Diatom assemblages in sandy deposits of the 2004 tsunami at Phra Thong Island, Thailand may provide clues to flow conditions during the tsunami. The tsunami deposits contain one or more beds that fine upward, commonly from medium sand to silty very fine sand. Diatom assemblages of the lowermost portion of the deposit predominantly comprise of unbroken beach and subtidal species that live attached to sand grains. The dominant taxa shift to marine plankton species in the middle of the bed and to a mix of freshwater, brackish, and marine species near the top. These trends are consistent with expected changes in current velocities of tsunami through time. During high current velocities, medium sand is deposited; only beach and subtidal benthic diatoms attached to sediment can be incorporated into the tsunami deposit. High shear velocity keeps finer material, including planktonic diatoms in suspension. With decreasing current velocities, finer material including marine plankton can be deposited. Finally, during the lull between tsunami waves, the entrained freshwater, brackish, and marine species settle out with mud and plant trash. Low numbers of broken diatoms in the lower medium sand implies rapid entrainment and deposition, whilst selective breakage of marine plankton (Thalassionema nitzschioides, and Thalassiosira and Coscinodiscus spp.) in the middle portion of the deposit probably results from abrasion in the turbulent current before deposition.

In this study detailed mapping of seismic data from the 1529 km2 Beagle multi-client 3D seismic survey was undertaken to provide a better understanding of the geological history of the central Beagle Sub-basin. Situated in the Northern Carnarvon Basin, oil discovered at Nebo 1 in 1993 indicated the presence of at least one active petroleum system. The central part of the sub-basin has a N-trending horst-graben architecture. Two rifting events from the Hettangian to Sinemurian and the Callovian to Oxfordian were identified. A series of tilted fault blocks formed by the rifting events were locally eroded and progressively draped and buried by post-rift thermal subsidence sedimentation. Mapping indicated the Post-rift I Lower Cretaceous Muderong Shale regional seal is anomalously thin or absent in the intra-horst graben area. Burial history 1D modelling indicates that at Nebo 1, the most rospective potential source rocks within the Middle-Upper Jurassic section where in the early oil window; however, if present within the Beagle and Cossigny trough depocentres, these sediments would have entered the oil window prior to the deposition of the Muderong Shale regional seal. Upper Jurassic shales provide seal for the oil pool intersected in Nebo 1. The Tertiary section is dominated by a prograding carbonate wedge which has driven a second phase of thermal maturation observed in the Paleogene (Nebo 1) and Miocene (Manaslu 1). Potential source rocks are currently at their maximum depth of burial and maximum thermal maturity. Modest inversion on some faults prior to the Early Cretaceous has created traps and if source rocks retain generative potential, favourable traps could be now actively receiving hydrocarbon charge. Potential plays include compaction folds over tilted horst blocks, drape and small inversion induced anticlines, basin-floor fans and intra-formational traps. Deep faults may act as conduits for hydrocarbons migrating from mature potential source rocks into Jurassic to Cretaceous plays. Younger sediments appear to lack access to migration pathways provided by deeper faults.

On 23 March 2012, at 09:25 GMT, a MW 5.4 earthquake occurred in the eastern Musgrave Ranges region of north-central South Australia, near the community of Ernabella (Pukatja). Several small communities in this remote part of central Australia reported the tremor, but there were no reports of injury or significant damage. This was the largest earthquake to be recorded on mainland Australia for the past 15 years and resulted in the formation of a 1.6 km-long surface deformation zone comprising reverse fault scarps with a maximum vertical displacement of over 0.5 m, extensive ground cracking, and numerous rock falls. The maximum ground-shaking is estimated to have been in the order of MMI VI. The earthquake occurred in non-extended Stable Continental Region (SCR) cratonic crust, over 1900 km from the nearest plate boundary. Fewer than fifteen historic earthquakes worldwide are documented to have produced co-seismic surface deformation (i.e. faulting or folding) in the SCR setting. The record of surface deformation relating to the Ernabella earthquake therefore provides an important constraint on models relating surface rupture length to earthquake magnitude. Such models may be employed to better interpret Australia's rich prehistoric record of seismicity, and contribute to improved estimates of seismic hazard.

This paper presents a new style of bedload parting from western Torres Strait, northern Australia. Outputs from a hydrodynamic model identified an axis of bedload parting centred on the western Torres Strait islands (~142°15"E). Unlike bedload partings described elsewhere in the literature, those in Torres Strait are generated by incoherence between two adjacent tidal regimes as opposed to overtides. Bedload parting is further complicated by the influence of wind-driven currents. During the trade wind season, wind-driven currents counter the reversing tidal currents to a point where peak currents are directed west. The eastwards-directed bedload pathway is only active during the monsoon season. Satellite imagery was used to describe six bedform facies associated with the bedload parting. Bedform morphology was used to indicate sediment supply. Contrary to bedload partings elsewhere, sand ribbons are a distal facies within the western bedload transport pathway despite peak currents directed toward the west throughout the year. This indicates that sediment is preferentially trapped within sand banks near the axis of parting and not transported further west into the Gulf of Carpentaria or Arafura Sea.

