<div>The pyrolysis-gas chromatography database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) database and supporting oracle databases for open system pyrolysis-gas chromatography (pyrolysis-GC) analyses performed on either source rocks or kerogen samples taken from boreholes and field sites. Sedimentary rocks that contain organic matter are referred to as source rocks (e.g., organic-rich shale, oil shale and coal) and the organic matter within the rock matrix that is insoluble in organic solvents is named kerogen. The analyses are undertaken by various laboratories in service and exploration companies using a range of instruments. Data includes the borehole or field site location, sample depth, stratigraphy, analytical methods, other relevant metadata, and the molecular composition of the pyrolysates. The concentrations of the aliphatic hydrocarbon, aromatic hydrocarbon and organic sulfur compounds are given in several units of measure [e.g., percent (resolved compounds) in the S2 peak (wt% S2), milligrams per gram of rock (mg/g rock), micrograms per gram of kerogen (mg/g kerogen) etc.].</div><div><br></div><div>These data are used to determine the organic richness, kerogen type and thermal maturity of source rocks in sedimentary basins. The results are used as input parameters in basin analysis and petroleum systems modelling to evaluate the potential for hydrocarbon generation in a sedimentary basin. These data are collated from destructive analysis reports (DARs), well completion reports (WCRs) and literature. The data are delivered in the Source Rock Pyrolysis-Gas Chromatography web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div><div><br></div>

<div>The bulk oils database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for the bulk properties of petroleum liquids (e.g., condensate, crude oil, bitumen) sampled from boreholes and field sites. The analyses are performed by various laboratories in service and exploration companies, Australian government institutions, and universities using a range of instruments. Petroleum is composed primarily of hydrocarbons (carbon and hydrogen) with minor quantities of heterocyclic compounds containing either nitrogen, oxygen or sulfur. Data includes the borehole or field site location, sample depth, shows and tests, stratigraphy, analytical methods, other relevant metadata, and various data types including; API gravity, elemental composition and photographs of the samples. The stable carbon (¹³C/¹²C) and hydrogen (²H/¹H) isotopic ratios of crude oil and derivative saturated and aromatic hydrocarbon fractions are presented in parts per mil (‰) and in delta notation as &delta;¹³C and &delta;²H, respectively. Results are also included from methods that separate crude oils into bulk components, such as the quantification of saturated hydrocarbon, aromatic hydrocarbon, resin, and asphaltene (SARA) fractions according to their polarity.</div><div><br></div><div>These data provide information about the petroleum fluid’s composition, source, thermal maturity, secondary alteration, and fluid migration pathways. They are also useful for enhanced oil recovery assessments, petroleum systems mapping and basin modelling. Hence, these sample-based datasets are used for the discovery and evaluation of sediment-hosted resources. Some data are generated in Geoscience Australia’s laboratory and released in Geoscience Australia records. Data are also collated from destructive analysis reports (DARs), well completion reports (WCRs), and literature. The bulk oils data are delivered in the Petroleum Bulk Properties and Stable Isotopes web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

<div>The bulk source rock database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for the bulk properties of sedimentary rocks that contain organic matter and fluid inclusions taken from boreholes and field sites. The analyses are performed by various laboratories in service and exploration companies, Australian government institutions, and universities, using a range of instruments. Sedimentary rocks that contain organic matter are typically referred to as source rocks (e.g., organic-rich shale, oil shale and coal) and the organic matter within the rock matrix that is insoluble in organic solvents is named kerogen. Data includes the borehole or field site location, sample depth, stratigraphy, analytical methods, other relevant metadata, and various data types including; elemental composition, and the stable isotopes of carbon, hydrogen, nitrogen, and sulfur. Results are also included from methods that separate the extractable organic matter (EOM) from rocks into bulk components, such as the quantification of saturated hydrocarbon, aromatic hydrocarbon, resin and asphaltene (SARA) fractions according to their polarity. The stable carbon (¹³C/¹²C) and hydrogen (²H/¹H) isotopic ratios of the EOM and derivative hydrocarbon fractions, as well as fluid inclusion oils, are presented in delta notation (i.e., &delta;¹³C and &delta;²H) in parts per mil (‰) relative to the Vienna Peedee Belemnite (VPDB) standard.</div><div><br></div><div>These data are used to determine the molecular and isotopic compositions of organic matter within rocks and associated fluid inclusions and evaluate the potential for hydrocarbon generation in a basin. Some data are generated in Geoscience Australia’s laboratory and released in Geoscience Australia records. Data are also collated from destructive analysis reports (DARs), well completion reports (WCRs), and literature. The bulk data for sedimentary rocks are delivered in the Source Rock Bulk Properties and Stable Isotopes web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

