The National Geochemical Survey of Australia (NGSA) is Australia’s only internally consistent, continental-scale geochemical atlas and dataset (<a href="http://dx.doi.org/10.11636/Record.2011.020">http://dx.doi.org/10.11636/Record.2011.020</a>). The present dataset provides additional geochemical data for Li, Be, Cs, and Rb acquired as part of the Australian Government-funded Exploring for the Future (EFTF) program and in support of the Australian Government’s 2023-2030 Critical Minerals Strategy. The dataset fills a knowledge gap about Li distribution in Australia over areas dominated by transported regolith. The main ‘total’ element analysis method deployed for NGSA was based on making a fused bead using lithium-borate flux for XRF then ICP-MS analysis. Consequently, the samples could not be meaningfully analysed for Li. All 1315 NGSA milled coarse-fraction (<2 mm) top (“TOS”) catchment outlet sediment samples, taken from 0 to 10 cm depth in floodplain landforms, were analysed in the current project following the digestion method that provides near-total concentrations of Li, Be, Cs, and Rb. The samples were analysed by the commercial laboratory analysis service provider Bureau Veritas in Perth using low-level mixed acid (a mixture of nitric, perchloric and hydrofluoric acids) digestion with elements determined by ICP-MS (Bureau Veritas methods MA110 and MA112). The data are reported in the same format as the NGSA dataset, allowing for seamless integration with previously released NGSA data. Further details on the QA/QC procedures as well as data interpretation will be reported elsewhere. This data release also includes four continental-scale geochemical maps for Li, Be, Cs, and Rb built from these analytical data. This dataset, in conjunction with previous data published by NGSA, will be of use to mineral exploration and prospectivity modelling around Australia by providing geochemical baselines for Li, Be, Cs, and Rb, as well as identifying regions of anomalism. Additionally, these data also have relevance to other applications in earth and environmental sciences.

<div>The Central Australian Basins 2D Seismic Reprocessing Project is an initiative under Geoscience Australia's "Australia’s Future Energy Resources" (AFER) program, funded by the Australian Government through the "Exploring for the Future" (EFTF) program. The project aims to assess the untapped resource potential of selected underexplored onshore sedimentary basins in terms of natural gas, oil, and groundwater, while also investigating opportunities for geological storage of carbon dioxide and hydrogen. By providing pre-competitive data, the initiative seeks to stimulate investment in mineral, energy, and groundwater exploration.</div><div>&nbsp;</div><div>This project focuses on improving the understanding of the geological evolution and relationships among various Australian basins, ranging from the early Paleozoic Amadeus, Warburton and Adavale basins to the Permian-Triassic Pedirka, Simpson, northern Cooper and southern Galilee basins, and the Jurassic–Cretaceous western Eromanga Basin. To achieve this, modern seismic processing techniques were applied to 33 selected multi-vintage legacy lines with a total length of approximately 2,100 km, enhancing the resolution and image quality of the seismic lines. The dataset includes deep crustal as well as shallow lines from Queensland and South Australia. The data were collected using various acquisition sources such as Vibroseis, Geoflex, and dynamite. Six merged lines were also created to aid in interpretation.</div><div>&nbsp;</div><div>Both stacks and gather data are provided in SEG-Y format, along with navigation data, velocity, and statics. The reprocessing focused on enhancing seismic reflectors and faults, attenuating noise, and optimising frequency content for target depths. Techniques used in the reprocessing include creating a 3D static model, noise attenuation methods, minimum phasing of the Vibroseis data to match dynamite lines, surface-consistent deconvolution, and building a precise velocity model for optimising pre-stack time and depth migration.</div><div><br></div><div><strong>Processed gather data&nbsp;for this survey are also available on request from clientservices@ga.gov.au - Quote eCat# 148931</strong></div>

<div>The dataset contained in this package and release consists of GA’s Layered-Earth-Inversion (GALEI, Brodie, 2016) conductivity-depth estimates from the AEM data, acquired over several areas of Western Australia, converted into SEG-Y format. The SEG-Y data standard was proposed by the Society of Exploration Geophysicists (SEG) standards committee (see Norris & Faichney 2002). Previously, the AEM data has been released as point located line data in conventional ascii format and is accessible through several of the following associated eCat records (<a href="https://pid.geoscience.gov.au/dataset/ga/146345">146345</a>, <a href="https://pid.geoscience.gov.au/dataset/ga/146042">146042</a>, <a href="https://pid.geoscience.gov.au/dataset/ga/144621">144621</a>, <a href="https://pid.geoscience.gov.au/dataset/ga/145265">145265</a> and <a href="https://pid.geoscience.gov.au/dataset/ga/147688">147688</a>). This SEG-Y data release is expected to benefit users who require the AEM modelled sections in SEG-Y format to assist in their interpretations, investigations and discovery of potential mineral, energy, and groundwater resources within Australia.&nbsp;</div>

