The Casey Station Bathymetry Survey was conducted last summer from December 2014 to February 2015. This collaborative survey was undertaken by Geoscience Australia, the Royal Australian Navy and the Australian Antarctic Division, using the AAD's workboat the RV Howard Burton. The survey goal was to acquire high resolution bathymetry data to improve our understanding of the seafloor using multibeam sonar. The bathymetry data collection will be supplemented by physical sampling of the seafloor sediments and video recordings of the biological communities living in the seafloor. The survey will cover areas that haven't been charted during the 2013 Casey Survey and are frequently used by the RSV Aurora Australis. Improving our understanding of the seabed environment in these shallow coastal waters will ultimately lead to a better environmental management of the Australian Antarctic Territory. The data will also help the RAN to develop more accurate navigation charts therefore reducing the risk to maritime operation in the region.

The remote Eastern frontiers project aimed to provide a geological and petroleum prospectivity assessement of the Faust Capel Basins. Funded through Australian Governement Initiatives (Energy Security Program). The Faust Capel Basins survey GA-2436/ TAN0713 was acquired by Geoscience Australia onboard the RV Tangaroa (operated by NIWA) from the 6th of October to the 22nd of November 2007. The geographic range stretched from Wellington to the Faust Capel Basins to Lord Howe Island and back to Wellington. Approximately 8,945 sailing km of multibeam bathymetry was acquired. The high resolution bathymetry data imaged seafloor features in unprecedented detail, revealing the effects of recent magmatic activity and fluid migration on the seafloor. It also produced a new image of a flat topped unexplored seamount. A member of the Lord Howe Rise seamount chain.<p><p>This dataset is not to be used for navigational purposes.

The Petrel Sub-basin Marine Environmental Survey GA-0335 was acquired by the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between Geoscience Australia and the Australian Institute of Marine Science (AIMS) . The purpose was to acquire geophysical and biophysical data on shallow (less than 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas.<p><p>This dataset is not to be used for navigational purposes.

The NSW Continental Slopes survey GA-2413, SS10/2006 was acquired by Geoscience australia onboard the RV Southern Surveyor from the 12th of October to the 25th of October 2006. The geographical range stretched from Jervis bay in the South to Port Stephens in the North. The aim was to assess the physical nature of the NSW continental slope, improve our understanding of the surface and subsurface structure of the continental slope and to investigate the history of sediment movement along the continental slope.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia conducted a marine survey to provide seabed environmental information to support the assessment of the CO2 storage potential of the Vlaming Sub-Basin. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2. The major aim of this survey was to look for evidence of any gas fluid seepage at the seabed and wether the location had faults that have been identified in a number of seismic lines. The survey also mapped seabed biota in the area of interest to indentify any biota communities that are related with seepage. This research addresses key questions of the regional seal integrity of the Southern Perth Shale and the potential for storing of CO2 in the Early Cretaceous Gage Sandstone. The survey was conducted by Fugro's Southern Supporter in the Vlaming Sub-Basin, North and South of Rotnest Island between the period of the 17th of March to the 20th of April 2012. Shallow seismic sub bottom profiler data were acquired as well as high resolution multibeam bathymetry and backscatter data during the survey. This dataset is not to be used for navigational purposes.<p><p>This dataset is not to be used for navigational purposes.

The EM300 Sea Trials survey GA-2354, was acquired by Geoscience Australia after the installation of the new multibeam bathymetry acquisition system EM300 onboard the RV Southern Survey during the 16 to 18th of December 2003. The survey location was offshore Fremantle around the Perth Canyon. The aim of the survey was to test the bathymetry system installed on the vessel. The bathymetry grids consists of 10 and 40m resolution grids projected in Easting and Northing WGS84 UTM 50S.<p><p>This dataset is not to be used for navigational purposes.

