Geoscience Australia carried out a marine survey on Carnarvon shelf (WA) in 2008 (SOL4769) to map seabed bathymetry and characterise benthic environments through colocated sampling of surface sediments and infauna, observation of benthic habitats using underwater towed video and stills photography, and measurement of ocean tides and wavegenerated currents. Data and samples were acquired using the Australian Institute of Marine Science (AIMS) Research Vessel Solander. Bathymetric mapping, sampling and video transects were completed in three survey areas that extended seaward from Ningaloo Reef to the shelf edge, including: Mandu Creek (80 sq km); Point Cloates (281 sq km), and; Gnaraloo (321 sq km). Additional bathymetric mapping (but no sampling or video) was completed between Mandu creek and Point Cloates, covering 277 sq km and north of Mandu Creek, covering 79 sq km. Two oceanographic moorings were deployed in the Point Cloates survey area. The survey also mapped and sampled an area to the northeast of the Muiron Islands covering 52 sq km. cloates_3m is an ArcINFO grid of Point Cloates of Carnarvon Shelf survey area produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software

The Surface Hydrology Points (Regional) dataset provides a set of related features classes to be used as the basis of the production of consistent hydrological information. This dataset contains a geometric representation of major hydrographic point elements - both natural and artificial. This dataset is the best available data supplied by Jurisdictions and aggregated by Geoscience Australia it is intended for defining hydrological features.

"Spot Heights. (dataset derived from the DIgital Chart of the World (DCW) HY_POINT and HS_POINT coverages). For more information on the Digital Chart of the World data please browse the DCW Internet Site <a href=""http://www.maproom.psu.edu/dcw/"">http://www.maproom.psu.edu/dcw/</a>. Data can be downloaded from here in <b>vpf format</b>. <p>NOTE : For more accurate and detailed data covering <b>continental Australia only</b> please obtain the <b><a href=""http://www.auslig.gov.au/download/"">Global Map Data 1M</a></b> <p><b>Generic information on DCW datasets :-</b> <br>The primary source for DCW is the US Defense Mapping Agency (DMA) Operational Navigation Chart (ONC) series produced by the United States, Australia, Canada, and the United Kingdom. The ONC's have a scale of 1:1,000,000, where 1 inch equals approximately 16 miles.The charts were designed to meet the needs of pilots and air crews in medium and low altitude en route navigation and to support military operational planning, intelligence briefings, and other needs. Therefore, the selection of ground features is based on the requirement for rapid visual recognition of significant details seen from a low perspective angle. The DCW database was originally published in 1992. Data currency varies from place to place depending on the currency of the ONC charts. Chart currency ranges from the mid 1960's to the early 1990's. Compilation dates for every ONC chart are included in the database."

Geoscience Australia carried out marine surveys in southeast Tasmania in 2008 and 2009 (GA0315) to map seabed bathymetry and characterise benthic environments through observation of habitats using underwater towed video. Data was acquired using the Tasmania Aquaculture and Fisheries Institute (TAFI) Research Vessel Challenger. Bathymetric mapping was undertaken in seven survey areas, including: Freycinet Pensinula (83 sq km, east coast and shelf); Tasman Peninsula (117 sq km, east coast and shelf); Port Arthur and adjacent open coast (17 sq km); The Friars (41 sq km, south of Bruny Island); lower Huon River estuary (39 sq km); D Entrecastreaux Channel (7 sq km, at Tinderbox north of Bruny Island), and; Maria Island (3 sq km, western side). Video characterisations of the seabed concentrated on areas of bedrock reef and adjacent seabed in all mapped areas, except for D Entrecastreaux Channel and Maria Island. fortescue_2m is an ArcGIS layer of the backscatter grid of the Tasman Peninsula survey arae produced from the processed EM3002 backscatter data of the survey area using the CMST-GA MB Process

"Geographic areas (dataset derived from the DIgital Chart of the World (DCW) geog coverage). For more information on the Digital Chart of the World data please browse the DCW Internet Site <a href=""http://www.maproom.psu.edu/dcw/"">http://www.maproom.psu.edu/dcw/</a>. Data can be downloaded from here in <b>vpf format</b>. <p>NOTE : For more accurate and detailed data covering <b>continental Australia only</b> please obtain the <b><a href=""http://www.auslig.gov.au/download/"">Global Map Data 1M</a></b> <p><b>Generic information on DCW datasets :-</b> <br>The primary source for DCW is the US Defense Mapping Agency (DMA) Operational Navigation Chart (ONC) series produced by the United States, Australia, Canada, and the United Kingdom. The ONC's have a scale of 1:1,000,000, where 1 inch equals approximately 16 miles.The charts were designed to meet the needs of pilots and air crews in medium and low altitude en route navigation and to support military operational planning, intelligence briefings, and other needs. Therefore, the selection of ground features is based on the requirement for rapid visual recognition of significant details seen from a low perspective angle. The DCW database was originally published in 1992. Data currency varies from place to place depending on the currency of the ONC charts. Chart currency ranges from the mid 1960's to the early 1990's. Compilation dates for every ONC chart are included in the database."

