navigational purposes.

Geoscience Australia carried out marine surveys in southeast Tasmania in 2008 and 2009 (GA0315) to map seabed bathymetry and characterise benthic environments through observation of habitats using underwater towed video. Data was acquired using the Tasmania Aquaculture and Fisheries Institute (TAFI) Research Vessel Challenger. Bathymetric mapping was undertaken in seven survey areas, including: Freycinet Pensinula (83 sq km, east coast and shelf); Tasman Peninsula (117 sq km, east coast and shelf); Port Arthur and adjacent open coast (17 sq km); The Friars (41 sq km, south of Bruny Island); lower Huon River estuary (39 sq km); D Entrecastreaux Channel (7 sq km, at Tinderbox north of Bruny Island), and; Maria Island (3 sq km, western side). Video characterisations of the seabed concentrated on areas of bedrock reef and adjacent seabed in all mapped areas, except for D Entrecastreaux Channel and Maria Island. The dataset contains 8 bathymetry grids produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software. Please see the metadata informaiton for detailed information.

This resource includes bathymetry data acquired by Geoscience Australia bathymetry survey during the period of 21 September and 17 October 2011 onboard the RV Southern Surveyor using a Kongsberg Maritime EM300 multibeam sonar. The SS2011-V05/ GA-0332/20110018S bathymetry survey was led by Dr. Andrew Jones (Geoscience Australia). The primary objectives of the survey were to map the spatial distribution of seepage sites and characterise the nature of the seepage at these sites (gas vs oil, macroseepage vs microseepage; palaeo vs modern day seepage) on the basis of: acoustic signatures in the water column, shallow subsurface and on the seabed; geochemical signatures in rock and sediment samples and the water column; and biological signatures on the seabed. This dataset contains a 32 and 15m-resolution, 32-bit floating point GeoTIFF grid files of the bathymetry in the study area, derived from the processed EM300 bathymetry data, using CARIS HIPS and SIPS software. Those grids were projected to WGS84 UTM 49S and 50S. Vertical Datum: MSL This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

The WA Margins Reconnaissance survey, GA-2476 was acquired during October 2008 to January 2009 onboard the RV Sonne as part of the Energy Security Program. Almost 230,000 km² of multibeam bathymetry was acquired over the duration of the survey including all transits. Seafloor features revealed by the backscatter and swath bathymetry have shown that geomorphology of the study areas is diverse. The continental slope of the west Australian margin study areas is characterised by large areas with numerous deeply incised canyons and areas with low-angle slumps and scarps mostly on the upper part of the slope. Other geomorphic features on the continental slope include short escarpments of local extent and small volcanic peaks over the Houtman Sub-basin part of the Perth margin. New bathymetry from the Cuvier Plateau has mapped large volcanic domes, some of them with terraces, ridges, a large previously unmapped valley and two large seamounts (newly named the Cuvier Seamount and the Wallaby seamount). The dataset contains eight XYZ grids of 100m resolution; colour tiff images shaded with sun azimuth 45 degrees and a geotiff of the entire survey with a depth legend to go with the images.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia conducted a marine survey to provide seabed environmental information to support the assessment of the CO2 storage potential of the Vlaming Sub-Basin. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2. The major aim of this survey was to look for evidence of any gas fluid seepage at the seabed and wether the location had faults that have been identified in a number of seismic lines. The survey also mapped seabed biota in the area of interest to indentify any biota communities that are related with seepage. This research addresses key questions of the regional seal integrity of the Southern Perth Shale and the potential for storing of CO2 in the Early Cretaceous Gage Sandstone. The survey was conducted by Fugro's Southern Supporter in the Vlaming Sub-Basin, North and South of Rotnest Island between the period of the 17th of March to the 20th of April 2012. Shallow seismic sub bottom profiler data were acquired as well as high resolution multibeam bathymetry and backscatter data during the survey. This dataset is not to be used for navigational purposes.<p><p>This dataset is not to be used for navigational purposes.

This resource contains multibeam bathymetry data for the continental shelf area of Flinders Commonwealth Marine Reserve, northeast Tasmania. Multibeam data were collected by Geoscience Australia and University of Tasmania during the period of 24 June - 07 July 2012 onboard the RV Challenger using a Kongsberg EM3002 multibeam sonar. The Flinders Marine Reserve survey was led by Dr. Scott Nichol (Geoscience Australia). The survey was conducted to broadly classify the seabed into hard (bedrock reef), soft (sedimentary) and mixed substrate types at select locations across the shelf. The dataset contains a 2m-resolution, 32-bit floating point GeoTIFF file of the bathymetry in the study area derived from the processed EM3002 bathymetry data, using Caris HIPS and SIPS software. Attribution statement: Data was sourced from the NERP Marine Biodiversity Hub. The Marine Biodiversity Hub is supported through funding from the Australian Government's National Environmental Research Program (NERP), administered by the Department of Sustainability, Environment, Water, Population and Communities (DSEWPAC). This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.