<div>The Abbot Point to Hydrographers Passage bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the RV Escape during the period 6 Oct 2020 – 16 Mar 2021. This was a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Point through Hydrographers Passage QLD. Bathymetry data was acquired using a Kongsberg EM 2040, and processed using QPS QINSy. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

This resource contains bathymetry and backscatter data for the Oceanic Shoals Commonwealth Marine Reserve (CMR) in the Timor Sea collected by Geoscience Australia during September and October 2012 on RV Solander (survey GA0339/SOL5650). The survey used a Kongsberg EM3002 300 kHz multibeam sonar system mounted in single head configuration to map four areas, covering a combined area of 507 square kilometres. Data are gridded to 2 m spatial resolution. The Oceanic Shoals Commonwealth Marine Reserve survey was undertaken as an activity within the Australian Government's National Environmental Research Program Marine Biodiversity Hub and was the key component of Research Theme 4 - Regional Biodiversity Discovery to Support Marine Bioregional Plans. Hub partners involved in the survey included the Australian Institute of Marine Science, Geoscience Australia, the University of Western Australia, Museum Victoria and the Museum and Art Gallery of the Northern Territory. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; sub-bottom acoustic profiles; physical samples of seabed sediments, infauna and epibenthic biota; towed underwater video and still camera observations of seabed habitats; baited video observations of demersal and pelagic fish, and; oceanographic measurements of the water column from CTD (conductivity, temperature, depth) casts and from deployment of sea surface drifters. Further information on the survey is available in the post-survey report published as Geoscience Australia Record 2013/38 (Nichol et al. 2013).<p><p>This dataset is not to be used for navigational purposes.

The Northern Approaches to Broome multibeam survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Bhagwan K during the period 05 August– 02 October 2020. This was a contracted survey conducted by EGS as part of the Hydroscheme Industry Partnership Program. The survey area encompasses the northern approaches to Broome, WA located between the Talboys Rock and Gantheaume Point, Western Australia. Bathymetry data was acquired using a Kongsberg EM2040D 200-400 kHz and processed using QPS QINSy 9.2.3 processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area. <BR>This dataset is not to be used for navigational purposes.

Geoscience Australia conducted a marine seismic survey (GA-0352) over poorly defined areas of the Gippsland Basin between 5th of April to the 24th of April 2015. The aim was to acquire industry-standard precompetitive 2D seismic data, Multi-beam echo-sounder (MBES) and sub-bottom profiling (SBP) data to support an assessment of the CO2 storage potential of the basin. The survey, undertaken as part of the Department of Industry and Science's National CO2 Infrastructure Plan (NCIP), aimed to identify and characterise indicators of natural hydrocarbon or fluid seepage that may indicate compromised seal integrity in the region. The data collected during this survey will enhance sequence stratigraphic studies in the Gippsland Basin that provide constraints on the most suitable areas for storage of CO2 and help to identify potential CO2 storage reservoirs. The survey was conducted by Gardline CGG vessel MV Duke The data collected during the survey are available for free download from the Geoscience Australia website. This dataset include all the bathymetry data collected during the survey.<p><p>This dataset is not to be used for navigational purposes.

This dataset contains bathymetry products from the Lord Howe Rise 2D Seismic Survey undertaken by Geoscience Australia (GA) and the Japan Agency for Marine-Earth Science and Technology (JAMSTEC) during the period from 17 March to 16 May 2016 onboard the RV Kairei (Survey KR1605). The Lord Howe Rise (LHR) is a submerged plateau that extends from southwest New Caledonia to the west of New Zealand. Much of the LHR lies within the Australian marine jurisdiction at water depths of 1000-3000m. The Commonwealth conducted a scientific seismic survey over the Lord Howe Rise in 2016 in collaboration with JAMSTEC. This collaboration contributes to a larger research proposal submitted to the International Ocean Discovery Program (IODP) that would provide the first deep stratigraphic record for the Cretaceous Eastern Gondwana Margin. The IODP proposal, if funded, is to drill a deep stratigraphic well to a depth of 2-3 km below the seabed, possibly in 2020. In order to select the drill sites, GA and JAMSTEC are conducting site assessments that involve a seismic survey in 2016 and a geotechnical survey in 2017. Multibeam bathymetry data were acquired during the survey covering an area of 62,360 km2. Eight bathymetry grids of 50 to 80m resolution were produced using the shipborne 12 KHz sonar system.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia carried out a marine survey on Carnarvon shelf (WA) in 2008 (SOL4769) to map seabed bathymetry and characterise benthic environments through colocated sampling of surface sediments and infauna, observation of benthic habitats using underwater towed video and stills photography, and measurement of ocean tides and wavegenerated currents. Data and samples were acquired using the Australian Institute of Marine Science (AIMS) Research Vessel Solander. Bathymetric mapping, sampling and video transects were completed in three survey areas that extended seaward from Ningaloo Reef to the shelf edge, including: Mandu Creek (80 sq km); Point Cloates (281 sq km), and; Gnaraloo (321 sq km). Additional bathymetric mapping (but no sampling or video) was completed between Mandu creek and Point Cloates, covering 277 sq km and north of Mandu Creek, covering 79 sq km. Two oceanographic moorings were deployed in the Point Cloates survey area. The survey also mapped and sampled an area to the northeast of the Muiron Islands covering 52 sq km. The dataset contains 6 bathymetry grids of the Carnarvon Shelf study area produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software. Please see the metadata for detailed information.<p><p>This dataset is not to be used for navigational purposes.

