CEOS Analysis Ready Data for Land (CARD4L) are satellite data that have been processed to a minimum set of requirements and organized into a form that allows immediate analysis with a minimum of additional user effort and interoperability both through time and with other datasets [1]. In this paper, key input data (e.g. aerosol optical depth, precipitable water, BRDF parameters) needed for atmospheric and BRDF corrections of Landsat data are identified and a sensitivity analysis is conducted using outputs of a physics based atmospheric and BRDF model. The results show that aerosol impacts more on the visible bands where the average variation of reflectance could reach 0.05 of reflectance unit. The variation over dark targets can be much higher so that it is a critical parameter for aquatic applications. By contrast, precipitable water (water vapor in the rest of the paper) only impacts the near-infrared (NIR) and shortwave (SWIR) bands and the extent of change is much smaller. BRDF parameters impact time series most on winter and summer images of highly anisotropic areas and when they are normalized to 45º solar angle. Different BRDF levels for different spectrum ranges not only impact the magnitude of reflectance, but also the signature for these areas. It seems that it is necessary to normalize surface BRDF to ensure time series consistency of the Landsat ARD product. Abstract presented at 2019 IEEE International Geoscience and Remote Sensing Symposium (IGARSS)

The National Spectral Database (NSD) houses data from Australian remote sensing scientists. The database includes spectra covering targets as diverse as mineralogy, soils, plants, water bodies and various land surfaces. Currently the database holds spectral information from multiple locations across the country and as the collection grows in spatial / temporal coverage, the NSD will service continental scale validation requirements of the Earth observation community for satellite-based measurements of surface reflectance. <b>Value:</b> Curated spectral data provides a wealth of knowledge to remote sensing scientists. For other parties interested in calibration and validation (Cal/Val) of surface reflectance products, the Geoscience Australia (GA) Cal/Val dataset provides a useful resource of ground-truth data to compare to reflectance captured by Landsat 8 and Sentinel 2 satellites. The Aquatic Library is a robust collection of Australian datasets from 1994 to present time, primarily of end-member and substratum measurements. The University of Wollongong collection represents immense value in end-member studies, both terrestrial and aquatic. <b>Scope:</b> The NSD covers Australian data including historical datasets as old as 1994. Physical study sites encompass locations around Australia, with spectra captured in every state. <b>Data types:</b> - Spectral data: raw digital numbers (DN), radiance and reflectance.  - From spectral bands VIS-NIR, SWIR1 & SWIR2: wavelengths 350nm - 2500nm collected with instruments in the field or lab setting. Contact for further information: NSDB_manager@ga.gov.au

The National Spectral Database (NSD) houses data taken by Australian remote sensing scientists. The database includes spectra covering targets as diverse as mineralogy, soils, plants, water bodies and various land surfaces.<br /> Currently the database holds spectral information from multiple locations across the country and as the collection grows in spatial / temporal coverage, the NSD will service continental scale validation requirements of the Earth observation community for satellite-based measurements of surface reflectance. The NSD is accessed with information provided at the NSD Geoscience Australia Content Management Interface (CMI) web page: https://cmi.ga.gov.au/data-products/dea/643/australian-national-spectral-database <b>Value:</b> Curated spectral data provides a wealth of knowledge to remote sensing scientists. For other parties interested in calibration and validation (Cal/Val) of surface reflectance products, the Geoscience Australia (GA) Cal/Val dataset provides a useful resource of ground-truth data to compare to reflectance captured by Landsat 8 and Sentinel 2 satellites. The Aquatic Library is a robust collection of Australian datasets from 1994 to present time, primarily of end-member and substratum measurements. The University of Wollongong collection represents immense value in end-member studies, both terrestrial and aquatic. <b>Scope:</b> The NSD covers Australian data including historical datasets as old as 1994. Physical study sites encompass locations around Australia, with spectra captured in every state. <b>Data types:</b> - Spectral data: raw digital numbers (DN), radiance and reflectance.  - From spectral bands VIS-NIR, SWIR1 & SWIR2: wavelengths 350nm - 2500nm collected with instruments in the field or lab setting. Contact for further information: NSDB_manager@ga.gov.au <b>To view the entire collection click on the keyword "HVC 144490" in the below Keyword listing <b>

<div>In recent years Geoscience Australia has undertaken a successful continental scale validation program, targeting Landsat and Sentinel analysis ready data surface reflectance products. The field validation model used for this program successfully built on earlier studies and the measurement uncertainties associated with these protocols have been quantified and published. As a consequence, the Australian earth observation community was well-placed to respond to the United States Geological Survey (USGS) call for collaborators with the 2021 Landsat 8 (L8) and Landsat 9 (L9) 6 underfly. Despite a number of challenges, seven validation datasets were captured across five sites. As there was only a single 100% overlap transit across Australia and with the country in the midst of a strong La Niña climate cycle, it was decided to deploy teams to the two available overpasses with only 15% side lap. The validation sites encompassed rangelands, chenopod scrublands and a large inland lake. Apart from instrument problems at one site, good weather enabled the capture of high quality field data allowing for meaningful comparisons between the radiometric performance of L8 and L9, as well as the USGS and Australian Landsat analysis ready data processing models. Duplicate (cross calibration) spectral sampling at different sites provides evidence of the field protocol reliability, while the off-nadir view of L9 over the water site has been used to better compare the performance of different water and atmospheric correction (ATCOR) processing models.&nbsp;</div> <b>Citation: </b>Byrne, G.; Broomhall, M.; Walsh, A.J.; Thankappan, M.; Hay, E.; Li, F.; McAtee, B.; Garcia, R.; Anstee, J.; Kerrisk, G.; et al. Validating Digital Earth Australia NBART for the Landsat 9 Underfly of Landsat 8. <i>Remote Sens.</i> <b>2024</b>, 16, 1233. https://doi.org/10.3390/rs16071233

Record for source data - Calibration & Validation Surface Reflectance Measurements for the National Spectral Database (NSD). This is a collection of Phase 1 & Phase 2 datasets from Geoscience Australia Analysis Ready Data (ARD) Calibration & Validation's field program. The data is intended to serve the GA ARD surface reflectance validation pipeline. Phase 1 field campaigns are summarised in the technical report: Byrne, G., Walsh, A., Thankappan, M., Broomhall, M., Hay, E. 2021. DEA Analysis Ready Data Phase 1 Validation Project : Data Summary. Geoscience Australia, Canberra. doi.org/10.26186/145101

This report describes the results of an extended national field spectroscopy campaign designed to validate the Landsat 8 and Sentinel 2 Analysis Ready Data (ARD) surface reflectance (SR) products generated by Digital Earth Australia. Field spectral data from 55 overpass coincident field campaigns have been processed to match the ARD surface reflectances. The results suggest the Landsat 8 SR is validated to within 10%, the Sentinel 2A SR is validated to within 6.5% and Sentinel 2B is validated to within 6.8% . Overall combined Sentinel 2A and 2B are validated within 6.6% and the SR for all three ARD products are validated to within 7.7%.