This service represents a combination of two data products, the DEM_SRTM_1Second dataset and the Australian_Bathymetry_Topography dataset. This service was created to support the CO2SAP (Co2 Storage application) Project to create a transect elevation graph within the application. This data is not available as a dataset for download as a Geoscience Australia product. The DEM_SRTM_1Second service represents the National Digital Elevation Model (DEM) 1 Second product derived from the National DEM SRTM 1 Second. The DEM represents ground surface topography, with vegetation features removed using an automatic process supported by several vegetation maps. eCat record 72759. The Australian_Bathymetry_Topography service describes the bathymetry dataset of the Australian Exclusive Economic Zone and beyond. Bathymetry data was compiled by Geoscience Australia from multibeam and single beam data (derived from multiple sources), Australian Hydrographic Service (AHS) Laser Airborne Depth Sounding (LADS) data, Royal Australian Navy (RAN) fairsheets, the General Bathymetric Chart of the Oceans (GEBCO) bathymetric model, the 2 arc minute ETOPO (Smith and Sandwell, 1997) and 1 arc minute ETOPO satellite derived bathymetry (Amante and Eakins, 2008). Topographic data (onshore data) is based on the revised Australian 0.0025dd topography grid (Geoscience Australia, 2008), the 0.0025dd New Zealand topography grid (Geographx, 2008) and the 90m SRTM DEM (Jarvis et al, 2008). eCat record 67703. IMPORTANT INFORMATION For data within this service that lays out of the Australian boundary the following needs to be considered. This grid is not suitable for use as an aid to navigation, or to replace any products produced by the Australian Hydrographic Service. Geoscience Australia produces the 0.0025dd bathymetric grid of Australia specifically to provide regional and local broad scale context for scientific and industry projects, and public education. The 0.0025dd grid size is, in many regions of this grid, far in excess of the optimal grid size for some of the input data used. On parts of the continental shelf it may be possible to produce grids at higher resolution, especially where LADS or multibeam surveys exist. However these surveys typically only cover small areas and hence do not warrant the production of a regional scale grid at less than 0.0025dd. There are a number of bathymetric datasets that have not been included in this grid for various reasons.

22-1/H54-02/19 Contour interval: 2

Arcview GIS containing a regolith-landfrom map with associated site database. Most sites have a field photograph hot linked into the GIS. Complementary datasets include, digital elevation model and enhanced Landsat TM imagery.

Airborne Geophysical Data Acquired as part of the Gawler Mineral Promotion Project. Includes point located, gridded and image data. TEMPEST electromagnetics, magnetics and elevation data.

Laser DEM Grids consists of 27 digital elevation model grids. The Arcview grid files were constructed from the Airborne Laser Scanning shapefiles. The Laser DEM grid tiles cover the eastern portion of the Christmas Island. Each grid contains the height in metres of the ground surface with a value every one metre on the ground.

The Digital Elevation Model (DEM) 25 Metre Grid of Australia derived from LiDAR model represents a National 25 metre (bare earth) DEM which has been derived from some 236 individual LiDAR surveys between 2001 and 2015 covering an area in excess of 245,000 square kilometres. These surveys cover Australia's populated coastal zone; floodplain surveys within the Murray Darling Basin, and individual surveys of major and minor population centres. All available 1 metre resolution LiDAR-derived DEMs have been compiled and resampled to 25 metre resolution datasets for each survey area, and then merged into a single dataset for each State. These State datasets have also been merged into a 1 second resolution national dataset.

The 2011 digital elevation model (DEM) grid covers the whole of the Christmas Island. It was provided by AAM in 1km by 1km ESRI grid tiles which were then joined together using ESRI ArcMap. Each grid cell (1m by 1m) contains the height in metres of the ground surface derived from the 2011 LiDAR aerial survey data.

The 3 second (~90m) Smoothed Digital Elevation Model (DEM-S) Version 1.0 was derived from resampling the 1 second SRTM derived DEM-S (gridded smoothed digital elevation model; ANZCW0703014016). The DEM represents ground surface topography, excluding vegetation features, and has been smoothed to reduce noise and improve the representation of surface shape. The DEM-S was derived from the 1 second Digital Surface Model (DSM; ANZCW0703013336) and the Digital Elevation Model Version 1.0 (DEM; ANZCW0703013355) by an adaptive smoothing process that applies more smoothing in flatter areas than hilly areas, and more smoothing in noisier areas than in less noisy areas. This DEM-S supports calculation of local terrain shape attributes such as slope, aspect and curvatures that could not be reliably derived from the unsmoothed 1 second DEM because of noise. A full description of the methods is in progress (Gallant et al., in prep) and in the 1 second User Guide. The 3 second DEM was produced for use by government and the public under Creative Commons attribution. The 1 second DSM and DEM that forms the basis of the product are also available as 3 second products (DSM; ANZCW0703014216, DEM; ANZCW0703014182, DEM-S; ANZCW0703014217). <strong>Please note that all 1 second products are available for GOVERNMENT USERS ONLY.</strong>

The digital elevation model (DEM) grid covers the whole of the Cocos (Keeling) Islands. It was provided by AAM in 1km by 1km tiles which were then joined together using ESRI ArcMap. Each grid cell (1m x 1m) contains the height, in metres, of the ground surface derived from the 2011 LiDAR aerial survey data.

22-1/G54-14/19 Contour interval: 2