The Mesoproterozoic South Nicholson Basin sits between, and overlies, the Paleoproterozoic Mount Isa Province to the east and the southern McArthur Basin to the northwest. The McArthur Basin and Mount Isa Province are well studied and highly prospective for both mineral and energy resources. In contrast, rocks in the South Nicholson region (incorporating the Mount Isa Province, the Lawn Hill Platform and the South Nicholson Basin, and geographically straddling the Northern Territory and Queensland border) are mostly undercover, little studied and consequently relatively poorly understood. A comprehensive U-Pb sensitive high-resolution ion microprobe (SHRIMP) zircon and xenotime geochronology program was undertaken to better understand the stratigraphy of the South Nicholson region and its relationship to the adjacent, more overtly prospective Mount Isa Province and McArthur Basin. The age data indicate that South Nicholson Basin deposition commenced ca. 1483 Ma, with cessation at least by ca. 1266 Ma. The latter age, based on U-Pb xenotime, is interpreted as the timing of postdiagenetic regional fluid flow. The geochronology presented here provides the first direct age data confirming that the South Nicholson Group is broadly contemporaneous with the Roper Group of the McArthur Basin. Some rocks, mapped previously as Mesoproterozoic South Nicholson Group and comprising proximal, immature lithofacies, have detrital spectra consistent with that of the late Paleoproterozoic McNamara Group of the western Mount Isa Province; this will necessitate a revision of existing regional stratigraphic relationships. The stratigraphic revisions and correlations proposed here significantly expand the extent of highly prospective late Paleoproterozoic stratigraphy across the South Nicholson region, which, possibly, extends even further west beneath the Georgina and Carpentaria basins. Our data and conclusions allow improved regional stratigraphic correlations between Proterozoic basins, improved commodity prospectivity and targeted exploration strategies across northern Australia. <b>Citation:</b> Carson, C.J., Kositcin, N., Anderson, J.R., Cross, A. and Henson, P.A., 2020. New U–Pb geochronology for the South Nicholson region and implications for stratigraphic correlations.. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

The AusAEM1 survey is the world’s largest airborne electromagnetic survey flown to date, extending across an area exceeding 1.1 million km2 over Queensland and the Northern Territory. Approximately 60 000 line kilometres of data were acquired at a nominal line spacing of 20 km. Using this dataset, we interpreted the depth to chronostratigraphic surfaces, assembled stratigraphic relationship information, and delineated structural and electrically conductive features. Our results improved understanding of upper-crustal geology, led to 3D mapping of palaeovalleys, prompted further investigation of electrical conductors and their relationship to structural features and mineralisation, and helped us continuously connect correlative outcropping units separated by up to hundreds of kilometres. Our interpretation is designed to improve targeting and outcomes for mineral, energy and groundwater exploration, and contributes to our understanding of the chronostratigraphic, structural and upper-crustal evolution of northern Australia. More than 150 000 regional depth measurements, each attributed with detailed geological information, are an important step towards a national geological framework, and offer a regional context for more detailed, smaller-scale AEM surveys. <b>Citation:</b> Wong, S.C.T., Roach, I.C., Nicoll, M.G., English, P.M., Bonnardot, M.-A., Brodie, R.C., Rollet, N. and Ley-Cooper, A.Y., 2020. Interpretation of the AusAEM1: insights from the world’s largest airborne electromagnetic survey. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

The ‘Australia’s Future Energy Resources’ (AFER) project is a four-year multidisciplinary investigation of the potential energy commodity resources in selected onshore sedimentary basins. The resource assessment component of the project incorporates a series of stacked sedimentary basins in the greater Pedirka-western Eromanga region in eastern central Australia. Using newly reprocessed seismic data and applying spatially enabled, exploration play-based mapping tools, a suite of energy commodity resources have been assessed for their relative prospectivity. One important aspects of this study has been the expansion of the hydrocarbon resource assessment work flow to include the evaluation of geological storage of carbon dioxide (GSC) opportunities. This form of resource assessment is likely to be applied as a template for future exploration and resource development, since the storage of greenhouse gases has become paramount in achieving the net-zero emissions target. It is anticipated that the AFER project will be able to highlight future exploration opportunities that match the requirement to place the Australian economy firmly on the path of decarbonisation.

