<div>Exploring for the Future (EFTF) is a program dedicated to exploring Australia’s resource potential and boosting investment. This program is designed to produce pre-competitive information to assist with the evaluation of the hydrocarbon resource potential of onshore basins and attract exploration investment to Australia. This record presents geochemical analyses of natural gases sampled from Nangwarry 1, located in the onshore Otway Basin, undertaken in partnership with the Department for Energy and Mining – Energy Resources, Government of South Australia, as part of the EFTF program Natural Hydrogen module. The Nangwarry Joint Venture drilled Nangwarry 1 to investigate the potential for the development of food grade, carbon dioxide production from this well. The results of the molecular and stable carbon and hydrogen isotopic analyses undertaken by Geoscience Australia are released in this report. The molecular data show that the gas composition in this well has an average of 96 mol% CO2 with an isotopic signature indicative of a magmatic origin, being comparable with previously produced gases from onshore Otway Basin wells (e.g. Boggy Creek 1, Caroline 1) for use by the food industry. The carbon and hydrogen isotopic composition of the C1–C5 hydrocarbon gases from Nangwarry 1 are suggestive of a source from within the Crayfish Supersequence.</div>

Geoscience Australia has undertaken a regional seismic mapping study of the offshore Otway Basin extending across the explored inner basin to the frontier deep-water region. Seismic interpretation covers over 18000 line-km of new and reprocessed data acquired in the 2020 Otway Basin seismic program and over 40000 line-km of legacy 2D seismic data. We present new basin-scale isochore maps that show the distribution of the Cretaceous depocentres. Maps for the Lower Cretaceous Crayfish and Eumeralla supersequences, together with those recently published for the Upper Cretaceous Shipwreck and Sherbrook Supersequences, completes the set of isochore maps for the main tectonostratigraphic basin intervals. Mapping of basement involved faults has revealed structural fabrics that have influenced depocentre development. The tectonostratigraphic development of depocentres and maps of deep crustal units delineate crustal thinning trends related to late Cretaceous extension phases. This work highlights the need to review and update structural elements. For example, the boundary between the Otway and Sorell basins is now geologically constrained. The refinements to the tectonostratigraphic evolution of the Otway Basin presented here have important implications for the distribution and potential maturity of petroleum systems, especially with regard to heat flow associated with crustal extension. Presented at the 2024 Australian Energy Producers Conference & Exhibition (AEP) (https://energyproducersconference.au/conference/)

Over 8,200 line kilometres of gravity and magnetic data, acquired during the 2020 Otway Basin Seismic Program (OBSP), were combined with public domain survey and satellite data to produce seamless maps of the NW-SE trending deep-water Otway Basin. These data provide valuable information on the geometry and spatial extent of igneous rocks in the deep-water basin. While the top of basement can effectively be imaged from seismic reflection datasets onshore in the Otway Basin, it remains problematic in parts of the deep-water offshore region due to variable seismic data quality. Modelling of the magnetic line data provides an estimate of the depth to the top of basement, an important interface for understanding hydrocarbon prospectivity because it plays a key role in characterising the tectonic evolution of the basin, and thus the thermal maturation history of hydrocarbons. Magnetic modelling was performed using a profile-based curve matching technique producing a depth estimate to the top of the magnetic body that is assumed to be the top of the basement. However, this assumption is flawed where there are volcanic or igneous intra-sedimentary rocks in the basin, as is the case for the Otway Basin where the interpretation of seismic reflection data shows highly reflective events corresponding to igneous features. In most parts of the basin, the modelling results show two layers: a shallow layer (depths < 1000m) corresponding to near surface volcanics, and a deeper layer (depths > 1000m) attributed to the top of the magnetic basement. Magnetic basement shows some similarities with basement picked on seismic reflection data, though in some areas the magnetic basement is shallower. The results also show that the depth to basement is not well resolved in areas with abundant intra-sedimentary igneous rocks. Further investigation is needed in such areas. Presented at the 2024 Australian Society of Exploration Geophysicists (ASEG) Discover Symposium

The Otway Basin is a broadly northwest-southeast trending basin and forms part of a rift system that developed along Australia’s southern margin. It represents an established hydrocarbon province with mostly onshore and shallow-water offshore discoveries. However, the outboard deep-water Otway Basin, with water depths up to 6300 m, is comparatively underexplored and can be considered a frontier area. Following the completion of a basin-wide seismic depth-imaging program (Part 1; Lee et al 2021) and insights from the revised seismic interpretation (Part 2; Karvelas et al. 2021), we have developed a comprehensive petroleum system modelling (PSM) study by integrating these data and findings (Part 3). Together the studies have resulted in an improved understanding of the hydrocarbon prospectivity of the deep-water areas of the basin. Given the sparsity of data outboard, almost all legacy petroleum system modelling studies have been focused either on the onshore or shallow-water areas of the basin and primarily on their thick Lower Cretaceous depocentres. The limitations of legacy seismic datasets resulted in a high degree of uncertainty in the derivative interpretations used as input into PSM studies. In addition, the paucity and poor quality of data in the deep-water area reduced confidence in the understanding of the basin evolution and spatial distribution of depositional environments through time. The newly acquired 2D seismic survey and reprocessed legacy data, with calibration via several wells across the basin, has improved confidence in our understanding of the tectonostratigraphic evolution of the basin (Part 2; Karvelas et al. 2021). The study presented herein integrates products from the work in Part 2 into a petroleum system model with the primary objective being to better understand the petroleum systems across the deep-water Otway Basin.

