The Foundation Facility Point product contains five facility types, Private Hospitals, Public Hospitals, Aged Care Facilities, Educational Facilities and Emergency Management Facilities. The Foundation Facility Point Database presents the spatial location; in point format, of publicly available data. Facility Points are derived from various sources and consistency is mixed across Australia.

This web service provides access to the Foundation Facilities Points dataset. This contains the spatial location of publicly available data showing private and public hospitals, aged care facilities, education facilities and emergency management facilities.

From June 23rd to November 4th 2016 Geotech Ltd. carried out a helicopter-borne geophysical survey over part of East Isa in Queensland (figure 1). Operations were based at Cloncurry, Queensland. The traverse lines were flown in an east to west (N 90° E azimuth) direction with 2km and 2.5km traverse line spacings, with three Tie lines flown perpendicular to the traverse lines. During the survey the helicopter was maintained at a mean altitude of 76 metres above the ground with an average survey speed of 90 km/hour. This allowed for an actual average EM Transmitter-receiver loop terrain clearance of 38 metres and a magnetic sensor clearance of 68 metres. The principal geophysical sensors included a versatile time domain electromagnetic (VTEMTMPlus) full receiver-waveform system, and a caesium magnetometer. Ancillary equipment included a GPS navigation system, laser and radar altimeters, and inclinometer. A total of 15697 line-kilometres of geophysical data were acquired during the survey. The electromagnetic system is a Geotech Time Domain EM (VTEMplus) with full receiver-waveform streamed data recording at 192 kHz. The "full waveform VTEM system" uses the streamed half-cycle recording of transmitter current and receiver voltage waveforms to obtain a complete system response calibration throughout the entire survey flight. The VTEM transmitter loop and Z-component receiver coils are in a concentric-coplanar configuration and their axes are nominally vertical. An X-component receiver coil is also installed in the centre of the transmitter loop, with its axis nominally horizontal and in the flight line direction. The receiver coils measure the dB/dt response, and a B-Field response is calculated during the data processing. In-field data quality assurance and preliminary processing were carried out on a daily basis during the acquisition phase. Preliminary and final data processing, including generation of final digital data products were undertaken from the office of Geotech Ltd. in Aurora, Ontario. A set of Conductivity Depth Images (CDI) were generated using EM Flow version 3.3, developed by Encom Technologies Pty Ltd. A total of forty-five (45) dB/dt Z component channels, starting from channel 4 (21 µsec) to channel 48 (10667 µsec), were used for the CDI calculation. An averaged waveform at the receiver was used for the calculation since it was consistent for the majority of the flights with minor deviation from the average. Digital data includes all electromagnetic and magnetic data, conductivity imaging products, mulitplots plus ancillary data including the waveform.

This web service provides access to the Foundation Facilities Points dataset. This contains the spatial location of publicly available data showing private and public hospitals, aged care facilities, education facilities and emergency management facilities.

This web service provides access to the Foundation Facilities Points dataset. This contains the spatial location of publicly available data showing private and public hospitals, aged care facilities, education facilities and emergency management facilities.