The document summarises new seismic interpretation metadata for two key horizons from Base Jurassic to mid-Cretaceous strata across the western and central Eromanga Basin, and the underlying Top pre-Permian unconformity. New seismic interpretations were completed during a collaborative study between the National Groundwater Systems (NGS) and Australian Future Energy Resources (AFER) projects. The NGS and AFER projects are part of Exploring for the Future (EFTF)—an eight year, $225 million Australian Government funded geoscience data and precompetitive information acquisition program to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This will help support a strong economy, resilient society and sustainable environment for the benefit of all Australians. The EFTF program is supporting Australia’s transition to a low emissions economy, industry and agriculture sectors, as well as economic opportunities and social benefits for Australia’s regional and remote communities. Further details are available at http://www.ga.gov.au/eftf. The seismic interpretations build on previous work undertaken as part of the ‘Assessing the Status of Groundwater in the Great Artesian Basin’ (GAB) Project, commissioned by the Australian Government through the National Water Infrastructure Fund – Expansion (Norton & Rollet, 2022; Vizy & Rollet, 2022; Rollet et al., 2022; Rollet et al., in press.), the NGS Project (Norton & Rollet, 2023; Rollet et al., 2023; Vizy & Rollet, 2023) and the AFER Project (Bradshaw et al., 2022 and in press, Bernecker et al., 2022, Iwanec et al., 2023; Iwanec et al., in press). The recent iteration of revisions to the GAB geological and hydrogeological surfaces (Vizy & Rollet, 2022) provides a framework to interpret various data sets consistently (e.g., boreholes, airborne electromagnetic, seismic data) and in a 3D domain, to improve our understanding of the aquifer geometry, and the lateral variation and connectivity in hydrostratigraphic units across the GAB (Rollet et al., 2022). Vizy and Rollet (2022) highlighted some areas with low confidence in the interpretation of the GAB where further data acquisition or interpretation may reduce uncertainty in the mapping. One of these areas was in the western and central Eromanga Basin. New seismic interpretations are being used in the western Eromanga, Pedirka and Simpson basins to produce time structure and isochore maps in support of play-based energy resource assessment under the AFER Project, as well as to update the geometry of key aquifers and aquitards and the GAB 3D model for future groundwater management under the NGS Project. These new seismic interpretations fill in some data and knowledge gaps necessary to update the geometry and depth of key geological and hydrogeological surfaces defined in a chronostratigraphic framework (Hannaford et al., 2022; Bradshaw et al., 2022 and in press; Hannaford & Rollet, 2023). The seismic interpretations are based on a compilation of newly reprocessed seismic data (Geoscience Australia, 2022), as part of the EFTF program, and legacy seismic surveys from various vintages brought together in a common project with matching parameters (tying, balancing, datum correcting, etc.). This dataset has contributed to a consolidated national data coverage to further delineate groundwater and energy systems, in common data standards and to be used further in integrated workflows of mineral, energy and groundwater assessment. The datasets associated with the product provides value added seismic interpretation in the form of seismic horizon point data for two horizons that will be used to improve correlation to existing studies in the region. The product also provides users with an efficient means to rapidly access a list of core data used from numerous sources in a consistent and cleaned format, all in a single package. The following datasets are provided with this product: 1) Seismic interpretation in a digital format (Appendix A), in two-way-time, on key horizons with publically accessible information, including seismic interpretation on newly reprocessed data: Top Cadna-owie; Base Jurassic; Top pre-Permian; 2) List of surveys compiled and standardised for a consistent interpretation across the study area (Appendix B). 3) Isochore points between Top Cadna-owie and Base Jurassic (CC10-LU00) surfaces (Appendix C). 4) Geographical layer for the seismic lines compiled across Queensland, South Australia and the Northern Territory (Appendix D). These new interpretations will be used to refine the GAB geological and hydrogeological surfaces in this region and to support play-based energy resource assessments in the western Eromanga, Pedirka and Simpson basins.

