This service represents a combination of two data products, the DEM_SRTM_1Second dataset and the Australian_Bathymetry_Topography dataset. This service was created to support the CO2SAP (Co2 Storage application) Project to create a transect elevation graph within the application. This data is not available as a dataset for download as a Geoscience Australia product. The DEM_SRTM_1Second service represents the National Digital Elevation Model (DEM) 1 Second product derived from the National DEM SRTM 1 Second. The DEM represents ground surface topography, with vegetation features removed using an automatic process supported by several vegetation maps. eCat record 72759. The Australian_Bathymetry_Topography service describes the bathymetry dataset of the Australian Exclusive Economic Zone and beyond. Bathymetry data was compiled by Geoscience Australia from multibeam and single beam data (derived from multiple sources), Australian Hydrographic Service (AHS) Laser Airborne Depth Sounding (LADS) data, Royal Australian Navy (RAN) fairsheets, the General Bathymetric Chart of the Oceans (GEBCO) bathymetric model, the 2 arc minute ETOPO (Smith and Sandwell, 1997) and 1 arc minute ETOPO satellite derived bathymetry (Amante and Eakins, 2008). Topographic data (onshore data) is based on the revised Australian 0.0025dd topography grid (Geoscience Australia, 2008), the 0.0025dd New Zealand topography grid (Geographx, 2008) and the 90m SRTM DEM (Jarvis et al, 2008). eCat record 67703. IMPORTANT INFORMATION For data within this service that lays out of the Australian boundary the following needs to be considered. This grid is not suitable for use as an aid to navigation, or to replace any products produced by the Australian Hydrographic Service. Geoscience Australia produces the 0.0025dd bathymetric grid of Australia specifically to provide regional and local broad scale context for scientific and industry projects, and public education. The 0.0025dd grid size is, in many regions of this grid, far in excess of the optimal grid size for some of the input data used. On parts of the continental shelf it may be possible to produce grids at higher resolution, especially where LADS or multibeam surveys exist. However these surveys typically only cover small areas and hence do not warrant the production of a regional scale grid at less than 0.0025dd. There are a number of bathymetric datasets that have not been included in this grid for various reasons.

Poster describing how GA made the WASANT palaeovalley map (GEOCAT #73980).

No abstract available

No abstract available

No abstract available

22-1/G54-14/19 Contour interval: 2

Moreton Bay 2009 LiDAR data was captured over the Moreton Bay Regional Council area between March and June 2009. The data was acquired by AAM Hatch (now AAMGroup) and funded by Queensland and Commonwealth governments. The project area covering 2440sqkm is licenced for use by all Commonwealth, State and Local Government organisations. Data acquisition and post-processing has been controlled to achieve a vertical accuracy witihn 0.15m (RMS, 68% CI) and horizontal accuracy within 0.45 m. Horizontal coordinates are based upon Map Grid of Australia (MGA) Zone 56 projection. Vertical coordinates are referenced to Australian Height Datum (AHD). The data was captured with point density of 2.5 points per square metre and the data is available as mass point files (ASCII, LAS) and ESRI GRID files with 1m grid spacing in 1km tiles.

No abstract available

AAM Hatch was engaged by Geoscience Australia to undertake a LiDAR survey over the BHMAR Phase 2 prject area, for the purpose of producing a DTM and vegetation structure analysis. The survey covers an area of approximately 7856 sqkm of the Lower Darling River, downstream from Wilcannia. LiDAR was acquired from a fixed wing aircraft between 19 June 2009 and 5 August 2009 with a vertical accuracy of 0.15m and horizontal accuracy of 0.25m in coordinated system GDA 94, MGA Zone 54 and vertical datum of AHD. File formats included las format and 1m DTM ESRI Grids in ArcGIS binary grid format. Producing a DTM and vegetation structure analysis for the BHMAR Phase 2 Project area for groundwater monitoring.

non standard coverage 22-1/H56-13/19 Contour interval: 10