The Flood Study Summary Services support discovery and retrieval of flood hazard information. The services return metadata and data for flood studies and flood inundation maps held in the 'Australian Flood Studies Database'. The same information is available through a user interface at http://www.ga.gov.au/flood-study-web/. A 'flood study' is a comprehensive technical investigation of flood behaviour. It defines the nature and extent flood hazard across the floodplain by providing information on the extent, level and velocity of floodwaters and on the distribution of flood flows. Flood studies are typically commissioned by government, and conducted by experts from specialist engineering firms or government agencies. Key outputs from flood studies include detailed reports, and maps showing inundation, depth, velocity and hazard for events of various likelihoods. The services are deliverables fom the National Flood Risk Information Project. The main aim of the project is to make flood risk information accessible from a central location. Geoscience Australia will facilitate this through the development of the National Flood Risk Information Portal. Over the four years the project will launch a new phase of the portal prior to the commencement of each annual disaster season. Each phase will increase the amount of flood risk information that is publicly accessible and increase stakeholder capability in the production and use of flood risk information. flood-study-search returns summary layers and links to rich metadata about flood maps and the studies that produced them. flood-study-map returns layers for individual flood inundation maps. Typically a single layer shows the flood inundation for a particular likelihood or historical event in a flood study area. To retrieve flood inundation maps from these services, we recommend: 1. querying flood-study-search to obtain flood inundation map URIs, then 2. using the flood inundation map URIs to retrieve maps separately from flood-study-map. The ownership of each flood study remains with the commissioning organisation and/or author as indicated with each study, and users of the database should refer to the reports themselves to determine any constraints in their usage.

On 23 March 2012, at 09:25 GMT, a MW 5.4 earthquake occurred in the eastern Musgrave Ranges region of north-central South Australia, near the community of Ernabella (Pukatja). This was the largest earthquake to be recorded on mainland Australia for the past 15 years and resulted in the formation of a 1.6 km-long surface deformation zone comprising reverse fault scarps with a maximum vertical displacement of over 50 cm, and extensive ground cracking. Numerous small communities in this remote part of central Australia reported the tremor, but there were no reports of injury or significant damage. The maximum ground shaking is estimated to have been in the order of MMI VI. The earthquake occurred in Stable Continental Region (SCR) crust, over 1900 km from the nearest plate boundary. Fewer than fifteen historic earthquakes worldwide are documented to have produced coseismic surface deformation (i.e. faulting or folding) in the SCR setting. The record of surface deformation relating to the Ernabella earthquake therefore provides an important constraint on models relating surface rupture length to earthquake magnitude. Such models may be employed to better interpret Australia's rich prehistoric record of seismicity, thereby improving estimates of seismic hazard.

A multi-hazard and exposure analysis of Asia. A GIS study that incorporates regional data for: landslide, tsunami, earthquake, tropical cyclone, volcanic, drought and flood hazard.

The Tropical Cyclone Risk Model (TCRM) is a stochastic modelling system intended for the evaluation of hazard and risk associated with tropical cyclones, specifically focused on wind hazard. It allows users to simulate a large (order thousands of years) catalogue of tropical cyclone events that are statistically similar to the historical tropical cyclone record (or other input tropical cyclone records). TCRM has been used to evaluate wind hazard at local and regional scales to inform risk assessments and multi-hazard mapping exercises. By using data extracted from global climate models, TCRM can also be used to evaluate future changes in TC hazard and risk. Users can also simulate single TC events to evaluate impacts in near-real time to inform emergency management and response activities. The TCRM code is written in Python, and can be executed on a range of computing architectures - massively parallel systems (e.g. NCI National Facility) to desktop computers - and operating systems (currently Windows and *NIX systems). By carefully designing and developing the software, we have accommodated a wide audience of potential users.

Developing a framework and computational methodology for evaluating the impacts and risks of extreme fire events on regional and peri-urban populations (infrastructure and people) applicable to the Australian region. The research considers three case studies of recent extreme fires employing an ensemble approach (sensitivity analysis) which varies the meteorology, vegetation and ignition in an effort to estimate fire risk to the case-study fire area and adjacent region.

Interactive Maps is a discovery and exploration view of Geoscience Australia's geospatial services. The following scientific and decision support themes have curated content comprised of maps and functions. Each map has queries and functions with linked access to OGC (Open Geospatial Consortium) web services and metadata. This system replaces MapConnect and AMSIS applications.