This report, completed as part of Geoscience Australia’s Exploring for the Future Program National Groundwater Systems (NGS) Project, presents results of the second iteration of 3D geological and hydrogeological surfaces across eastern Australian basins. The NGS project is part of the Exploring for the Future (EFTF) program—an eight-year, $225 million Australian Government funded geoscience data and precompetitive information acquisition program. The program seeks to inform decision-making by government, community, and industry on the sustainable development of Australia's mineral, energy, and groundwater resources, including those to support the effective long-term management of GAB water resources. This work builds on the first iteration completed as part of the Great Artesian Basin Groundwater project. The datasets incorporate infills of data and knowledge gaps in the Great Artesian Basin (GAB), Lake Eyre Basin (LEB), Upper Darling Floodplain (UDF) and existing data in additional basins in eastern Australia. The study area extends from the offshore Gulf of Carpentaria in the north to the offshore Bight, Otway, and Gippsland basins in the South and from the western edge of the GAB in the west to the eastern Australian coastline to the east. The revisions are an update to the surface extents and thicknesses for 18 region-wide hydrogeological units produced by Vizy & Rollet, 2022. The second iteration of the 3D model surfaces further unifies geology across borders and provides the basis for a consistent hydrogeological framework at a basin-wide, and towards a national-wide, scale. The stratigraphic nomenclature used follows geological unit subdivisions applied: (1) in the Surat Cumulative Management Area (OGIA - Office of Groundwater Impact Assessment, 2019) to correlate time equivalent regional hydrogeological units in the GAB and other Jurassic and Cretaceous time equivalent basins in the study area and (2) in the LEB to correlate Cenozoic time equivalents in the study area. Triassic to Permian and older basins distribution and thicknesses are provided without any geological and hydrogeological unit sub-division. Such work helps to (1) reconcile legacy and contemporary regional studies under a common stratigraphic framework, (2) support the effective management of groundwater resources, and (3) provide a regional geological context for integrated resource assessments. The 18 hydrogeological units were constructed using legacy borehole data, 2D seismic and airborne electromagnetic (AEM) data that were compiled for the first iteration of the geological and hydrogeological surfaces under the GAB groundwater project (Vizy & Rollet, 2022a) with the addition of: • New data collected and QC’d from boreholes (including petroleum, CSG [Coal Seam Gas], stratigraphic, mineral and water boreholes) across Australia (Vizy & Rollet, 2023a) since the first iteration, including revised stratigraphic correlations filling data and knowledge gaps in the GAB, LEB, UDF region (Norton & Rollet, 2023) with revised palynological constraints (Hannaford & Rollet 2023), • Additional AEM interpretation since the first iteration in the GAB, particularly in the northern Surat (McPherson et al., 2022b), as well as in the LEB (Evans et al., in prep), in the southern Eromanga Basin (Wong et al., 2023) and in the UDF region (McPherson et al., 2022c), and • Additional 2D seismic interpretation in the Gulf of Carpentaria (Vizy & Rollet, 2023b) and in the western and central Eromanga Basin (Szczepaniak et al., 2023). These datasets were then analysed and interpreted in a common 3D domain using a consistent chronostratigraphic framework tied to the geological timescale of 2020, as defined by Hannaford et al. (2022). Confidence maps were also produced to highlight areas that need further investigation due to data gaps, in areas where better seismic depth conversion or improved well formation picks are required. New interpretations from the second iteration of the 18 surfaces include (1) new consistent and regionally continuous surfaces of Cenozoic down to Permian and older sediments beyond the extent of the GAB across eastern Australia, (2) revised extents and thicknesses of Jurassic and Cretaceous units in the GAB, including those based on distributed thickness, (3) revised extents and thicknesses of Cenozoic LEB units constrained by the underlying GAB 3D model surfaces geometry. These data constraints were not used in the model surfaces generated for the LEB detailed inventory (Evans et al., 2023), and (4) refinements of surfaces due to additional seismic and AEM interpretation used to infill data and knowledge gaps. Significant revisions include: • The use of additional seismic data to better constrain the base of the Poolowanna-Evergreen formations and equivalents and the top of Cadna-owie Formation and equivalents in the western and central Eromanga Basin, and the extent and thicknesses of the GAB units and Cenozoic Karumba Basin in the Gulf of Carpentaria, • The use of AEM interpretations to refine the geometry of outcropping units in the northern Surat Basin and the basement surface underneath the UDF region, and • A continuous 3D geological surface of base Cenozoic sediments across eastern Australia including additional constraints for the Lake Eyre Basin (borehole stratigraphy review), Murray Basin (AEM interpretation) and Karumba Basin (seismic interpretation). These revisions to the 18 geological and hydrogeological surfaces will help improve our understanding on the 3D spatial distribution of aquifers and aquitards across eastern Australia, from the groundwater recharge areas to the deep confined aquifers. These data compilations and information brought to a common national standard help improve hydrogeological conceptualisation of groundwater systems across multiple jurisdictions to assist water managers to support responsible groundwater management and secure groundwater into the future. These 3D geological and hydrogeological modelled surfaces also provide a tool for consistent data integration from multiple datasets. These modelled surfaces bring together variable data quality and coverage from different databases across state and territory jurisdictions. Data integration at various scale is important to assess potential impact of different water users and climate change. The 3D modelled surfaces can be used as a consistent framework to map current groundwater knowledge at a national scale and help highlight critical groundwater areas for long-term monitoring of potential impacts on local communities and Groundwater Dependant Ecosystems. The distribution and confidence on data points used in the current iteration of the modelled surfaces highlight where data poor areas may need further data acquisition or additional interpretation to increase confidence in the aquifers and aquitards geometry. The second iteration of surfaces highlights where further improvements can be made, notably for areas in the offshore Gulf of Carpentaria with further seismic interpretation to better constrain the base of the Aptian marine incursion (to better constrain the shape and offshore extent of the main aquifers). Inclusion of more recent studies in the offshore southern and eastern margins of Australia will improve the resolution and confidence of the surfaces, up to the edge of the Australian continental shelf. Revision of the borehole stratigraphy will need to continue where more recent data and understanding exist to improve confidence in the aquifer and aquitard geometry and provide better constraints for AEM and seismic interpretation, such as in the onshore Carpentaria, Clarence-Moreton, Sydney, Murray-Darling basins. Similarly adding new seismic and AEM interpretation recently acquired and reprocessed, such as in the eastern Eromanga Basin over the Galilee Basin, would improve confidence in the surfaces in this area. Also, additional age constraints in formations that span large periods of time would help provide greater confidence to formation sub-divisions that are time equivalent to known geological units that correlate to major aquifers and aquitards in adjacent basins, such as within the Late Jurassic‒Early Cretaceous in the Eromanga and Carpentaria basins. Finally, incorporating major faults and structures would provide greater definition of the geological and hydrogeological surfaces to inform with greater confidence fluid flow pathways in the study area. This report is associated with a data package including (Appendix A – Supplementary material): • Nineteen geological and hydrogeological surfaces from the Base Permo-Carboniferous, Top Permian, Base Jurassic, Base Cenozoic to the surface (Table 1.1), • Twenty-one geological and hydrogeological unit thickness maps from the top crystalline basement to the surface (Figure 3.1 to Figure 3.21), • The formation picks and constraining data points (i.e., from boreholes, seismic, AEM and outcrops) compiled and used for gridding each surface (Table 2.7). Detailed explanation of methodology and processing is described in the associated report (Vizy & Rollet, 2023).

