Geoscience Australia conducted a marine survey to provide seabed environmental information to support the assessment of the CO2 storage potential of the Vlaming Sub-Basin. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2. The major aim of this survey was to look for evidence of any gas fluid seepage at the seabed and wether the location had faults that have been identified in a number of seismic lines. The survey also mapped seabed biota in the area of interest to indentify any biota communities that are related with seepage. This research addresses key questions of the regional seal integrity of the Southern Perth Shale and the potential for storing of CO2 in the Early Cretaceous Gage Sandstone. The survey was conducted by Fugro's Southern Supporter in the Vlaming Sub-Basin, North and South of Rotnest Island between the period of the 17th of March to the 20th of April 2012. Shallow seismic sub bottom profiler data were acquired as well as high resolution multibeam bathymetry and backscatter data during the survey. This dataset is not to be used for navigational purposes.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia undertook a marine survey of the Leveque Shelf (survey number (GA-0340/SOL5754), a sub-basin of the Browse Basin, in May 2013. This survey provides seabed and shallow geological information to support an assessment of the CO2 storage potential of the Browse sedimentary basin. The basin, located on the Northwest Shelf, Western Australia, was previously identified by the Carbon Storage Taskforce (2009) as potentially suitable for CO2 storage. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2 within reasonable distances of major sources of CO2 emissions. The principal aim of the Leveque Shelf marine survey was to look for evidence of any past or current gas or fluid seepage at the seabed, and to determine whether these features are related to structures (e.g. faults) in the Leveque Shelf area that may extend to the seabed. The survey also mapped seabed habitats and biota to provide information on communities and biophysical features that may be associated with seepage. This research, combined with deeper geological studies undertaken concurrently, addresses key questions on the potential for containment of CO2 in the basin's proposed CO2 storage unit, i.e. the basal sedimentary section (Late Jurassic and Early Cretaceous), and the regional integrity of the Jamieson Formation (the seal unit overlying the main reservoir).

The Mentelle Basin survey GA-0293, SS08/2005 was acquired by Geoscience Australia onboard the RV Southern Surveyor from the 28th of September to the 19th of October 2005. This deep water rift basin (up to 4500m depth) is located offshore from Fremantle on the SW Australian margin. The objectives of the survey was to study deep water marine habitats and to assess the petroleum potential of the Mentelle Basin. The swath data collected covered a new area of seabed that revealed the extents of the blind submarine canyons and completed the coverage of the Perth Canyon and filled the remaining gaps with high resolution swath bathymetry data.<p><p>This dataset is not to be used for navigational purposes.

The remote Eastern frontiers project aimed to provide a geological and petroleum prospectivity assessement of the Faust Capel Basins. Funded through Australian Governement Initiatives (Energy Security Program). The Faust Capel Basins survey GA-2436/ TAN0713 was acquired by Geoscience Australia onboard the RV Tangaroa (operated by NIWA) from the 6th of October to the 22nd of November 2007. The geographic range stretched from Wellington to the Faust Capel Basins to Lord Howe Island and back to Wellington. Approximately 8,945 sailing km of multibeam bathymetry was acquired. The high resolution bathymetry data imaged seafloor features in unprecedented detail, revealing the effects of recent magmatic activity and fluid migration on the seafloor. It also produced a new image of a flat topped unexplored seamount. A member of the Lord Howe Rise seamount chain.<p><p>This dataset is not to be used for navigational purposes.

The Petrel Sub-basin CO2 storage 2D seismic survey GA-0336, was acquired by the MV Duke in the Bonaparte Bay, NW Australia for Geoscience Australia between the the 3rd of May to the 24th of June 2012. This survey was part of the Australian government's National Low emission Coal Initiative (NLECI).The purpose was to acquire geophysical data on shallow water (less than 120m water depth) in the Petrel sub-basin to support investigation for CO2 storage potential in the area. Multibeam bathymetry data was acquired by the vessel at the same time as the seismic data. This bathymetry dataset consist of the high resolution bathymetry grids (2m) of all the swath data acquired by the MV Duke.<p><p>This dataset is not to be used for navigational purposes.

The EM300 Sea Trials survey GA-2354, was acquired by Geoscience Australia after the installation of the new multibeam bathymetry acquisition system EM300 onboard the RV Southern Survey during the 16 to 18th of December 2003. The survey location was offshore Fremantle around the Perth Canyon. The aim of the survey was to test the bathymetry system installed on the vessel. The bathymetry grids consists of 10 and 40m resolution grids projected in Easting and Northing WGS84 UTM 50S.<p><p>This dataset is not to be used for navigational purposes.

Two bathymetric surveys of Darwin Harbour were undertaken during the period 17 October to 07 November 2010 and 24 June to 20 August 2011 by iXSurvey Australia Pty Ltd for Darwin Port Corporation and Department of Lands Planning, and the Department of Natural Resources, Environment, The Arts and Sport (NRETAS) in collaboration with Geoscience Australia (GA), the Darwin Port Corporation (DPC) and the Australian Institute of Marine Science (AIMS) using iXSurvey's and GA's Kongsberg EM3002D multibeam sonar systems and DPC's vessel 'Matthew Flinders'.

<b>This record was superseded on 13/02/2023 with approval from the Director, National Seabed Mapping as it has been superseded by <a href="https://pid.geoscience.gov.au/dataset/ga/147703">eCat 147703</a></b> <p>The existing regional bathymetric grid of the Kerguelen Plateau, south-west Indian Ocean, was updated using new singlebeam echosounder data from commercial fishing and research voyages, and some new multibeam swath bathymetry data. Source bathymetry data varies from International Hydrographic Organisation (IHO) S44 Order 1a to 2. The source data were subjected to area-based editing to remove data spikes, then combined with the previous Sexton (2005) grid to produce a new grid with a resolution of 0.001-arcdegree. Satellite-derived datasets were used to provide island topography and to fill in areas of no data. The new grid improves the resolution of morphological features observed in earlier grids, including submarine volcanic hills on the top of the Kerguelen Plateau and a complex of submarine channels draining the southern flank of the bank on which Heard Island sits. <p>The Heard and McDonald Islands are situated on the Kerguelen Plateau and lie within Australia's marine jurisdiction.<p><p>This dataset is not to be used for navigational purposes.

This dataset contains the processed bathymetric dataset from the Lord Howe and Lord How Island survey area held by Geoscience Australia. This dataset includes multibeam echosounder data and was gridded at 50m resolution of the Lord Howe survey area and a 10m resolution of Lord Howe Island, based on the optimal resolution for the depth range encountered. The objective of the survey on the Lord Howe Island shelf (NSW) in 2008 (SS062008) was to map seabed bathymetry and characterise benthic environments through co-located sampling of surface sediments and infauna, rock coring, observation of benthic habitats using underwater towed video, and measurement of ocean tides and wavegenerated currents. Subbottom profile data was also collected to map sediment thickness and shelf stratigraphy. Data and samples were acquired using the National Facility Research Vessel Southern Surveyor. This dataset is published with the permission of the CEO, Geoscience Australia. Not to be used for navigational purposes.

The TOPAS Sea Trials survey GA-2361, was acquired by Geoscience Australia after the installation of the new Sub bottom profiler (TOPAS) onboard the RV Southern Surveyor during the 9th and the 10th of December 2004. The survey loacation was offshore Brisbane. The aim of the survey was to test the new sub bottom profiler installed onboard. The bathymetry grids consists of 5,10 and 40 resolution projected in Easting and Northing WGS84, UTM56S.<p><p>This dataset is not to be used for navigational purposes.