<div>The Abbot Point to Hydrographers Passage bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the RV Escape during the period 6 Oct 2020 – 16 Mar 2021. This was a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Point through Hydrographers Passage QLD. Bathymetry data was acquired using a Kongsberg EM 2040, and processed using QPS QINSy. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

The Historical Bushfire Boundaries service represents the aggregation of jurisdictional supplied burnt areas polygons stemming from the early 1900's through to 2022 (excluding the Northern Territory). The burnt area data represents curated jurisdictional owned polygons of both bushfires and prescribed (planned) burns. To ensure the dataset adhered to the nationally approved and agreed data dictionary for fire history Geoscience Australia had to modify some of the attributes presented. The information provided within this service is reflective only of data supplied by participating authoritative agencies and may or may not represent all fire history within a state.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

This map is part of the AUSTopo - Australian Digital Topographic Map Series. It covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 516 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of approximately 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and at least 110 kilometres from north to south. The topographic map shows approximate coverage of the sheets. The map may contain information from surrounding map sheets to maximise utilisation of available space on the map sheet. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. Coordinates: Geographical and MGA Datum: GDA94, GDA2020, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Digital PDF download.

A short video demonstrating how Geoscience Australia through SouthPAN is bringing benefits to urban navigation.