60 second video announcing Digital Earth Australia - a world first analysis platform for satellite imagery and other Earth observations.

Analysis Ready Data (ARD) are satellite data that have been pre-processed for immediate analysis with minimal user effort. The generation of Surface Reflectance (SR) from optical satellite data, involves a series of corrections to standardise the data and enable meaningful comparison of data from multiple sensors and across time. Surface reflectance data are foundational for time-series analyses and rapid generation of other information products. Field based validation of surface reflectance data is therefore critical to determine its fitness for purpose, and applicability for downstream product development. In this paper, an approach for continental scale validation of the surface reflectance data from Landsat-8 and Sentinel-2 satellites, using field-based measurements that are near-synchronous to the satellite observations over multiple sites across Australia is presented. Good practice measurement protocols governing the acquisition of field data, including field instrument calibration, sampling strategy and approach for post-collection processing and management of field spectral data are outlined. This study has been a nationally coordinated, collaborative field data collection campaign across Australia. Permanent field sites, to support validation efforts within the broader Earth Observation (EO) community for continental scale products were also identified. The approach is expected to serve as a model for coordinated ongoing validation of ARD products at continental to global scales. Presented at the 2019 IEEE International Geoscience and Remote Sensing Symposium (IGARSS)

CEOS Analysis Ready Data for Land (CARD4L) are satellite data that have been processed to a minimum set of requirements and organized into a form that allows immediate analysis with a minimum of additional user effort and interoperability both through time and with other datasets [1]. In this paper, key input data (e.g. aerosol optical depth, precipitable water, BRDF parameters) needed for atmospheric and BRDF corrections of Landsat data are identified and a sensitivity analysis is conducted using outputs of a physics based atmospheric and BRDF model. The results show that aerosol impacts more on the visible bands where the average variation of reflectance could reach 0.05 of reflectance unit. The variation over dark targets can be much higher so that it is a critical parameter for aquatic applications. By contrast, precipitable water (water vapor in the rest of the paper) only impacts the near-infrared (NIR) and shortwave (SWIR) bands and the extent of change is much smaller. BRDF parameters impact time series most on winter and summer images of highly anisotropic areas and when they are normalized to 45º solar angle. Different BRDF levels for different spectrum ranges not only impact the magnitude of reflectance, but also the signature for these areas. It seems that it is necessary to normalize surface BRDF to ensure time series consistency of the Landsat ARD product. Abstract presented at 2019 IEEE International Geoscience and Remote Sensing Symposium (IGARSS)

<div>The United States Geological Survey's (USGS) Landsat satellite program has been capturing images of the Australian continent for more than 30 years. This data is highly useful for land and coastal mapping studies.</div><div><br></div><div>In particular, the light reflected from the Earth’s surface (surface reflectance) is important for monitoring environmental resources – such as agricultural production and mining activities – over time.</div><div><br></div><div>We make accurate comparisons of imagery acquired at different times, seasons and geographic locations. However, inconsistencies can arise due to variations in atmospheric conditions, sun position, sensor view angle, surface slope and surface aspect. These are reduced or removed to ensure the data is consistent and can be compared over time.</div><div><br></div><div>The Geoscience Australia Landsat 9 OLI TIRS Analysis Ready Data Collection 3 contains three sub-products that provide corrections or attribution information:</div><div>- DEA Surface Reflectance NBAR* (Landsat 9)</div><div>- DEA Surface Reflectance NBART** (Landsat 9)</div><div>- DEA Surface Reflectance OA*** (Landsat 9)</div><div><br></div><div>Note: DEA produces NBAR as part of the Landsat ARD, this is available in the National Computing Infrastructure environment only and is not available in the DEA cloud environments.</div><div><br></div><div>The resolution is a 30 m grid based on the USGS Landsat Collection 2 archive, or 15 m for the panchromatic band. This data forms part of the DEA Collection 3 archive. </div><div><br></div><div>* Nadir corrected Bi-directional reflectance distribution function Adjusted Reflectance (NBAR)</div><div>** Nadir corrected Bi-directional reflectance distribution function Adjusted Reflectance with terrain illumination correction (NBART)</div><div>*** Observation Attributes (OA)</div>

Up to date information about the extent and location of surface water provides all Australians with a common understanding of this valuable and increasingly scarce resource. Digital Earth Australia (DEA) Waterbodies shows the wet surface area of waterbodies as estimated from satellites. It does not show depth, volume, purpose of the waterbody, nor the source of the water. DEA Waterbodies uses Geoscience Australia’s archive of over 30 years of Landsat satellite imagery to identify where over 300,000 waterbodies are in the Australian landscape and tells us the wet surface area within those waterbodies. It supports users to understand and manage water across Australia. For example, users can gain insights into the severity and spatial distribution of drought or identify potential water sources for aerial firefighting. The tool uses a water classification for every available Landsat satellite image and maps the locations of waterbodies across Australia. It provides a timeseries of wet surface area for waterbodies that are present more than 10% of the time and are larger than 2700m2 (3 Landsat pixels). The tool indicates changes in the wet surface area of waterbodies. This can be used to identify when waterbodies are increasing or decreasing in wet surface area. More information on using this dataset can be accessed on the DEA Knowledge Hub at <a href="https://docs.dea.ga.gov.au/data/product/dea-waterbodies-landsat/?tab=overview">https://docs.dea.ga.gov.au/data/product/dea-waterbodies-landsat/?tab=overview</a>. Refer to the research paper Krause et al. 2021 for additional details: <a href="https://doi.org/10.3390/rs13081437">https://doi.org/10.3390/rs13081437</a> The update from version 2 to version 3.0 of the DEA Waterbodies product and service was created through a collaboration between Geoscience Australia, the National Aerial Firefighting Centre, Natural Hazards Research Australia, and FrontierSI to make the product more useful in hazard applications. Geoscience Australia, the National Aerial Firefighting Centre, Natural Hazards Research Australia, and FrontierSI advise that the information published by this service comprises general statements based on scientific research. The reader is advised and needs to be aware that such information may be incomplete or unable to be used in any specific situation. No reliance or actions must therefore be made on that information without seeking prior expert professional, scientific and technical advice. To the extent permitted by law, FrontierSI, Geoscience Australia, the National Aerial Firefighting Centre and Natural Hazards Research Australia (including its employees and consultants) are excluded from all liability to any person for any consequences, including but not limited to all losses, damages, costs, expenses and any other compensation, arising directly or indirectly from using this publication (in part or in whole) and any information or material contained in it.