Effective mineral, energy and groundwater resource management and exploration rely on accurate geological maps. While geological maps of the surface exist and increase in resolution, maps of the subsurface are sparse, and the underpinning geological and geophysical constraints are disordered or non-existent. The Estimates of Geological and Geophysical Surfaces (EGGS) database seeks to enable robust subsurface geological mapping by establishing an ordered collection of precious geological and geophysical interpretations of the subsurface. EGGS stores the depth to geological boundaries derived from boreholes as well as interpretations of depth to magnetic top assessments, airborne electromagnetics inversions and reflection seismic profiles. Since geological interpretation is iterative, links to geophysical datasets and processing streams used to image the subsurface are stored. These metadata allow interpretations to be readily associated with the datasets from which they are derived and re-examined. The geological basis for the interpretation is also recorded. Stratigraphic consistency is maintained by linking each interpretation to the Australian Stratigraphic Units Database. As part of the Exploring for the Future program, >170 000 points were entered into the EGGS database. These points underpin construction of cover thickness models and economic fairway assessments. <b>Citation:</b> Mathews, E.J., Czarnota, K., Meixner, A.J., Bonnardot, M.-A., Curtis, C., Wilford, J., Nicoll, M.G., Wong, S.C.T., Thorose, M. and Ley-Cooper, Y., 2020. Putting all your EGGS in one basket: the Estimates of Geological and Geophysical Surfaces database. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

A key challenge in exploring Australian onshore sedimentary basins is limited seismic data coverage. Consequently, well logs are often the main datasets that can be used to understand the subsurface geology. The primary aim of this study was to develop a methodology for visualising the three-dimensional (3D) tectonostratigraphic architecture of sedimentary basins using well data, which can then be used to quickly screen areas warranting more detailed studies of resource potential. This project has developed a workflow that generates 3D well correlations using sequence stratigraphic well tops to visualise the regional structural and stratigraphic architecture of the Amadeus, Canning, Officer and Georgina basins in the Centralian Superbasin. Thirteen Neoproterozoic‒Paleozoic supersequence tops were interpreted in 134 wells. Three-dimensional well correlations provide an effective regional visualisation of the tectonostratigraphic architecture across the main depocentres. This study redefines the Centralian Superbasin as encompassing all western, northern and central Australian basins that had episodically interconnected depositional systems driven by regional subsidence during one or more regional tectonic events between the Neoproterozoic and middle Carboniferous. The Centralian Superbasin began to form during Neoproterozoic extension, and underwent several phases of partial or complete disconnection and subsequent reconnection of depositional systems during various regional tectonic events before final separation of depocentres at the culmination of the Alice Springs Orogeny. Regional 3D correlation diagrams have been generated to show the spatial distribution of these supersequences, which can be used to visualise the distribution of stratigraphic elements associated with petroleum, mineral and groundwater systems. <b>Citation: </b>Bradshaw, B., Khider, K., MacFarlane, S., Rollet, N., Carr, L. and Henson, P., 2020. Tectonostratigraphic evolution of the Centralian Superbasin (Australia) revealed by three-dimensional well correlations. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

