The Surface Hydrology Points (Regional) dataset provides a set of related features classes to be used as the basis of the production of consistent hydrological information. This dataset contains a geometric representation of major hydrographic point elements - both natural and artificial. This dataset is the best available data supplied by Jurisdictions and aggregated by Geoscience Australia it is intended for defining hydrological features.

Islands in the Pacific region rely heavily on their fresh groundwater, and for a number of islands it is the only reliable source of freshwater throughout the year. Stresses on groundwater resources in many Pacific Island countries are set to escalate in the future with projected population and economic growth. In addition, there are likely to be future climate impacts on groundwater availability and quality. Although a number of studies have been undertaken at a local scale, very limited information is available to consider the impacts of future climates on groundwater systems at a regional scale. This project provides a first-pass regional-scale assessment of the relative potential vulnerability of groundwater to: (i) low rainfall periods and (ii) mean sea-level rise for 15 Pacific Island countries and territories. The dataset associated with this report can be obtained from www.ga.gov.au using title "Pacific Island Groundwater Vulnerability to Future Climates Dataset" or catalogue number 81575.

Geoscience Australia (GA) was invited by Murray-Darling Basin Authority (MDBA) in 2010 to participate in an evaluation of the Intermap IFSAR (Interferometric Synthetic Aperture RADAR) data that was acquired as part of the Murray-Darling Basin Information Infrastructure Project Stage 1 (MDBIIP1) in 2009. This evaluation will feed into the business case for Stage 2 of the project. As part of the evaluation GA undertook the following: 1. A comparison of the IFSAR Digital Surface Model (DSM) and Digital Terrain Model (DTM) with a recent LiDAR acquisition, covering approximately 9000Km2 of the Lower Darling Region. It focused on assessment of the data over various land cover and terrain types and identified opportunities and issues with integrating IFSAR with LiDAR. 2. A comparison of the IFSAR Vegetation Canopy Surface (DSM minus DTM) with the Lower Darling LiDAR Canopy Elevation Model (CEM). 3. A comparison between currently mapped man-made and natural water bodies over the Murray-Darling Basin with the IFSAR derived products (water mask). 4. Application of the National Catchment Boundaries (NCBs) methodology to the IFSAR data and comparison with the delineated watersheds from PBS&J (Intermap's sub-contractor). This report outlines the findings of this evaluation based on the 4 items above MDBA requested.

An area of about 12,000 square miles was mapped in the field seasons 1950-51. It contains four Pre-Cambrian rock groups ranging from Archaeozoic to Uppermost Proterozoic. The main groups in the area, the Mt. Isa and Lawn Hill Groups, are shallow-water geosynclinal sediments involved in a Proterozoic orogeny which resulted in fairly intensive folding along dominantly north-south axes, together with much faulting. The geological features discussed in this report include physiography, topography, stratigraphy, igneous activity, structure, mineral deposits and water supply.

With Australia's postwar immigration programme and the increased demand for food supplies, an expansion of Australia's rural industries is of primary importance, both to increase domestic food supplies and to obtain foreign exchange by export of primary produce. For such a development, the rainfall, surface and underground water resources are the factors of prime importance. In West Australia the difficulties met in finding water for farming purposes prevents rational development of many rural areas. Also, in some places town water supplies are insufficient or the water is saline. Water resources may be classified as follow: rain water from tanks or dams, water from bores or wells, water from old mine shafts (in mining districts), water from springs, [and] water from rivers. The present investigations are not concerned with the last two types of water supply. The following aims were set. 1. To test several types of instruments, to discover their limitations and ranges and the optimum conditions for their operations. 2. To estimate the accuracy of depth determination to discontinuities which might be related to the geology. 3. To investigate the possibility of distinguishing the nature of the discontinuities, for instance, decomposed granite, fresh granite, ground water level, etc., and the possibility of estimating whether ground water is fresh, brackish or saline. The tests areas were selected in the belief that sufficient bore information would be available to serve as controls. However, except at Austin Downs, near Cue, and at Big Bell, the bore information was generally insufficient, vague and unreliable. With the exceptions mentioned above, adequate records had not been kept. The purpose of the geophysical survey was not primarily to search for areas with favourable ground water occurrences but to test the resistivity method in areas where information on the occurrence of ground water was available from existing wells and bores. The order in which the tests are described in the report is: Wubin, Cue, Big Bell, Lake Grace and Kulkin.