The surface sedimentary record from six sediment cores collected from beneath the Amery Ice Shelf, East Antarctica, provides a unique view of the sedimentary and oceanographic processes in this sub-ice shelf setting. The composition and age of the surface sediments indicate spatial variations in ice shelf cavity-ocean interaction, which are consistent with patterns of ocean inflow and outflow modelled and observed beneath the ice shelf. Sediments within 100 km of the ice shelf front (site AM01b) show the greatest open ocean influence with a young surface age and the highest total diatom abundance, compared to older ages and lower diatom abundances at sites deeper in the cavity (AM03 to AM06). The variable marine influence between sites determines the nature of benthic communities, with seabed imagery indicating the existence of sessile suspension feeders in areas of strong marine inflow (site AM01b), while grazers, deposit feeders and a few suspension feeders occur at sites more distal from the shelf calving front where the food supply is lower (sites AM03 and AM04). Understanding the sedimentary and oceanographic processes within the sub-ice shelf environment allows better constraint of interpretations of down core sediment records, an improved understanding of the nature of biological communities in sub-ice shelf environments, and a baseline for determining the sensitivity of the system to any future changes in ocean dynamics.

Changes in microbial diversity and population structure occur as a result of increased nutrient loads and knowledge of microbial community composition may be a useful tool for assessing water quality in coastal ecosystems. However, the ability to understand how microbial communities and individual species respond to increased nutrient loads is limited by the paucity of community-level microbial data. The microbial community composition in the water column and sediments was measured across tropical tidal creeks and the relationship with increased nutrient loads assessed by comparing sewage-impacted and non-impacted sites. Diversity-function relationships were examined with a focus on denitrification and the presence of pathogens typically associated with sewage effluent tested. Significant relationships were found between the microbial community composition and nutrient loads. Species richness, diversity and evenness in the water column all increased in response to increased nutrient loads, but there was no clear pattern in microbial community diversity in the sediments. Water column bacteria also reflected lower levels of denitrification at the sewage-impacted sites. The genetic diversity of pathogens indicated that more analysis would be required to verify their status as pathogens, and to develop tests for monitoring. This study highlights how microbial communities respond to sewage nutrients in a tropical estuary. Estuarine, Coastal and Shelf Science

Sub-sampling is a commonly used technique to reduce the amount of time and effort for investigating biological specimens of, especially, a large quantity. However, it is not immediately clear how sub-sampling may affect the estimates of biodiversity measures such as species presence/absence, richness and abundance by using such sub-sampled data. This article quantifies the effect of sub-sampling as attenuation of the species abundance distribution. Its theoretical description is derived by accounting for the random sampling scheme of finite populations and is illustrated using sub-sampled data collected by a marine survey. It shows the theory and data are in agreement. Our method can be used to set benchmarks for sub-sampling schemes since the departure from this model estimates the unexpected bias peculiar to the sub-sampling scheme adopted. This quantification also enables the effect of sub-sampling to be incorporated into further model development for biodiversity estimates.

Tropical cyclones affect storm-dominated sediment transport processes that characterise Holocene shelf deposits in many shelf environments. In this paper, we describe the geomorphology of reef talus deposits found in the Gulf of Carpentaria and Arafura Sea, Australia,that we attribute to tropical cyclones. The orientation of these deposits is also indicative of a consistent, along-coast transport pathway.

Spatial interpolation methods are often data-specific or even variable-specific. Many factors affect the performance of the methods and there are no consistent findings about their effects. Hence it is difficult to select an appropriate method for a given dataset. This review provides guidelines and suggestions regarding application of spatial interpolation methods to environmental data by comparing the features of the commonly applied methods which fall into three categories, namely: non-geostatistical interpolation methods, geostatistical interpolation methods and combined methods. Factors affecting the performance, including sampling design, sample spatial distribution, data quality, correlation between primary and secondary variables, and interaction among factors, are discussed. A total of 26 methods are then classified based on their features to provide an overview of the relationships among them. These features are quantified and then clustered to show similarities among these 26 methods. A decision tree for selecting an appropriate method from these 26 methods is developed based on data availability, data nature, the expected estimation and the features of each method. A list of software packages for spatial interpolation is provided. Finally, some recommendations are made for applying the methods to marine environmental data.

A 2-D crustal velocity model has been derived from a 1997 364 km north-south wide-angle seismic profile that passed from Ordovician volcanic and volcaniclastic rocks (Molong Volcanic Belt of the Macquarie Arc) in the north, across the Lachlan Transverse Zone into Ordovician turbidites and Early Devonian intrusive granitoids in the south. The Lachlan Transverse Zone is a proposed west-northwest to east-southeast structural feature in the Eastern Lachlan Orogen and is considered to be a possible early lithospheric feature controlling structural evolution in eastern Australia; its true nature, however, is still contentious. The velocity model highlights significant north to south lateral variations in subsurface crustal architecture in the upper and middle crust. In particular, a higher P-wave velocity (6.24-6.32 km/s) layer identified as metamorphosed arc rocks (sensu lato) in the upper crust under the arc at 5-15 km depth is juxtaposed against Ordovician craton-derived turbidites by an inferred south-dipping fault that marks the southern boundary of the Lachlan Transverse Zone. Near-surface P-wave velocities in the Lachlan Transverse Zone are markedly less than those along other parts of the profile and some of these may be attributed to mid-Miocene volcanic centres. In the middle and lower crust there are poorly defined velocity features that we infer to be related to the Lachlan Transverse Zone. The Moho depth increases from 37 km in the north to 47 km in the south, above an underlying upper mantle with a P-wave velocity of 8.19 km/s. Comparison with velocity layers in the Proterozoic Broken Hill Block supports the inferred presence of Cambrian oceanic mafic volcanics (or an accreted mafic volcanic terrane) as substrate to this part of the Eastern Lachlan Orogen. Overall, the seismic data indicate significant differences in crustal architecture between the northern and southern parts of the profile. The crustal-scale P-wave velocity differences are attributed to the different early crustal evolution processes north and south of the Lachlan Transverse Zone.