<div>The soil gas database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for gas analyses undertaken by Geoscience Australia's laboratory on soil samples taken from shallow (down to 1 m below the surface) percussion holes. Data includes the percussion hole field site location, sample depth, analytical methods and other relevant metadata, as well as the molecular and isotopic compositions of the soil gas with air included in the reported results. Acquisition of the molecular compounds are by gas chromatography (GC) and the isotopic ratios by gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS). The concentrations of argon (Ar), carbon dioxide (CO₂), nitrogen (N₂) and oxygen (O₂) are given in mole percent (mol%). The concentrations of carbon monoxide (CO), helium (He), hydrogen (H₂) and methane (C₁, CH₄) are given in parts per million (ppm). Compound concentrations that are below detection limit (BDL) are reported as the value -99999. The stable carbon (¹³C/¹²C) and nitrogen (¹⁵N/¹⁴N) isotopic ratios are presented in parts per mil (‰) and in delta notation as δ¹³C and δ¹⁵N, respectively.</div><div><br></div><div>Determining the individual sources and migration pathways of the components of natural gases found in the near surface are useful in basin analysis with derived information being used to support exploration for energy resources (petroleum and hydrogen) and helium in Australian provinces. These data are collated from Geoscience Australia records with the results being delivered in the Soil Gas web services on the Geoscience Australia Data Discovery portal at https://portal.ga.gov.au which will be periodically updated.</div>

A regional hydrocarbon prospectivity study was undertaken in the onshore Canning Basin in Western Australia as part of the Exploring for the Future (EFTF) program, an Australian Government initiative dedicated to driving investment in resource exploration. As part of this program, significant work has been carried out to deliver new pre-competitive data including new seismic acquisition, drilling of stratigraphic wells and the geochemical analysis of geological samples recovered from exploration wells. A regional, 872 km long 2D seismic line (18GA-KB1) acquired in 2018 by Geoscience Australia (GA) and the Geological Survey of Western Australia (GSWA), images the Kidson Sub-basin of the Canning Basin. In order to provide a test of geological interpretations made from the Kidson seismic survey, a deep stratigraphic well, Barnicarndy 1, was drilled in 2019 in partnership between Geoscience Australia (GA) and the Geological Survey of Western Australia (GSWA) in the Barnicarndy Graben, 67 km west of Telfer, in the South West Canning Basin. Drilling recovered about 2100 m of continuous core from 580 mRT to the total driller’s depth (TD) of 2680.53 mRT (Normore and Rapaic, 2020). An extensive analytical program was carried out to characterise the lithology, age and depositional environment of these sediments. This included detailed organic geochemistry including isotopic and biomarker analyses of core samples. In order to determine the possible presence of organic contaminants in core samples that may jeopardise interpretation of results, manufactured products used during drilling and sample processing were identified as potential sources of hydrocarbon contamination and were investigated for their hydrocarbon content. In addition, in order to test if any hydrocarbon contamination was occurring due to contact with these manufactured products, water samples from the sumps and surface samples of drill muds from specific depths were collected and analysed as well.