In association with the OB2020 seismic survey, over 8,200 line kilometre of gravity and magnetic data were acquired. These data were subsequently merged with existing satellite data to produce merged grids at 1000m grid cell size. Several enhancement processing techniques were applied to these magnetic and gravity data to better highlight buried features within the Otway Basin. The merged input data from the survey and the enhanced products in this release provide valuable information on the geometry and spatial extent of igneous rocks in the deep-water basin. The distribution of these rocks is critical to the understanding of the petroleum systems and therefore the hydrocarbon prospectivity of the area. This data package contains: 1) A metadata statement document 2) Shapefiles of the magnetic and gravity line data from the OBSP survey 3) ASCII xyz grids of the OBSP and merged grids with public domain data 4) Georeferenced (GeoTIFF) images of the survey and merged grids 5) Gravity and Magnetic data processing reports from the OBSP survey

Geoscience Australia has undertaken a regional seismic mapping study of the offshore Otway Basin extending across the explored inner basin to the frontier deep-water region. Seismic interpretation covers over 18,000 line-km of new and reprocessed data acquired in the 2020 Otway Basin seismic program, over 40,000 line-km of legacy 2D seismic data and GA’s new 2023 Otway 3D post-stack Mega Merge seismic dataset. This work provides a new perspective on regional structural architecture and basin evolution and has important implications for hydrocarbon prospectivity of this region. This seminar was two short talks centring on the Otway Basin. <u>Post-stack 3D merging to fast-track regional interpretation - offshore Otway Basin case study, presented by Merrie-Ellen Gunning</u> This case study was to produce a regularised and seamless 3D dataset of the highest possible quality, for the offshore Otway Basin, within two-months. The input migrated volumes varied by data extent, migration methodology, angle range and grid orientation. Fourteen input volumes totalling 8,092 km2 were post-stack merged and processed to produce a continuous and consistent volume, enabling more efficient and effective interpretation of the region. The surveys were regularised onto a common grid, optimised for structural trend, prior to survey matching. A mis-tie analysis algorithm, applied over a time window optimised for interpretation of key events, was used to derive corrections for timing, phase and amplitude, using a reference. This was followed by time-variant spectral and amplitude matching to improve continuity between volumes. Additional enhancements including noise removal and lateral amplitude scaling were also applied. The final merged volume offers significant uplift over the inputs, providing better imaging of structure and events and dramatically improving the efficiency and quality of interpretation. This enables rapid reconnaissance of the area by explorers. <u>Structural architecture of the offshore Otway Basin presented by Chris Nicholson</u> We present new basin-scale isochore maps that show the distribution of the Cretaceous depocentres. Maps for the Lower Cretaceous Crayfish and Eumeralla supersequences, together with those recently published for the Upper Cretaceous Shipwreck and Sherbrook Supersequences, completes the set of isochore maps for the main tectonostratigraphic basin intervals. Mapping of basement involved faults has revealed structural fabrics that have influenced depocentre development. The tectonostratigraphic development of depocentres and maps of deep crustal units delineate crustal thinning trends related to late Cretaceous extension phases. This work highlights the need to review and update structural elements. For example, the boundary between the Otway and Sorell basins is now geologically constrained. The refinements to the tectonostratigraphic evolution of the Otway Basin presented here have important implications for the distribution and potential maturity of petroleum systems, especially with regard to heat flow associated with crustal extension.

Exploring for the Future (EFTF) is a multiyear (2016–2024) initiative of the Australian Government, conducted by Geoscience Australia. This program aims to improve Australia’s desirability for industry investment in resource exploration of frontier regions across Australia. This paper will focus on the science impacts from the EFTF program in northern Australia derived from the acquisition and interpretation of seismic surveys, the drilling of the NDI Carrara 1 and also complementary scientific analysis and interpretation to determine the resource potential of the region. This work was undertaken in collaboration with the Northern Territory Geological Survey, the Queensland Geological Survey, AuScope and the MinEx CRC. These new data link the highly prospective resource rich areas of the McArthur Basin and Mt Isa Province via a continuous seismic traverse across central northern Australia. The Exploring for the Future program aims to further de-risk exploration within greenfield regions and position northern Australia for future exploration investment. [Carr] The Sherbrook Supersequence is the youngest of four Cretaceous supersequences in the Otway Basin and was deposited during a phase of crustal extension. This presentation shows how a basin-scale gross depositional environment (GDE) map for the Sherbrook SS was constructed, the significance of the map for the Austral 3 petroleum system, and why GDE mapping is important for pre-competitive basin studies at Geoscience Australia. [Abbott]