<div>Geoscience Australia’s Onshore Basin Inventories project delivers a single point of reference and creates a standardised national basin inventory that provides a whole-of-basin catalogue of geology, petroleum systems, exploration status and data coverage of hydrocarbon-prone onshore Australian sedimentary basins. In addition to summarising the current state of knowledge within each basin, the onshore basin inventory reports identify critical science questions and key exploration uncertainties that may help inform future work program planning and decision making for both government and industry. Volume 1 of the inventory covers the McArthur, South Nicholson, Georgina, Wiso, Amadeus, Warburton, Cooper and Galilee basins and Volume 2 expands this list to include the Officer, Perth and onshore Canning basins. Under Geoscience Australia’s Exploring for the Future (EFTF) program, several new onshore basin inventory reports are being delivered. Upcoming releases include the Adavale Basin of southern Queensland, and a compilation report addressing Australia’s poorly understood Mesoproterozoic basins. These are supported by value-add products that address identified data gaps and evolve regional understanding of basin evolution and prospectivity, including petroleum systems modelling, seismic reprocessing and regional geochemical studies. The Onshore Basin Inventories project continues to provide scientific and strategic direction for pre-competitive data acquisition under the EFTF work program, guiding program planning and shaping post-acquisition analysis programs.</div>

<div>The National Geochemical Survey of Australia (NGSA) is Australia’s only internally consistent, continental-scale geochemical atlas and dataset. The present dataset contains additional mineralogical data obtained on NGSA samples selected from the Barkly-Isa-Georgetown (BIG) region of northeastern Australia for the second partial data release of the Heavy Mineral Map of Australia (HMMA) project. The HMMA project, a collaborative project between Geoscience Australia and Curtin University underpinned by a pilot project establishing its feasibility, is part of the Australian Government-funded Exploring for the Future (EFTF) program.</div><div>One-hundred and eighty eight NGSA sediment samples were selected from the HMMA project within the EFTF’s BIG polygon plus an approximately one-degree buffer. The samples were taken on average from 60 to 80 cm depth in floodplain landforms, dried and sieved to a 75-430 µm grainsize fraction, and the contained heavy minerals (HMs; i.e., those with a specific gravity > 2.9 g/cm3) were separated by dense fluids and mounted on cylindrical epoxy mounts. After polishing and carbon-coating, the mounts were subjected to automated mineralogical analysis on a TESCAN® Integrated Mineral Analyzer (TIMA). Using scanning electron microscopy and backscatter electron imaging integrated with energy dispersive X-ray analysis, the TIMA identified 151 different HMs in the BIG area. The dataset, consisting of over 18 million individual mineral grains, was quality controlled and validated by an expert team. The data released here can be visualised, explored and downloaded using an online, bespoke mineral network analysis (MNA) tool built on a cloud-based platform. Preliminary analysis suggests that copper minerals cuprite and chalcopyrite may be indicative of base-metal/copper mineralisation in the area. Accompanying this report are two data files of TIMA results, and a minerals vocabulary file. </div><div>When completed in 2023, it is hoped the HMMA project will positively impact mineral exploration and prospectivity modelling around Australia, as well as have other applications in earth and environmental sciences.</div>

<div>Geoscience Australia’s Onshore Basin Inventories program provides a whole-of-basin inventory of geology, energy systems, exploration status and data coverage of onshore Australian basins. Volume 1 of the inventory covers the McArthur, South Nicholson, Georgina, Wiso, Amadeus, Warburton, Cooper and Galilee basins and Volume 2 expands this list to include the Officer, Perth and onshore Canning basins. These reports provide a single point of reference and create a standardised national inventory of onshore basins. In addition to summarising the current state of knowledge within each basin, the onshore basin inventory identifies critical science questions and key exploration uncertainties that may help inform future work program planning and aid in decision making for both government and industry organisations. Under Geoscience Australia’s Exploring for the Future (EFTF) program, six new onshore basin inventory reports will be delivered. </div><div>&nbsp;</div><div>These reports will be supported by selected value-add products that aim to address identified data gaps and evolve regional understanding of basin evolution and prospectivity. Petroleum system modelling is being undertaken in selected basins to highlight the hydrocarbon potential in underexplored provinces, and seismic reprocessing and regional geochemical studies are underway to increase the impact of existing datasets. The inventories are supported by the ongoing development of the nationwide source rock and fluids atlas, accessed through Geoscience Australia’s Exploring for the Future Data Discovery Portal, which continues to improve the veracity of petroleum system modelling in Australian onshore basins.</div><div>&nbsp;</div><div>In summarising avenues for further work, the Onshore Basin Inventories program has provided scientific and strategic direction for pre-competitive data acquisition under the EFTF work program. Here, we provide an overview of the current status of the Onshore Basin Inventories, with emphasis on its utility in shaping EFTF data acquisition and analysis, as well as new gap-filling data acquisition</div> This Abstract was submitted/presented at the 2023 Australasian Exploration Geoscience Conference (AEGC) 13-18 March (https://2023.aegc.com.au/)