<div>The fluid inclusion stratigraphy database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for Fluid Inclusion Stratigraphy (FIS) analyses performed by FIT, a Schlumberger Company (and predecessors), on fluid inclusions in rock samples taken from boreholes. Data includes the borehole location, sample depth, stratigraphy, analytical methods and other relevant metadata, as well as the mass spectrometry results presented as atomic mass units (amu) from 2 to 180 in parts per million (ppm) electron volts.</div><div> Fluid inclusions (FI) are microscopic samples of fluids trapped within minerals in the rock matrix and cementation phases. Hence, these FIS data record the bulk volatile chemistry of the fluid inclusions (i.e., water, gas, and/or oil) present in the rock sample and determine the relative abundance of the trapped compounds (e.g., in amu order, hydrogen, helium, methane, ethane, carbon dioxide, higher molecular weight aliphatic and aromatic hydrocarbons, and heterocyclic compounds containing nitrogen, oxygen or sulfur). The FI composition can be used to identify the presence of organic- (i.e., biogenic or thermogenic) and inorganic-sourced gases. These data provide information about fluid preservation, migration pathways and are used to evaluate the potential for hydrocarbon (i.e. dry gas, wet gas, oil) and non-hydrocarbon (e.g., hydrogen, helium) resources in a basin. These data are collated from Geoscience Australia records, destructive analysis reports (DARs) and well completion reports (WCRs), with the results being delivered in the Fluid Inclusion Stratigraphy (FIS) web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