The AusAEM1 airborne electromagnetic survey extends across an area exceeding 1.1 million km2 over Queensland and the Northern Territory. Approximately 60,000 line kilometres of data were acquired at a nominal line spacing of 20 km (Ley-Cooper et al., 2020). To improve targeting and outcomes for mineral, energy and groundwater exploration, we conducted a regional interpretation of this dataset to characterise the subsurface geology of northern Australia. The interpretation includes the depth to chronostratigraphic surfaces, compilation of stratigraphic relationship information, and delineation of structural and electrically conductive features. In addition to help connecting correlative outcropping units separated by up to hundreds of kilometres, the results led to 3D mapping of palaeovalleys and prompted further investigation of electrical conductors and their relationship to structural features and mineralisation. Approximately 200,000 regional depth point measurements, each attributed with detailed geological information, are an important step towards a national geological framework, and offer a regional context for more detailed, smaller-scale AEM surveys. Refer to Wong et al., (2020) for more details on the AusAEM1 interpretation.

<div> A key issue for explorers in Australia is the abundant sedimentary and regolith cover obscuring access to underlying potentially prospective rocks. &nbsp;Multilayered chronostratigraphic interpretation of regional broad line-spaced (~20&nbsp;km) airborne electromagnetic (AEM) conductivity sections have led to breakthroughs in Australia’s near-surface geoscience. &nbsp;A dedicated/systematic workflow has been developed to characterise the thickness of cover and the depth to basement rocks, by delineating contact geometries, and by capturing stratigraphic units, their ages and relationships. &nbsp;Results provide a fundamental geological framework, currently covering 27% of the Australian continent, or approximately 2,085,000&nbsp;km2. &nbsp;Delivery as precompetitive data in various non-proprietary formats and on various platforms ensures that these interpretations represent an enduring and meaningful contribution to academia, government and industry.&nbsp;The outputs support resource exploration, hazard mapping, environmental management, and uncertainty attribution.&nbsp;This work encourages exploration investment, can reduce exploration risks and costs, helps expand search area whilst aiding target identification, and allows users to make well-informed decisions. Presented herein are some key findings from interpretations in potentially prospective, yet in some cases, underexplored regions from around Australia.&nbsp;</div> This abstract was submitted & presented to the 8th International Airborne Electromagnetics Workshop (AEM2023) (https://www.aseg.org.au/news/aem-2023)

The structural evolution of the South Nicholson region is not well understood, hindering full appraisal of the resource potential across the region. Here, we outline new insights from a recent deep-reflection seismic survey, collected as part of the Australian Government’s Exploring for the Future initiative. The new seismic profiles, and new field observations and geochronology, indicate that the South Nicholson region was characterised by episodic development of a series of ENE-trending half grabens. These graben structures experienced two major episodes of extension, at ca. 1725 Ma and ca. 1640 Ma, broadly correlating with extensional events identified from the Lawn Hill Platform and the Mount Isa Province to the east. Southward stratal thickening of both Calvert and Isa Superbasin sequences (Paleoproterozoic Carrara Range and McNamara groups, respectively) into north-dipping bounding faults is consistent with syndepositional extension during half graben formation. Subsequent basin inversion, and reactivation of the half graben bounding faults as south-verging thrusts, appears to have been episodic. The observed geometry and offset are interpreted as the cumulative effect of multiple tectonic events, including the Isan Orogeny, with thrust movement on faults occurring until at least the Paleozoic Alice Springs Orogeny. <b>Citation:</b> Carson, C.J.. Henson, P.A., Doublier, M.P., Williams, B., Simmons, J., Hutton, L. and Close, D., 2020. Structural evolution of the South Nicholson region: insight from the 2017 L210 reflection seismic survey. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.