The Shipwreck and Sherbrook supersequences together constitute the upper Cretaceous succession in the Otway Basin that was deposited during an extensional basin phase. In the Shipwreck Trough, where the upper Cretaceous succession is well explored, gas fields are hosted by the Shipwreck Supersequence (SS). Elsewhere, the upper Cretaceous interval is lightly explored, and the deep-water area is considered an exploration frontier. We present regional gross depositional environment (RGDE) maps for the LC1.1 and LC1.2 sequences of the Shipwreck SS, and the LC2 Sherbrook SS. Fluvial Plain, Coastal-Delta Plain and Shelf RGDEs were interpreted from wireline logs, cores, and seismic facies. The Fluvial Plain and Coastal-Delta Plain RGDEs are mostly restricted to the inboard platform areas and the inner Morum Sub-basin. The mud-prone Shelf RGDE is widespread across the deep-water Morum and Nelson depocentres. The extent of the Fluvial and Coastal-Delta Plain belts progressively increases up-section, imparting a regressive aspect to the succession, and delineating a large fluvial-deltaic complex in the north-west of the basin. Thick seal development across the greater Shipwreck Trough, potentially mature source rocks in the deep-water basin, and thick reservoir development in the hanging wall of growth faults in the inner Morum Sub-basin are insights derived from this study, and will inform area selection for detailed gross depositional environment mapping, formulation of new hydrocarbon and carbon dioxide storage plays, and inputs for petroleum systems modelling. Presented at the Australian Energy Producers (AEP) Conference & Exhibition (https://energyproducersconference.au/conference/)

Reports of bitumen stranding on the ocean beaches of southern Australia date back to the early days of European settlement. Previous investigations have shown that this ‘coastal bitumen’ comprises three categories of stranded petroleum: waxy bitumen, asphaltite and oil slicks. All three varieties are physically and chemically distinct from each other, and bear no geochemical resemblance to any indigenous Australian crude oil. This study focuses on the most common variety, waxy bitumen, which accounted for 90% of the strandings on six South Australian beaches repeatedly surveyed during 1991–1992. Geochemical analysis of 96 individual specimens collected from these survey sites and other beaches in South Australia and western Victoria has shown them to be variously weathered high-wax crude oils of paraffinic to aromatic-intermediate bulk composition. Elemental, isotopic and biomarker differences allow their assignment to at least five oil families with inferred source facies that range from deep freshwater lacustrine through paludal and deltaic to euxinic marine, possibly deposited within different sedimentary basins. Family 1, 2 and 3 waxy bitumens all contain biomarkers derived from the freshwater alga Botryococcus sp. and tropical angiosperms (notably dipterocarps). Similar biomarker assemblages are unknown in Australian sedimentary basins but are common in Cenozoic crude oils and source rocks throughout western Indonesia. Family 4 waxy bitumens lack these biomarkers, but do contain dinosterane and 24-n-propylcholestane, indicative of a marine source affinity, while the carbon isotopic signatures and high pristane/phytane (Pr/Ph) ratios of Family 5 waxy bitumens are consistent with their origin from coal-rich source rocks deposited in fluvial to deltaic sedimentary successions. The majority of these waxy bitumens represent an oceanic influx of non-indigenous, Southeast Asian crude oils carried into the waters of southern Australia by the Leeuwin Current. Although they are likely to originate from natural seepage within the Indonesian Archipelago, it is unknown whether the parent oils emanate from submarine seeps or from inland seepages which are then carried to the sea by rivers. The common practice of tanker cleaning operations in the Java and Banda seas may augment the supply of natural bitumen to the beaches of Australia.

The inboard areas of the Otway Basin, particularly the Shipwreck Trough, are well explored and a petroleum-producing province. However, outboard in water depths greater than 500 m, the basin is underexplored with distant well control and sparse 2D reflection seismic data coverage. The presence of a successful petroleum province onshore and in shallow waters raises the question as to whether these plays may extend further outboard into the deep-water areas. In the deep-water area, structural complexity and poor imaging of events in the legacy seismic data have resulted in interpretation uncertainty and consequentially a high-risk profile for explorers. The 2020 Otway Basin seismic program acquired over 7000-line km of 2D reflection seismic data across the deep-water Otway Basin. In addition, over 10 000 km of legacy 2D seismic data were reprocessed to improve the tie between the inboard wells and the new seismic grid. This new dataset provides the first clear insight into the structural and stratigraphic framework of this frontier area, including better imaging of the sedimentary section and the lower crust, increased structural resolution and improved calibration of the outboard seismic reflectors via ties to the inboard wells. Interpretation of the new data has led to an improved assessment of the structural elements and the extension of regional supersequences into the deep-water areas. These refinements have been used as input into petroleum systems modelling work and will provide a foundation for future work to understand petroleum prospectivity, including the distribution of source, reservoir and seal facies. Presented at 2021 Australian Petroleum Production & Exploration Association (APPEA)