The Mavis Reef bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the M/V Warrego during the period 08 January – 09 August 2021. This was a contracted survey conducted by Neptune Marine Services under the HydroScheme Industry Partnership Program (HIPP). The survey area is located east of Mavis Reef, at the southern extent of the Bonaparte Archipelago, offshore northwestern Australia. Bathymetry data were acquired using a R2Sonic 2024 multibeam sonar system and processed using QPS Qimera V2.0.1 and exported to GeoTIFF using CARIS HIPS and SIPS software. This dataset contains a 30m-resolution 32-bit floating point GeoTIFF file of the bathymetry in the survey area. This dataset is not to be used for navigational purposes.

<p>Australia has established a network of 58 marine parks within Commonwealth waters covering a total of 3.3 million square kilometres, or 40 per cent of our exclusive economic zone (excluding Australian Antarctic Territory). These parks span a range of settings, from near coastal and shelf habitats to abyssal plains. Parks Australia manages the park network through management plans that came into effect for all parks on 1 July 2018. Geoscience Australia is contributing to their management by collating and interpreting existing environmental data, and through the collection of new marine data. “Eco-narrative” documents are being developed for those parks, where sufficient information is available, delivering collations and interpretations of seafloor geomorphology, oceanography and ecology. Many of these interpretations rely on bathymetric grids and their derived products, including those in this data release. <p>Bathymetry grids <p>The bathymetry of the marine parks was created by compiling and processing Geoscience Australia’s bathymetry data holding gridded at the optimum resolution depending of the vessel’s sonar system. <p>The bathymetry of the park is illustrated by a panchromatic geotiff image, developed by combining the bathymetric data with a hillshade image. <p> Morphological Surfaces <p>Geoscience Australia has developed a new marine seafloor classification scheme, which uses the two-part seafloor mapping morphology approach of Dove et al (2016). This new scheme is semi-hierarchical and the first step divides the slope of the seafloor into three Morphological Surface categories (Plain, <2°; Slope, 2-10°; Escarpment, >10°). <p>Dove, D., Bradwell, T., Carter, G., Cotterill, C., Gafeira, J., Green, S., Krabbendam, M., Mellet, C., Stevenson, A., Stewart, H., Westhead, K., Scott, G., Guinan, J., Judge, M. Monteys, X., Elvenes, S., Baeten, N., Dolan, M., Thorsnes, T., Bjarnadóttir, L., Ottesen, D. (2016). Seabed geomorphology: a twopart classification system. British Geological Survey, Open Report OR/16/001. 13 pages. <p>This research is supported by the National Environmental Science Program (NESP) Marine Biodiversity Hub through Project D1.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia undertook a marine survey of the Leveque Shelf (survey number (GA-0340/SOL5754), a sub-basin of the Browse Basin, in May 2013. This survey provides seabed and shallow geological information to support an assessment of the CO2 storage potential of the Browse sedimentary basin. The basin, located on the Northwest Shelf, Western Australia, was previously identified by the Carbon Storage Taskforce (2009) as potentially suitable for CO2 storage. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2 within reasonable distances of major sources of CO2 emissions. The principal aim of the Leveque Shelf marine survey was to look for evidence of any past or current gas or fluid seepage at the seabed, and to determine whether these features are related to structures (e.g. faults) in the Leveque Shelf area that may extend to the seabed. The survey also mapped seabed habitats and biota to provide information on communities and biophysical features that may be associated with seepage. This research, combined with deeper geological studies undertaken concurrently, addresses key questions on the potential for containment of CO2 in the basin's proposed CO2 storage unit, i.e. the basal sedimentary section (Late Jurassic and Early Cretaceous), and the regional integrity of the Jamieson Formation (the seal unit overlying the main reservoir).

The NSW Continental Slopes survey GA-2413, SS10/2006 was acquired by Geoscience australia onboard the RV Southern Surveyor from the 12th of October to the 25th of October 2006. The geographical range stretched from Jervis bay in the South to Port Stephens in the North. The aim was to assess the physical nature of the NSW continental slope, improve our understanding of the surface and subsurface structure of the continental slope and to investigate the history of sediment movement along the continental slope.<p><p>This dataset is not to be used for navigational purposes.