Digital Elevation data record the terrain height variations from the processed SRTM surface elevation 3 second grid data with a drape surface overlain. This National Gravity Compilation 2019 Ausdrape elevation geoid image (hillshade HSI) is elevation data for the 2019 Australian National Gravity Grids B series. These data are used in the project No. 202008. The grid used to produce this image has a cell size of 0.00417 degrees (approximately 435m). All data (i.e., ground, airborne and marine derived from satellite altimetry) were vertically continued to this surface during processing. The surface was generated to mimic a smooth airborne survey drape surface with a minimum surface clearance of 250 m and an isotropic maximum climb and descent rates of 25 m per km. The ground surface data were derived from SRTM data with 3 second grid cell size. The data are given in units of meters. The data are given in units of meters.

Digital Elevation data record the terrain height variations from the processed SRTM surface elevation 3 second grid data with a drape surface overlain. This National Gravity Compilation 2019 Ausdrape elevation ellipsoid image (hillshade HSI) contains the elevation of the observation surface for the 2019 Australian National Gravity Grids B series relative to the GRS80 ellipsoid (GDA94 datum). These data are used in the project No. 202008. The grid used to produce this image has a cell size of 0.00417 degrees (approximately 435m). All data (i.e., ground, airborne and marine derived from satellite altimetry) were vertically continued to this surface during processing. The surface was generated to mimic a smooth airborne survey drape surface with a minimum surface clearance of 250 m and an isotropic maximum climb and descent rates of 25 m per km. The ground surface data were derived from SRTM data with 3 second grid cell size. The data are given in units of meters.

Digital Elevation data record the terrain height variations from the processed point-located data recorded during a geophysical survey. This National Gravity Compilation 2019 ground elevation ellipsoid image (hillshade HSI) is elevation of the observation surface for the gravity data in the 2019 A Series grids relative to the GRS80 ellipsoid (GDA94 datum). These data were acquired under the project No. 202008. The ground surface data were derived from SRTM data with 3 second grid cell size. The grid used to produce this image has a cell size of 0.00417 degrees (approximately 435m). The data are given in units of meters. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose.

Digital Elevation data record the terrain height variations from the processed SRTM surface elevation 3 second grid data with a drape surface overlain. This National Gravity Compilation 2019 Ausdrape elevation ellipsoid grid contains the elevation of the observation surface for the 2019 Australian National Gravity Grids B series relative to the GRS80 ellipsoid (GDA94 datum). These data are used in the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). All data (i.e., ground, airborne and marine derived from satellite altimetry) were vertically continued to this surface during processing. The surface was generated to mimic a smooth airborne survey drape surface with a minimum surface clearance of 250 m and an isotropic maximum climb and descent rates of 25 m per km. The ground surface data were derived from SRTM data with 3 second grid cell size. The data are given in units of meters.

Digital Elevation data record the terrain height variations from the processed point-located data recorded during a geophysical survey. This National Gravity Compilation 2019 ground elevation ellipsoid grid is elevation data for the 2019 Australian National Gravity Grids A Series. These data were acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). This grid contains the ground elevation relative to the ellipsoid for the 2019 Australian National Gravity Grids A Series. It represents the vertical distance from a location on the Earth's surface to the ellipsoid. The data are given in units of meters. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose.

The Digital Elevation Model represents ground surface topography between points of known elevation. The elevation data was calculated using the altimeters and Global Positioning System (GPS) sensor used for the benefit of airborne magnetic and radiometric data on the same survey. The elevation is the height relative to the Australian Height Datum GDA94 (AUSGEOID09). The processed elevation data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. These line dataset from the Australia-Wide Airborne Geophysical Survey 2 (AWAGS2), 2007 survey were acquired in 2007 by Geoscience Australia at 75000m line spacing and 80m terrain clearance.

Digital Elevation data record the terrain height variations from the processed point- or line-located data recorded during a geophysical survey. This Gawler Craton Airborne Survey Merge Digital Elevation Model - ground elevation geoid image is elevation data for the Gawler Craton Airborne Survey Magnetic Radiometric and DEM Merge, SA, 2017-2019 relative to the geoid vertical datum. These data were acquired during project No. 5000 for the geological survey of SA, and consisted of 1660000 line-kilometres of data at 200m line spacing and 60m terrain clearance. The grid used to produce this image has a cell size of 0.0004 degrees (approximately 41m) and contains the ground elevation relative to the geoid for the Gawler Craton Airborne Survey Magnetic Radiometric and DEM Merge, SA, 2017-2019. It represents the vertical distance from a location on the Earth's surface to the geoid. The data are given in units of meters. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose.

Digital Elevation data record the terrain height variations from the processed point- or line-located data recorded during a geophysical survey. This Frome elevation grid geodetic is elevation data for the Frome, SA, Broken Hill Exploration Initiative, 1995. This survey was acquired under the project No. 641 for the geological survey of SA. The grid has a cell size of 0.00083 degrees (approximately 86m). This grid contains the ground elevation relative to the geoid for the Frome, SA, Broken Hill Exploration Initiative, 1995. It represents the vertical distance from a location on the Earth's surface to the geoid. The data are given in units of meters. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose.

Digital Elevation data record the terrain height variations from the processed point- or line-located data recorded during a geophysical survey. This GSWA Naretha Eucla Basin 3 Elevation Grid Geodetic is elevation data for the Naretha, WA, 2009 (Eucla Basin 3). This survey was acquired under the project No. 1210 for the geological survey of WA. The grid has a cell size of 0.00042 degrees (approximately 43m). This grid contains the ground elevation relative to the geoid for the Naretha, WA, 2009 (Eucla Basin 3). It represents the vertical distance from a location on the Earth's surface to the geoid. The data are given in units of meters. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose.

The Digital Elevation Model represents ground surface topography between points of known elevation. The elevation data was calculated using the altimeters and Global Positioning System (GPS) sensor used for the benefit of airborne magnetic and radiometric data on the same survey. The elevation is the height relative to the Australian Height Datum GDA94 (AUSGEOID09). The processed elevation data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. These line dataset from the Naretha, WA, 2009 (Eucla Basin 3) survey were acquired in 2009 by the WA Government, and consisted of 124870 line-kilometres of data at 200m line spacing and 50m terrain clearance.