This South Australian Gulf and Yorke Cenozoic Basins dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The South Australian Gulf and Yorke Cenozoic basins consist of eleven separate basins with similar sediments. These relatively small to moderate-sized basins overlies older rocks from the Permian, Cambrian, or Precambrian periods and are often bounded by north-trending faults or basement highs. The largest basins, Torrens, Pirie, and Saint Vincent, share boundaries. The Torrens and Pirie basins are fault-bounded structural depressions linked to the Torrens Hinge Zone, while the Saint Vincent basin is a fault-bounded intra-cratonic graben. Smaller isolated basins include Carribie and Para Wurlie near the Yorke Peninsula, and Willochra and Walloway in the southern Flinders Ranges. The Barossa Basin, Hindmarsh Tiers, Myponga, and Meadows basins are in the Adelaide region. These basins resulted from tectonic movements during the Eocene Australian-Antarctic separation, with many forming in the late Oligocene. Sediment deposition occurred during the Oligocene to Holocene, with various environments influenced by marine transgressions and regressions. The well-studied Saint Vincent Basin contains diverse sediments deposited in fluvial, alluvial, deltaic, swamp, marine, littoral, beach, and colluvial settings, with over 30 major shoreline migrations. Eocene deposition formed fluvio-deltaic lignite and sand deposits, before transitioning to deeper marine settings. The Oligocene and Miocene saw limestone, calcarenite, and clay deposition, overlain by Pliocene marine sands and limestones. The uppermost sequences include interbedded Pliocene to Pleistocene limestone, sand, gravel, and clay, as well as Pleistocene clay with minor sand lenses, and Holocene to modern coastal deposits. The sediment thickness varies from less than 50 m to approximately 600 m, with the Saint Vincent Basin having the most substantial infill. Some basins were previously connected to the Saint Vincent Basin's marine depositional systems but later separated due to tectonic movements.

This Carnarvon Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Carnarvon Basin is a large sedimentary basin covering the western and north-western coast of Western Australia, stretching over 1,000 km from Geraldton to Karratha. It is predominantly offshore, with over 80% of the basin located in water depths of up to 4,500 m. The basin is elongated north to south and connects to the Perth Basin in the south and the offshore Canning Basin in the north-east. It is underlain by Precambrian crystalline basement rocks. The Carnarvon Basin consists of two distinct parts. The southern portion comprises onshore sub-basins with mainly Paleozoic sedimentary rocks extending up to 300 km inland, while the northern section consists of offshore sub-basins containing Mesozoic, Cenozoic, and Paleozoic sequences. The geological evolution of the Southern Carnarvon Basin was shaped by multiple extensional episodes related to the breakup of Gondwana and reactivation of Archean and Proterozoic structures. The collision between Australia and Eurasia in the Mid-Miocene caused significant fault reactivation and inversion. The onshore region experienced arid conditions, leading to the formation of calcrete, followed by alluvial and eolian deposition and continued calcareous deposition offshore. The Northern Carnarvon Basin contains up to 15,000 m of sedimentary infill, primarily composed of siliciclastic deltaic to marine sediments from the Triassic to Early Cretaceous and shelf carbonates from the Mid-Cretaceous to Cenozoic. The basin is a significant hydrocarbon province, with most of the resources found within Upper Triassic, Jurassic, and Lower Cretaceous sandstone reservoirs. The basin's development occurred during four successive periods of extension and thermal subsidence, resulting in the formation of various sub-basins and structural highs. Overall, the Carnarvon Basin is a geologically complex region with a rich sedimentary history and significant hydrocarbon resources. Exploration drilling has been ongoing since 1953, with numerous wells drilled to unlock its hydrocarbon potential.

