This map is part of a series which comprises 50 maps which covers the whole of Australia at a scale of 1:1 000 000 (1cm on a map represents 10km on the ground). Each standard map covers an area of 6 degrees longitude by 4 degrees latitude or about 590 kilometres east to west and about 440 kilometres from north to south. These maps depict natural and constructed features including transport infrastructure (roads, railway airports), hydrography, contours, hypsometric and bathymetric layers, localities and some administrative boundaries, making this a useful general reference map.

Moreton Bay 2009 LiDAR data was captured over the Moreton Bay Regional Council area between March and June 2009. The data was acquired by AAM Hatch (now AAMGroup) and funded by Queensland and Commonwealth governments. The project area covering 2440sqkm is licenced for use by all Commonwealth, State and Local Government organisations. Data acquisition and post-processing has been controlled to achieve a vertical accuracy witihn 0.15m (RMS, 68% CI) and horizontal accuracy within 0.45 m. Horizontal coordinates are based upon Map Grid of Australia (MGA) Zone 56 projection. Vertical coordinates are referenced to Australian Height Datum (AHD). The data was captured with point density of 2.5 points per square metre and the data is available as mass point files (ASCII, LAS) and ESRI GRID files with 1m grid spacing in 1km tiles.

Redland 2009 LiDAR survey was captured over the Redland City Council region between 25th March and 9th June 2009. The data was acquired by AAM Hatch (now AAMGroup) and funded by Queensland and Commonwealth governments. The data is licensed for use by all Commonwealth, State and Local Government. Data acquisition and post-processing has been controlled to achieve a vertical accuracy within 0.15m (RMS, 68% CI) and horizontal accuracy within 0.45 m. Horizontal coordinates are based upon Map Grid of Australia (MGA) Zone 56 projection. Vertical coordinates are referenced to Australian Height Datum (AHD). The data was captured with point density of 2.5 points per square metre and the data is available as mass point files (ASCII, LAS) and ESRI GRID files with 1m grid spacing in 1km tiles. The data are available as a number of surface types, products and formats including: mass points, digital elevation model (DEM) and hydrologically enforced DEM (HDEM) for the low lying coastal areas. Redland DEM forms part of the Brisbane HDEM which is a combination of the Brisbane 2009 LiDAR, Redland 2009 LiDAR, Moreton Bay 2009 LiDAR and Logan 2009 LiDAR survey areas.

South East Queensand (SEQ) 2009 LiDAR data was funded by Queensland Department of Environment and Resource management (DERM) , which was captured and delivered by AAMHatch between March 25th 2009 and June 9th 2009. The project area covering 5300 sqkm was divided into three sub areas, namely South East Queensland Priority Area, Gold Coast and the Balance of SEQ. Data acquisition and post-processing has been controlled to achieve a vertical accuracy witihn 0.15m (RMS, 68% CI) and horizontal accuracy within 0.45 m. Horizontal coordinates are based upon Map Grid of Australia (MGA) Zone 56 projection. Vertical coordinates are referenced to Australian Height Datum (AHD). The data was captured with point density of 2.5 points per square metre and the data is available as mass point files (ASCII, LAS) and ESRI GRID files with 1m grid spacing in 1km tiles and inundation contours (0.25m). A hydrologically conditioned and drainage enforced 2m DEM or HDEM has also been developed in 2010 as part of the Urban DEM project managed by the CRC for Spatial Information and Geoscience Australia. The HDEM was produced by SKM using the ANUDEM program. Hydrologic enforcement and conditioning has included the testing of data for sinks, the referencing of transport and hydrology vector layers for intersections and flow, and the use of high-resolution imagery for visual validation. The methodology for hydrologic enforcement has required deriving a stream network based on flow direction and accumulation, using TIN and ANUDEM processes to analyse sinks and artificial damming affects caused by objects such as roads, bridges and trees which have not been previously filtered. Break lines have been included via the insertion of culvert/drainage channels, which has been used to interpolate these features into the main DEM as descending grid values. All data are referenced to GDA94/MGA Zone 56.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.

This map is part of the series that covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 513 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and 110 kilometres from north to south. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. The topographic map and data index shows coverage of the sheets. Product Specifications Coverage: The series covers the whole of Australia with 513 maps. Currency: Ranges from 1995 to 2009. 95% of maps have a reliability date of 1994 or later. Coordinates: Geographical and either AMG or MGA (post-1993) Datum: AGD66, GDA94, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Paper, flat and folded copies.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.

At this scale 1cm on the map represents 1km on the ground. Each map covers a minimum area of 0.5 degrees longitude by 0.5 degrees latitude or about 54 kilometres by 54 kilometres. The contour interval is 20 metres.