<div>The National Geochemical Survey of Australia (NGSA) is Australia’s only internally consistent, continental-scale geochemical atlas and dataset. The present report presents additional mineralogical data acquired as part of the Heavy Mineral Map of Australia (HMMA) project on the NGSA samples, covering ~81% of Australia. The HMMA project, a collaborative project between Geoscience Australia and Curtin University underpinned by a pilot project establishing its feasibility, is part of the Australian Government-funded Exploring for the Future (EFTF) program.</div><div>All of the 1315 NGSA bottom catchment outlet sediment samples, taken on average from 60 to 80 cm depth in floodplain landforms, were used in the HMMA project. The samples were dried and sieved to a 75-425 µm grainsize fraction, and the contained heavy minerals (HMs; i.e., those with a specific gravity > 2.9 g/cm3) were separated by dense fluids and mounted on cylindrical epoxy mounts. After polishing and carbon-coating, the mounts were subjected to automated mineralogical analysis on a TESCAN® Integrated Mineral Analyzer (TIMA). Using scanning electron microscopy and backscatter electron imaging integrated with energy dispersive X-ray analysis, the TIMA identified 163 unique phases (including ‘Unclassified”) in the NGSA sample set. The dataset, consisting of over 145 million individual mineral grains, was quality controlled and validated by an expert team. The data released here can be visualised, explored and downloaded using a free online, bespoke mineral network analysis (MNA) tool built on a cloud-based platform. Preliminary analysis suggests that zinc minerals and native elements&nbsp;(e.g., native gold and platinum) may be useful in mineral exploration applications. Detailed interpretations of the HMMA dataset will be provided elsewhere. Accompanying this report are data files of TIMA results, a minerals property file, and an atlas of HM distribution maps. </div><div>It is hoped the comprehensive dataset generated by the HMMA project will be of use to mineral exploration and prospectivity modelling around Australia, as well as have other applications in earth and environmental sciences.</div>

<div>The Geoscience Australia magnetotellurics (MT) program collaborates with state and territory geological surveys, universities, and AuScope to acquire audio- (AMT), broadband- (BBMT), and long-period-MT (LPMT) data to help understand the electrical conductivity structure of the Australian continent.</div><div><br></div><div>This report collates the time-series and processed data, electrical conductivity models, and publications released for projects for which Geoscience Australia was the lead organisation, a collaborator, or an in-kind or financial supporter. For the most part, this report does not reference MT data, models or publications released by other parties for projects in which Geoscience Australia had no involvement. Please see Geoscience Australia’s AusLAMP, Exploring for the Future AusLAMP, and Regional Magnetotellurics webpages for more information.</div>

<div>The Australian Government’s Data Driven Discoveries program has reprocessed 60 selected multi-era legacy seismic lines, covering approximately 2,520 km across the Adavale Basin, south-central Queensland. Reprocessing of legacy seismic data from the Adavale Basin aims to create a modern, consistent and integrated seismic dataset that provides new insights into the geological structure of the basin and deepens our understanding of the basin’s minerals, energy, underground storage and groundwater potential.</div><div><br></div><div>The reprocessed lines were chosen to tie into 5 wells that were previously sampled for chemostratigraphic analysis through the Data Driven Discoveries program (Riley et al., 2023, eCat 147773), including Allendale 1, Boree 1, Gilmore 1, Quilberry 1 and Stafford 1. The Adavale Basin 2D Reprocessed Seismic Data Package also complements new deep crustal seismic data being acquired in the Adavale Basin by the program.</div><div><br></div><div>The reprocessing workflow prioritised enhancing the image quality of the selected legacy seismic lines, reducing noise, and fine-tuning frequency content for specific target depths. Techniques employed included creating a 3D static model, applying noise attenuation methods, surface-consistent deconvolution, and constructing an accurate velocity model to optimise pre-stack time and depth migration. </div><div><br></div><div>Both stacks and gather data are provided in SEG-Y format, along with navigation data, velocity, and statics.</div><div><strong>&nbsp;</strong></div><div><strong>Processed gather data for this survey are available on request from clientservices@ga.gov.au - Quote eCat# 149018</strong></div>

<div>The Exploring for the Future program (EFTF) is a $225M Federal Government-funded initiative spanning the period July 2016 to June 2024. This multi-disciplinary program involves aspects of method development and new pre-competitive data acquisition at a variety of scales, with the aim of building an integrated understanding of Australia’s mineral, energy and groundwater potential. Significant work has been undertaken across northern Australia within regional-scale projects and as part of national-scale data acquisition and mapping activities. Some of these activities have been largely completed, and have generated new data and products, while others are ongoing. A comprehensive overview of the EFTF program can be found via the program website (eftf.ga.gov.au). Here, we overview a range of activities with implications for resource exploration in the Northern Territory.</div><div><br></div>This Abstract was submitted & presented to the 2023 Annual Geoscience Exploration Seminar (AGES), Alice Springs (https://industry.nt.gov.au/news/2022/december/registrations-open-for-ages-2023)