On May 3rd, and again on June 1st, the author visited the Cotter dam to investigate a reported loss of water from the fault on the northern side of the wall. This report gives an account of these visits, together with the author's observations and conclusions in relation to the reported water loss.

This dataset maps the geomorphic habitat environments (facies) for 36 South Australian coastal waterways. The classification system contains 12 easily identifiable and representative environments: Barrier/back-barrier, Bedrock, Central Basin, Channel, Coral, Flood- and Ebb-tide Delta, Fluvial (bay-head) Delta, Intertidal Flats, Mangrove, Rocky Reef, Saltmarsh/Saltflat, Tidal Sand Banks (and Unassigned). These types represent habitats found across all coastal systems in Australia. Most of the 36 coastal waterways have a "Modified" environmental condition (as opposed to "Near Pristine"), according to the National Land and Water Resources Audit definition.

This dataset maps the geomorphic habitat environments (facies) for 213 Queensland coastal waterways. This version of the dataset includes 73 newly mapped estuaries, classified as 'Near pristine'. The classification system contains 12 easily identifiable and representative environments: Barrier/back-barrier, Bedrock, Central Basin, Channel, Coral, Flood- and Ebb-tide Delta, Fluvial (bay-head) Delta, Intertidal Flats, Mangrove, Rocky Reef, Saltmarsh/Saltflat, Tidal Sand Banks (and Unassigned). These types represent habitats found across all coastal systems in Australia. Southern and central Great Barrier Reef lagoon coasts have a broad spectrum of river, tide and wave- dominated estuaries.

This document represents part of Geoscience Australia's contribution to the National Estuaries Assessment and Management (NE) project, Theme 5 (Assessment and Monitoring), Task 5A 'Conceptual Models of Australian Estuaries and Coastal Waterways'. The report contains comprehensive conceptual models of the biophysical processes that operate in a wide range of estuaries and coastal waterways found around Australia. Geomorphic conceptual models have been developed for each of the seven types of Australian estuaries and coastal waterways. Each conceptual model comprises a three-dimensional block diagram depicting detailed summaries of the structure, evolutionary characteristics, and geomorphology of each coastal waterway type, which are ?overlain? by flow diagrams that depict some of the important biotic and abiotic processes, namely: hydrology, sediment dynamics, and nutrient dynamics. Geomorphology was used as the common 'base layer' in the conceptual models, because sediment is the fundamental, underlying substrate upon which all other estuarine processes depend and operate. In the conceptual models, wave-dominated systems are depicted as having a relatively narrow entrance that restricts marine flushing, and low water-column turbidity except during extreme events. Tide-dominated systems feature relatively wide entrances, which likely promote efficient marine flushing, very large relative areas of intertidal habitats, and naturally high turbidity due to strong turbulence induced by tidal currents. Strong evidence exists suggesting that estuaries (both wave- and tide-dominated) are the most efficient 'traps' for terrigenous and marine sediments, and these are depicted as providing the most significant potential for trapping and processing of terrigenous nutrient loads. Intertidal areas, such as mangroves and saltmarshes, and also the central basins of wave-dominated estuaries and coastal lagoons, are likely to accumulate the majority of trapped sediments and nutrients. Conceptual model diagrams, with overlays representing environmental processes, can be used as part of a decision support system for environmental managers, and as a tool for comparative assessment in which a more integrative and shared vision of the relationship between components in an ecosystem can be applied.

A detailed analysis of aquifer systems in the Broken Hill Managed Aquifer Recharge priority areas has clarified our understanding of key components of the aquifer systems. Of the priority areas examined in detail, the aquifers located in the Darling Floodplain are considered to have the greatest potential for developing Managed Aquifer Recharge (MAR) options and for hosting significant volumes of previously undefined fresh and brackish groundwaters with low levels of allocation, thereby assisting the larger strategic effort aimed at identifying significant water-saving measures for the Darling River system.