<b>Organic Geochemistry (ORGCHEM) Schema. Australian Source Rock and Fluid Atlas</b> The databases tables held within Geoscience Australia's Oracle Organic Geochemistry (ORGCHEM) Schema, together with other supporting Oracle databases (e.g., Borehole database (BOREHOLE), Australian Stratigraphic Units Database (ASUD), and the Reservoir, Facies and Shows (RESFACS) database), underpin the Australian Source Rock and Fluid Atlas web services and publications. These products provide information in an Australia-wide geological context on organic geochemistry, organic petrology and stable isotope data related primarily to sedimentary rocks and energy (petroleum and hydrogen) sample-based datasets used for the discovery and evaluation of sediment-hosted resources. The sample data provide the spatial distribution of source rocks and their derived petroleum fluids (natural gas and crude oil) taken from boreholes and field sites in onshore and offshore Australian provinces. Sample depth, stratigraphy, analytical methods, and other relevant metadata are also supplied with the analytical results. Sedimentary rocks that contain organic matter are referred to as source rocks (e.g., organic-rich shale, oil shale and coal) and the organic matter within the rock matrix that is insoluble in organic solvents is named kerogen. The data in the ORGCHEM schema are produced by a wide range of destructive analytical techniques conducted on samples submitted by industry under legislative requirements, as well as on samples collected by research projects undertaken by Geoscience Australia, state and territory geological organisations and scientific institutions including the Commonwealth Scientific and Industrial Research Organisation (CSIRO) and universities. Data entered into the database tables are commonly sourced from both the basic and interpretive volumes of well completion reports (WCR) provided by the petroleum well operator to either the state and territory governments or, for offshore wells, to the Commonwealth Government under the Offshore Petroleum and Greenhouse Gas Storage Act (OPGGSA) 2006 and previous Petroleum (submerged Lands) Act (PSLA) 1967. Data are also sourced from analyses conducted by Geoscience Australia’s laboratory and its predecessor organisations, the Australian Geological Survey Organisation (AGSO) and the Bureau of Mineral Resources (BMR). Other open file data from company announcements and reports, scientific publications and university theses are captured. The ORGCHEM database was created in 1990 by the BMR in response to industry requests for organic geochemistry data, featuring pyrolysis, vitrinite reflectance and carbon isotopic data (Boreham, 1990). Funding from the Australian Petroleum Cooperative Research Centre (1991–2003) enabled the organic geochemical data to be made publicly available at no cost via the petroleum wells web page from 2002 and included BOREHOLE, ORGCHEM and the Reservoir, Facies and Shows (RESFACS) databases. Investment by the Australian Government in Geoscience Australia’s Exploring for the Future (EFTF) program facilitated technological upgrades and established the current web services (Edwards et al., 2020). The extensive scope of the ORGCHEM schema has led to the development of numerous database tables and web services tailored to visualise the various datasets related to sedimentary rocks, in particular source rocks, crude oils and natural gases within the petroleum systems framework. These web services offer pathways to access the wealth of information contained within the ORGCHEM schema. Web services that facilitate the characterisation of source rocks (and kerogen) comprise data generated from programmed pyrolysis (e.g., Hawk, Rock-Eval, Source Rock Analyser), pyrolysis-gas chromatography (Py-GC) and kinetics analyses, and organic petrological studies (e.g., quantitation of maceral groups and organoclasts, vitrinite reflectance measurements) using reflected light microscopy. Collectively, these data are used to establish the occurrence of source rocks and the post-burial thermal history of sedimentary basins to evaluate the potential for hydrocarbon generation. Other web services provide data to characterise source rock extracts (i.e., solvent extracted organic matter), fluid inclusions and petroleum (e.g., natural gas, crude oil, bitumen) through the reporting of their bulk properties (e.g., API gravity, elemental composition) and molecular composition using gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). Also reported are the stable isotope ratios of carbon, hydrogen, nitrogen, oxygen and sulfur using gas chromatography-isotope ratio mass spectrometry (GC-IRMS) and noble gas isotope abundances using ultimate high-resolution variable multicollection mass spectrometry. The stable isotopes of carbon, oxygen and strontium are also reported for sedimentary rocks containing carbonate either within the mineral matrix or in cements. Interpretation of these data enables the characterisation of petroleum source rocks and identification of their derived petroleum fluids, which comprise two key elements of petroleum systems analysis. Understanding a fluid’s physical properties and molecular composition are prerequisites for field development. The composition of petroleum determines its economic value and hence why the concentration of hydrocarbons (methane, wet gases, light and heavy oil) and hydrogen, helium and argon are important relative to those of nitrogen, carbon dioxide and hydrogen sulfide for gases, and heterocyclic compounds (nitrogen, oxygen or sulfur) found in the asphaltene, resin and polar fractions of crude oils. The web services and tools in the Geoscience Australia Data Discovery Portal (https://portal.ga.gov.au/), and specifically in the Source Rock and Fluid Atlas Persona (https://portal.ga.gov.au/persona/sra), allow the users to search, filter and select data based on various criteria, such as basin, formation, sample type, analysis type, and specific geochemical parameters. The web map services (WMS) and web feature services (WFS) enable the user to download data in a variety of formats (csv, Json, kml and shape file). The Source Rock and Fluid Atlas supports national resource assessments. The focus of the atlas is on the exploration and development of energy resources (i.e., petroleum and hydrogen) and the evaluation of resource commodities (i.e., helium and graphite). Some data held in the ORGCHEM tables are used for enhanced oil recovery and carbon capture, storage and utilisation projects. The objective of the atlas is to empower people to deliver Earth science excellence through data and digital capability. It benefits users who are interested in the exploration and development of Australia's energy resources by: • Providing a comprehensive and reliable source of information on the organic geochemistry of Australian source rocks • Enhancing the understanding of the spatial distribution, quality, and maturity of petroleum source rocks. • Facilitating the mapping of total petroleum and hydrogen systems and the assessment of the petroleum and hydrogen resource potential and prospectivity of Australian basins. • Facilitating the mapping of gases (e.g., methane, helium, carbon dioxide) within the geosphere as part of the transition to clean energy. • Enabling the integration and comparison of data from diverse sources and various acquisition methods, such as geological, geochemical, geophysical and geospatial data. • Providing data for integration into enhanced oil recovery and carbon capture, storage and utilisation projects. • Improving the accessibility and usability of data through user-friendly and interactive web-based interfaces. • Promoting the dissemination and sharing of data among Government, industry and community stakeholders. <b>References</b> Australian Petroleum Cooperative Research Centre (APCRC) 1991-2003. Australian Petroleum CRC (1991 - 2003), viewed 6 May 2024, https://www.eoas.info/bib/ASBS00862.htm and https://www.eoas.info/biogs/A001918b.htm#pub-resources Boreham, C. 1990. ORGCHEM Organic geochemical database. BMR Research Newsletter 13. Record 13:10-10. Geoscience Australia, Canberra. https://pid.geoscience.gov.au/dataset/ga/90326 Edwards, D.S., MacFarlane, S., Grosjean, E., Buckler, T., Boreham, C.J., Henson, P., Cherukoori, R., Tracey-Patte, T., van der Wielen, S.E., Ray, J., Raymond, O. 2020. Australian source rocks, fluids and petroleum systems – a new integrated geoscience data discovery portal for maximising data potential. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/133751. <b>Citation</b> Edwards, D., Buckler, T. 2024. Organic Geochemistry (ORGCHEM) Schema. Australian Source Rock and Fluid Atlas. Geoscience Australia, Canberra. https://pid.geoscience.gov.au/dataset/ga/149422