The Australian Flood Risk Information Portal (the portal) is an initiative of the Australian Government, established following the devastating floods across Eastern Australia in 2011. The portal is a key component of the National Flood Risk Information Project (NFRIP), and aims to provide a single point of access to Australian flood information. Currently much of Australia's existing flood information is dispersed across disparate sources, making it difficult to find and access. The portal will host data and tools that allow public discovery, visualisation and retrieval of flood studies, flood maps, satellite derived water observations and other related information, all from a single location. The portal will host standards and guidelines for use by jurisdictions and information custodians to encourage best practice in the development of new flood risk information. While the portal will initially host existing flood information, the architecture has been designed to allow the portal content to grow over time to meet the needs of users. The aim is for the portal to display data for a range of scenarios from small to extreme events, though this will be dependent on stakeholder contributions. Geoscience Australia's Australian Flood Studies Database is the portal's data store of flood study information. The database includes metadata created through a purpose-built data entry application, and over time, information harvested from state-operated catalogues. For each entry the portal provides a summary of the flood study, including information on how the study was done, what data was used, what flood maps were produced and for what scenarios, as well as details on the custodian and originating author. If the study included an assessment of damage, details such as estimates of annual average damage, or the number of properties affected during a flood of a particular likelihood will also be included. During the last phase of development downloadable flood study reports and their associated flood maps have been added to the portal where available. As the portal is populated it will increasingly host mapped flood data, or link to flood data and maps held in authoritative databases hosted by State and Territory bodies. Mapping data to be made accessible through the portal will include flood extents and to a lesser degree information on water depths. The portal will also include water observations obtained from Geoscience Australia's historic archive of Landsat imagery. This data will show whether a particular location was 'wet' at some point during the past 30 years. While this imagery does not necessarily represent the peak of a flood or show water depth, the data will support the validation and verification process of hydrologic and hydraulic flood modelling. This work will prove useful particularly in rural areas where there is little or no flood information. The portal also provides flood information custodians with the ability to either upload mapped data directly to the portal or to make this data accessible via web services. Data management tools and standards, developed through NFRIP, will enable data custodians to map their data to agreed standards for delivery through the portal. A portal framework and supporting principles has been developed to guide the maintenance and development of the portal.

Coastal communities in Australia are particularly exposed to disasters resulting from the coincidence of severe wind damage, storm surge, coastal flooding and shoreline erosion during cyclones and extra-tropical storms. Because the climatic drivers of these events are stronger during or across specific years (e.g. during La Nina periods), they can repeatedly impact the coast over periods of weeks, months or up to a few years. The consequences of individual events are therefore exacerbated with little or no opportunity for recovery of natural systems or communities. This poster summarises the objectives, approach and methodology for this storm surge project. A contribution to the Bushfire and Natural Hazards CRC.

Stochastic finite-fault ground-motion prediction equations (GMPEs) are developed for the stable continental region of southeastern Australia (SEA). The models are based on reinterpreted source and attenuation parameters for small-to-moderate magnitude local earthquakes and a dataset augmented with ground-motion records from recent significant earthquakes. The models are applicable to horizontal-component ground-motions for earthquakes 4.0 <= MW <= 7.5 and at distances less than 400 km. The models are calibrated with updated source and attenuation parameters derived from SEA ground-motion data. Careful analysis of well-constrained earthquake stress parameters indicates a dependence on hypocentral depth. It is speculated that this is the effect of an increasing crustal stress profile with depth. However, rather than a continuous increase, the change in stress parameter appears to indicate a discrete step near 10 km depth. Average stress parameters for SEA earthquakes shallower and deeper than 10 km are estimated to be 23 MPa and 50 MPa, respectively. These stress parameters are consequently input into the stochastic ground-motion simulations for the development of two discrete GMPEs for shallow and deep events. The GMPEs developed estimate response spectral accelerations comparable to the Atkinson and Boore (2006) GMPE for eastern North America (ENA) at short rupture distances (less than approximately 100 km). However, owing to higher attenuation observed in the SEA crust (Allen and Atkinson, 2007), the SEA GMPEs estimate lower ground-motions than ENA models at larger distances. A correlation between measured VS30 and ?0 was developed from the limited data available to determine the average site condition to which the GMPEs are applicable. Assuming the correlation holds, a VS30 of approximately 820 m/s is obtained assuming an average path-independent diminution term ?0 of 0.006 s from SEA seismic stations. Consequently, the GMPE presented herein can be assumed to be appropriate for rock sites of B to BC site class in the National Earthquake Hazards Reduction Program (NEHRP, 2003) site classification scheme. The response spectral models are validated against moderate-magnitude (4.0 <= MW <= 5.3) earthquakes from eastern Australia. Overall the SEA GMPEs show low median residuals across the full range of period and distance. In contrast, ENA models tend to overestimate response spectra at larger distances. Because of these differences, the present analysis justifies the need to develop Australian-specific GMPEs where ground-motion hazard from a distant seismic source may become important.

Tropical cyclone return period wind hazard layers developed using the Tropical Cyclone Risk Model. The hazard layers are derived from a catalogue of synthetic tropical cyclone events representing 10000 years of activity. Annual maxima are evaluated from the catalogue and used to fit a generalised extreme value distribution at each grid point.