This is a polygon file, one of five within the Rockhampton Regional Council coastline, which buffers the coastline by 4 km inland. This extent was use to clip the storm tide inundation extents and to visualise each of the five distinct inundation zones. This use of this data should be carried out with the knowledge of the contained metadata and with reference to the associated report provided by Geoscience Australia with this data (Reforming Planning Processes Trial: Rockhampton 2050). A copy of this report is available from the the Geoscience Australia website (http://www.ga.gov.au/sales) or the Geoscience Australia sales office (sales@ga.gov.au, 1800 800 173).

This use of this data should be carried out with the knowledge of the contained metadata and with reference to the associated report provided by Geoscience Australia with this data (Reforming Planning Processes Trial: Rockhampton 2050). A copy of this report is available from the the Geoscience Australia website (http://www.ga.gov.au/sales) or the Geoscience Australia sales office (sales@ga.gov.au, 1800 800 173). This file identifes the storm tide inundation extent for a specific Average Recurrence Interval (ARI) event. Naming convention: SLR = Sea Level Rise s1a4 = s1 = Stage 1(extra-tropical storm tide), s2 = Stage 2 (tropical cyclone storm tide) (relating to Haigh et al. 2012 storm tide study), a4 = area 4 and a5 = area 5 2p93 = Inundation height, in this case 2.93 m Dice = this data was processed with the ESRI Dice tool.

"Hypsography as either linework or polygons. (dataset derived from the DIgital Chart of the World (DCW), either HY_ARC or HY_POLY). For more information on the Digital Chart of the World data please browse the DCW Internet Site <a href=""http://www.maproom.psu.edu/dcw/"">http://www.maproom.psu.edu/dcw/</a>. Data can be downloaded from here in <b>vpf format</b>. <p>NOTE : For more accurate and detailed data covering <b>continental Australia only</b> please obtain the <b><a href=""http://www.auslig.gov.au/download/"">Global Map Data 1M</a></b> <p><b>Generic information on DCW datasets :-</b> <br>The primary source for DCW is the US Defense Mapping Agency (DMA) Operational Navigation Chart (ONC) series produced by the United States, Australia, Canada, and the United Kingdom. The ONC's have a scale of 1:1,000,000, where 1 inch equals approximately 16 miles.The charts were designed to meet the needs of pilots and air crews in medium and low altitude en route navigation and to support military operational planning, intelligence briefings, and other needs. Therefore, the selection of ground features is based on the requirement for rapid visual recognition of significant details seen from a low perspective angle. The DCW database was originally published in 1992. Data currency varies from place to place depending on the currency of the ONC charts. Chart currency ranges from the mid 1960's to the early 1990's. Compilation dates for every ONC chart are included in the database."

This use of this data should be carried out with the knowledge of the contained metadata and with reference to the associated report provided by Geoscience Australia with this data (Reforming Planning Processes Trial: Rockhampton 2050). A copy of this report is available from the the Geoscience Australia website (http://www.ga.gov.au/sales) or the Geoscience Australia sales office (sales@ga.gov.au, 1800 800 173). This file identifes the storm tide inundation extent for a specific Average Recurrence Interval (ARI) event. Naming convention: SLR = Sea Level Rise s1a4 = s1 = Stage 1(extra-tropical storm tide), s2 = Stage 2 (tropical cyclone storm tide) (relating to Haigh et al. 2012 storm tide study), a4 = area 4 and a5 = area 5 2p93 = Inundation height, in this case 2.93 m Dice = this data was processed with the ESRI Dice tool.

Locations of RADARSAT scenes within the Australian marine region. This dataset represents all the radarsat (SAR) scenes GA (PMD) has purchased and have stored in-house. SAR stands for Synthetic Aperature Radar. RADARSAT is a Canadian satellite and scenes are from a company called RADARSAT International (RSI). GA (PMD) updates its holdings of these satellite scenes on a 6 monthly basis. Almost all scenes have been interpreted by GA and external contractors.