The upper Permian to Lower Triassic sedimentary succession in the southern Bonaparte Basin represents an extensive marginal marine depositional system that hosts several gas accumulations. Of these, the Blacktip gas field has been in production since 2009, while additional identified gas resources are under consideration for development. The sedimentary succession extends across the Permian–Triassic stratigraphic boundary, and shows a change in lithofacies changes from the carbonate dominated Dombey Formation to the siliciclastic dominated Tern and Penguin formations. The timing, duration, distribution and depositional environments of these formations in the Petrel Sub-basin and Londonderry High is the focus of this study. The sedimentary succession extending from the Dombey to the Penguin formations is interpreted to represent marginal marine facies which accumulated during a long-lasting marine transgression that extended over previous coastal and alluvial plain sediments of the Cape Hay Formation. The overlying Mairmull Formation represents the transition fully to marine deposition in the Early Triassic. Regional scale well correlations and an assessment of available biostratigraphic data suggest marginal marine deposition systems were initiated outboard before the End Permian Extinction event, subsequently migrated inboard at about the Permian–Triassic stratigraphic boundary, and continued to be deposited through the faunal and floral recovery phase as Triassic species became established. The depositional history of the basin is translated to a chronostratigraphic framework which has implications for predicting the character and distribution of petroleum system elements in the Petrel Sub-basin and Londonderry High. Appeared in The APPEA Journal 61(2) 699-706, 2 July 2021

Discusses requirements of a stratigraphic unit definition and why geoscientists should write more of them, where to research background information, where to get advice, and what standards apply.

Discussion of the uses made of the Australian Stratigraphic units database (ASUD), the sources of data to update it, and issues with maintaining quality. The importance of correct and consistent terminology, and the value of good reviews and editing are highlighted with examples.

Discussion of available stratigraphic resources: the Australian Stratigraphic Units Database (ASUD); documentation of procedures for modifying existing units or establishing new ones; contact details for the Australian Stratigraphy Commission members and ASUD staff. Suggestions on ways of raising awareness through modern media such as a podcast or app, and a request for feedback on what sort of approach might appeal to a university student audience.

Exploring for the Future (EFTF) is an Australian Government program led by Geoscience Australia, in partnership with state and Northern Territory governments. The first phase of the EFTF program (2016-2020) aimed to drive industry investment in resource exploration in frontier regions of northern Australia by providing new precompetitive data and information about their energy, mineral and groundwater resource potential. One of the key discoveries of the first phase of the Exploring for the Future program was the identification of a large sedimentary depocentre in the South Nicholson region, an underexplored area straddling north-eastern Northern Territory and north-western Queensland. This depocentre, up to 8 km deep, was termed the ‘Carrara Sub-basin’ by Geoscience Australia. It is interpreted to contain thick sequences of Proterozoic rocks, broadly equivalent to rocks of the greater McArthur Basin (Northern Territory) and northern Lawn Hill Platform and Mount Isa Province (Queensland), known to be highly prospective for sediment-hosted base metals and unconventional hydrocarbons. In order to gain insights into the resource potential of the Carrara Sub-basin, the South Nicholson National Drilling Initiative (NDI) Carrara 1 stratigraphic drillhole was completed in late 2020, as a collaboration between Geoscience Australia, the Northern Territory Geological Survey (NTGS) and the MinEx CRC . NDI Carrara 1 is the first drillhole to intersect the, as yet, undifferentiated Proterozoic rocks of the Carrara Sub-Basin. NDI Carrara 1 is located on the western flanks of the Carrara Sub-basin on the South Nicholson Seismic line (17GA-SN1), reaching a total depth of 1751 mGL, intersecting ca. 630 m of Cambrian Georgina Basin overlying ca. 1100 m of Proterozoic carbonates, black shales and minor siliciclastics . Geoscience Australia is undertaking a range of investigations on the lithology, stratigraphy and geotechnical properties of NDI Carrara 1 based on wireline data, as well as undertaking a range of analyses of over 400 physical samples recovered through the entire core. This report presents new data from bulk density measurements carried out on selected rock samples as part of this comprehensive analytical program.