The Petrel Sub-basin CO2 storage 2D seismic survey GA-0336, was acquired by the MV Duke in the Bonaparte Bay, NW Australia for Geoscience Australia between the the 3rd of May to the 24th of June 2012. This survey was part of the Australian government's National Low emission Coal Initiative (NLECI).The purpose was to acquire geophysical data on shallow water (less than 120m water depth) in the Petrel sub-basin to support investigation for CO2 storage potential in the area. Multibeam bathymetry data was acquired by the vessel at the same time as the seismic data. This bathymetry dataset consist of the high resolution bathymetry grids (2m) of all the swath data acquired by the MV Duke.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia undertook a marine survey of the Leveque Shelf (survey number (GA-0340/SOL5754), a sub-basin of the Browse Basin, in May 2013. This survey provides seabed and shallow geological information to support an assessment of the CO2 storage potential of the Browse sedimentary basin. The basin, located on the Northwest Shelf, Western Australia, was previously identified by the Carbon Storage Taskforce (2009) as potentially suitable for CO2 storage. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2 within reasonable distances of major sources of CO2 emissions. The principal aim of the Leveque Shelf marine survey was to look for evidence of any past or current gas or fluid seepage at the seabed, and to determine whether these features are related to structures (e.g. faults) in the Leveque Shelf area that may extend to the seabed. The survey also mapped seabed habitats and biota to provide information on communities and biophysical features that may be associated with seepage. This research, combined with deeper geological studies undertaken concurrently, addresses key questions on the potential for containment of CO2 in the basin's proposed CO2 storage unit, i.e. the basal sedimentary section (Late Jurassic and Early Cretaceous), and the regional integrity of the Jamieson Formation (the seal unit overlying the main reservoir).

Geoscience Australia conducted a marine survey (GA-0345 andGA-0346 /TAN1411) in Commonwealth waters of the north-eastern Browse Basin (Caswell Sub-basin) between 9 October and 9 November 2014. The purpose of the survey was to collect pre-competitive marine data to support a CO2 storage assessment in the Browse Basin, with particular emphasis on the integrity of seals overlying select CO2 storage plays. Data acquisition was undertaken as part of the National CO2 Infrastructure Plan (NCIP), administered by the Department of Industry and Science. The survey was conducted in 3 Legs aboard the New Geoscience Australia (GA) conducted a marine survey (GA0345/GA0346/TAN1411) of the north-eastern Browse Basin (Caswell Sub-basin) between 9 October and 9 November 2014 to acquire seabed and shallow geological information to support an assessment of the CO2 storage potential of the basin. The survey, undertaken as part of the Department of Industry and Science's National CO2 Infrastructure Plan (NCIP), aimed to identify and characterise indicators of natural hydrocarbon or fluid seepage that may indicate compromised seal integrity in the region. The survey was conducted in three legs aboard the New Zealand research vessel RV Tangaroa, and included scientists and technical staff from GA, the NZ National Institute of Water and Atmospheric Research Ltd. (NIWA) and Fugro Survey Pty Ltd. Shipboard data (survey ID GA0345) collected included multibeam sonar bathymetry and backscatter over 12 areas (A1, A2, A3, A4, A6b, A7, A8, B1, C1, C2b, F1, M1) totalling 455 km2 in water depths ranging from 90 - 430 m, and 611 km of sub-bottom profile lines. Seabed samples were collected from 48 stations and included 99 Smith-McIntyre grabs and 41 piston cores. An Autonomous Underwater Vehicle (AUV) (survey ID GA0346) collected higher-resolution multibeam sonar bathymetry and backscatter data, totalling 7.7 km2, along with 71 line km of side scan sonar, underwater camera and sub-bottom profile data. Twenty two Remotely Operated Vehicle (ROV) missions collected 31 hours of underwater video, 657 still images, eight grabs and one core. This catalogue entry refers to bathymetry data acquired during survey GA0345/GA0346/TAN1411.

This dataset contains the processed bathymetric dataset from the Lord Howe and Lord How Island survey area held by Geoscience Australia. This dataset includes multibeam echosounder data and was gridded at 50m resolution of the Lord Howe survey area and a 10m resolution of Lord Howe Island, based on the optimal resolution for the depth range encountered. The objective of the survey on the Lord Howe Island shelf (NSW) in 2008 (SS062008) was to map seabed bathymetry and characterise benthic environments through co-located sampling of surface sediments and infauna, rock coring, observation of benthic habitats using underwater towed video, and measurement of ocean tides and wavegenerated currents. Subbottom profile data was also collected to map sediment thickness and shelf stratigraphy. Data and samples were acquired using the National Facility Research Vessel Southern Surveyor. This dataset is published with the permission of the CEO, Geoscience Australia. Not to be used for navigational purposes.