This map is part of a series which comprises 50 maps which covers the whole of Australia at a scale of 1:1 000 000 (1cm on a map represents 10km on the ground). Each standard map covers an area of 6 degrees longitude by 4 degrees latitude or about 590 kilometres east to west and about 440 kilometres from north to south. These maps depict natural and constructed features including transport infrastructure (roads, railway airports), hydrography, contours, hypsometric and bathymetric layers, localities and some administrative boundaries, making this a useful general reference map.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.

The International Map of the World (IMW) series is no longer maintained, and printed copies of this map are no longer available. The Australian portion of the series consists of 49 maps. They were produced to an international specification using the R502 series at 1:250,000 scale as source material. Production commenced in 1926 and was completed in 1978. The maps were revised from time to time and the last reprint was undertaken in 2003. Each standard map sheet covers 4 degrees of latitude by 6 degrees of longitude and was produced using a Lambert Conformal Conic projection with 2 standard parallels. The series has recently been superseded by the 1:1 000 000 topographic map general reference.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.

At this scale 1cm on the map represents 1km on the ground. Each map covers a minimum area of 0.5 degrees longitude by 0.5 degrees latitude or about 54 kilometres by 54 kilometres. The contour interval is 20 metres.

250K topographic map 2010 Edition 4

At this scale 1cm on the map represents 1km on the ground. Each map covers a minimum area of 0.5 degrees longitude by 0.5 degrees latitude or about 54 kilometres by 54 kilometres. The contour interval is 20 metres.

At this scale 1cm on the map represents 1km on the ground. Each map covers a minimum area of 0.5 degrees longitude by 0.5 degrees latitude or about 54 kilometres by 54 kilometres. The contour interval is 20 metres.

This map shows the estimated extent of banana plantations in Innisfail on (date to be determined), prior to Tropical Cyclone Yasi (TC Yasi) impacting the area. Cloudy conditions over areas affected by TC Yasi required the use of cloud penetrating radar satellites to observe the affected areas.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.