The Otway Basin is a northwest-southeast trending rift basin which spans from onshore Victoria and South Australia into the deep-water offshore. The prospective supersequences within the basin are largely of Cretaceous age which host three possible petroleum systems (Austral 1, 2 and 3). While there is production from onshore depocentres, and the inboard Shipwreck Trough, the majority of the offshore basin remains underexplored. Recent regional studies have highlighted the need for further work across the underexplored parts of the basin and here we focus on the offshore northwest Otway Basin, integrating reinterpreted historical well data, newly acquired and recently reprocessed seismic data. This new Well Folio consists of composite logs and supporting data which includes interpreted lithologies, petrophysical analyses, the analysis of historic organic geochemistry and organic petrology. In addition, updated well markers are provided based on seismic interpretation and new biostratigraphy in key wells. This integrated study provides the basis for renewed prospectivity assessment in the northwest offshore portion of the Otway Basin.

<div>The pyrolysis-reflectance tie database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases, which combine key properties related to thermal maturity. These data are typically used as input parameters in basin analysis and petroleum systems modelling to assist with the discovery and evaluation of sediment-hosted energy resources. The programmed pyrolysis analyses and the maceral reflectance analyses undertaken using reflected light microscopy are conducted on rock samples, either as cores, cuttings or rock chips, taken from boreholes and field sites in Australian sedimentary basins. The full datasets are available in the pyrolysis, vitrinite reflectance, maceral reflectance and organoclast maturity web services. These analyses are performed by various laboratories in service and exploration companies, Australian government institutions and universities using a range of instruments.</div><div><br></div><div>These data are collated from destructive analysis reports (DARs), well completion reports (WCRs), and literature. The data are delivered in the Combined Pyrolysis and Vitrinite Reflectance web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

The Cooper Basin is a Pennsylvanian to Middle Triassic intracratonic basin in northeastern South Australia and southwestern Queensland (Gravestock et al., 1998; Draper, 2002; Carr et al., 2016). Exploration activity in the region has recently expanded with explorers pursuing a range of newly-identified unconventional hydrocarbon plays (Goldstein et al., 2012; Menpes et al., 2013; Greenstreet, 2015). In support of this ongoing exploration activity in the region, Hall et al. (2016a) reviewed the Cooper Basin source rock geochemistry and maturity based on a compilation of updated and quality controlled publically available total organic carbon (TOC), Rock-Eval pyrolysis and vitrinite reflectance data. This is the first study of its kind to be undertaken for the Cooper Basin as a whole and builds on the previous work of Boreham & Hill (1998) in South Australia. This data pack contains the supplementary material accompanying this report. The distribution, quantity, quality and thermal maturity of the organic matter were described for all formations within the Pennsylvanian¿Permian Gidgealpa Group and collectively for the formations within the Triassic Nappamerri Group (Hall et al., 2015a, 2016a). Where possible, data were also analysed by lithology. The total organic carbon (TOC) and Rock-Eval pyrolysis data were used to investigate source rock quality, maturity and kerogen type. Original Hydrogen Index (HIo) values for each formation and lithology were determined through the analysis of a subset of low maturity samples and through application of a maturity correction based on Cooper Basin-specific kinetics (Deighton et al., 2003; Mahlstedt et al., 2015). Where data density permits, maps of present day TOC content and both present day HI and original HI were created, showing the spatial variation in the amount and quality of the source rock present now and prior to the onset of hydrocarbon generation. This data pack includes all TOC and Rock Eval data for the Cooper Basin stratigraphic evaluated in Hall et al. (2016a). It also includes the grids of present day TOC for the shale and/or coaly shale intervals, along with the grids of present day and original HI by formation. These datasets quantify the spatial distribution, quantity and quality of the source rocks and provide important insights into the hydrocarbon prospectivity of the Cooper Basin (Hall et al., 2015b; Kuske et al., 2015). This was the first study to be completed as part of the Australian Petroleum Source Rock Mapping project, a new work program being undertaken at Geoscience Australia to improve our understanding of the petroleum resource potential of Australia's sedimentary basins.