NDI Carrara 1 is a deep stratigraphic drill hole completed in 2020 as part of the MinEx CRC National Drilling Initiative (NDI) in collaboration with Geoscience Australia and the Northern Territory Geological Survey. It is the first test of the Carrara Sub-Basin, a depocentre newly discovered in the South Nicholson region based on interpretation from seismic surveys (L210 in 2017 and L212 in 2019) recently acquired as part of the Exploring for the Future program. The drill hole intersected approximately 1100 m of Proterozoic sedimentary rocks uncomformably overlain by 630 m of Cambrian Georgina Basin carbonates. A comprehensive geochemical program designed to provide information about the region’s resource potential was carried out on samples collected at up to 4 meter intervals. This report presents part 1 of the data from Rock-Eval pyrolysis analyses undertaken by Geoscience Australia on selected rock samples to establish their total organic carbon content, hydrocarbon-generating potential and thermal maturity.

This Murray Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Murray Basin, a significant sedimentary basin in Australia, displays varying sediment thickness across its expanse, with the thickest layers concentrated in its central regions. The basin's geological evolution is characterised by distinct depositional phases. During the Paleocene to Eocene Renmark Group phase, sedimentary deposits encompass fluvial sands at the base, transitioning into paralic carbonaceous clay and lignite layers. These sediments indicate the shift from riverine to shallow marine environments, dating back to the Paleocene and Eocene periods. The Oligocene to Middle Miocene period encompasses the Ettrick Formation and Murray Group Limestone. The former includes marl, and the latter displays glauconitic grey-green marl and bryozoal limestone, revealing prevailing marine conditions during the Oligocene to Middle Miocene. In the Late Miocene to Early Pliocene Bookpurnong Formation, marine shelly dark grey clay and silt, previously known as the Bookpurnong Beds, coexist with Pliocene fluvial to marginal marine quartz sands (Loxton Sands), marking the transition back to terrestrial and nearshore marine settings. During the Late Pliocene to Pleistocene, the Blanchetown Clay, a substantial unit within Lake Bungunnia, signifies lacustrine phases. Overlying ferricretes in the central/eastern basin and the Norwest Bend Formation's oyster coquinas in the western region, the clay exhibits variable coloration and laminations. Lastly, the Pleistocene to Holocene phase witnesses river-induced reworking and erosion of underlying sediments, giving rise to the Shepparton and Coonambidgal formations. In the western Murray Basin, Cenozoic sedimentary rocks are relatively thin, typically measuring under 200-300 meters. The Renmark Trough area presents a maximum thickness of 600 meters.

This Georgina Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Georgina Basin is a large intra-cratonic sedimentary basin in central Australia that has undergone several deformation events throughout its geological history. Its deposition began during the Neoproterozoic due to the breakup and erosion of the Rodinia Supercontinent, resulting in the broader Centralian Superbasin, encompassing the Amadeus, Georgina, Ngalia, Officer, and Savory basins. The basin's initial formation occurred as a north-west trending extensional structure in its southern part, containing thick sequences preserved in structural depo-centres such as the Toko Syncline, Dulcie Syncline, and Burke River Structural Zone. The basin unconformably overlies Proterozoic basement rocks, with its eastern boundary onlapping the Mesoproterozoic Mount Isa Province. The Georgina Basin is connected to the Daly and Wiso basins by early to middle Cambrian seaways in some areas, while in others, they are separated by basement highs like the Tomkinson, Warramunga, and Davenport provinces. The northern Georgina Basin is overlain by Mesozoic rocks of the Carpentaria Basin, and the southern basin is covered by Cenozoic deposits. The stratigraphy and rock types within the Georgina Basin include Neoproterozoic rock units in the southern parts correlated with the Centralian Superbasin, characterized by dolostone, tillite, sandstone, quartzite, siltstone, conglomerate, and shale. The basin's structure has been moderately deformed by folding and faulting, with the most significant deformation in its southern part related to the Ordovician to Carboniferous Alice Springs Orogeny. The basin's development occurred in several stages, including Neoproterozoic rifting and subsidence, tectonic activity during the Petermann Orogeny, Early Cambrian rifting, Middle to late Cambrian foreland loading and deposition, Early Ordovician minor rifting, transpression during the Alice Springs Orogeny, and a final phase of synorogenic siliclastic sedimentation in a foreland basin setting, is limited to southern depo-centres. Overall, the Georgina Basin's complex geological history has resulted in a diverse array of sedimentary rocks and structural features, making it a significant area of interest for geological studies and resource exploration in central Australia.