This Carpentaria Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Carpentaria Basin is a vast intra-cratonic sedimentary basin situated on and offshore in north-eastern Australia, covering around 550,000 square kilometres across Queensland and the Northern Territory. It comprises predominantly sandstone-rich rock units deposited during sea level highs from the Late Jurassic to Mid Cretaceous. The basin overlies a heterogeneous Proterozoic basement and is separated from contemporaneous sedimentary structures by basement highs and inliers. Four main depocentres within the larger Carpentaria Basin form four major sub-basins: the Western Gulf Sub-basin, Staaten Sub-basin, Weipa Sub-basin, and Boomara Sub-basin. While the basin is extensive and continuous in Queensland, it becomes more heterogeneous and discontinuous in the Northern Territory. Remnants of the basin's stratigraphy, referred to as the Dunmarra Basin, are found along the Northern Territory coast and inland. The depositional history commenced during the Jurassic with down warping near Cape York Peninsula, resulting in the Helby beds and Albany Pass beds' concurrent deposition. The basin experienced marine transgressions during the Cretaceous, with the Gilbert River Formation widespread and the Wallumbilla Formation occurring during sea level highs. The Carpentaria Basin's strata are relatively undeformed and unmetamorphosed. The Northern Territory sequence displays slightly different stratigraphy, limited to the height of the Aptian marine transgression above the Georgina Basin. The Walker River Formation and Yirrkala Formation represent key units in this area, outcropping as tablelands and mesas largely unaffected by tectonism.

This Karumba Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Karumba Basin is a shallow geological basin in Queensland, Australia, composed of sedimentary rocks and unconsolidated sediments that cover the Mesozoic Carpentaria Basin. Deposition started during the Late Cretaceous to Early Paleocene and has continued into the Holocene. The basin extends from western Cape York Peninsula into the Gulf of Carpentaria, where it connects with Cenozoic sediment deposits in Papua New Guinea. Although the sediments in both areas share lithostratigraphic and biostratigraphic similarities, their tectonic histories differ. The basin's structural geology is relatively uniform, with a significant downwarp known as the Gilbert-Mitchell Trough in Cape York Peninsula and another depocenter offshore in the Gulf of Carpentaria. The depositional history and stratigraphy of the Karumba Basin can be divided into three cycles of deposition, erosion, weathering, and the formation of stratigraphic units. The earliest cycle (the Bulimba Cycle) began in the Late Cretaceous to Early Paleocene, with episodes of significant uplift along the eastern margins of the basin. This resulted in the deposition of the Bulimba Formation and the Weipa Beds, primarily consisting of claystone, sandstone, conglomerate, and siltstone with minor coal layers. This cycle was followed by a period of planation and deep weathering, creating the Aurukun Surface. The second cycle (the Wyaaba Cycle) was initiated by large-scale earth movements along the Great Dividing Ranges, forming much of the eastern boundary of the Karumba Basin, and leading to the formation of the Wyaaba beds and other equivalent units. These beds consist mainly of fluvial to paralic clay-rich sandstone, conglomerate, siltstone, and claystone. In the south-west, Oligocene to Pliocene limestone deposits also formed in lacustrine settings, and were sourced from and deposited upon the underlying Georgina Basin. The cycle ended with ensuing periods of erosion and weathering and the development of the Pliocene Kendall Surface, as well as widespread basaltic volcanism. The final cycle (the Claraville Cycle) started in the Pliocene and continues to the present. It has experienced several episodes of uplift and deposition controlled by sea level change, climate variability and volcanism in the south. The Claraville beds are unconsolidated sediments, chiefly comprised of clayey quartzose sand and mud with minor gravels, reaching approximately 148 m thickness offshore, and approximately 70 m onshore. As this cycle is still ongoing, no terminal surface has been formed, and most units consist of unconsolidated surficial sediments.

This Sydney Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Sydney Basin, part of the Sydney–Gunnedah–Bowen basin system, consists of rocks dating from the Late Carboniferous to Middle Triassic periods. The basin's formation began with extensional rifting during the Late Carboniferous and Early Permian, leading to the creation of north-oriented half-grabens along Australia's eastern coast. A period of thermal relaxation in the mid Permian caused subsidence in the Bowen–Gunnedah–Sydney basin system, followed by thrusting of the New England Orogen from the Late Permian through the Triassic, forming a foreland basin. Deposition in the basin occurred in shallow marine, alluvial, and deltaic environments, resulting in a stratigraphic succession with syn-depositional folds and faults, mostly trending north to north-east. The Lapstone Monocline and Kurrajong Fault separate the Blue Mountains in the west from the Cumberland Plain in the central part of the basin. The Sydney Basin contains widespread coal deposits classified into geographic coalfield areas, including the Southern, Central, Western, Newcastle, and Hunter coalfields. These coalfields are primarily hosted within late Permian strata consisting of interbedded sandstone, coal, siltstone, and claystone units. The coal-bearing formations are grouped based on sub-basins, namely the Illawarra, Tomago, Newcastle, and Wittingham coal measures, underlain by volcanic and marine sedimentary rocks. Deposition within the basin ceased during the Triassic, and post-depositional igneous intrusions (commonly of Jurassic age) formed sills and laccoliths in various parts of the basin. The maximum burial depths for the basin's strata occurred during the early Cretaceous, reaching around 2,000 to 3,000 metres. Subsequent tectonic activity associated with the Tasman Rift extension in the Late Cretaceous and compressional events associated with the convergence between Australia and Indonesia in the Neogene led to uplift and erosion across the basin. These processes have allowed modern depositional environments to create small overlying sedimentary basins within major river valleys and estuaries, along the coast and offshore, and in several topographic depressions such as the Penrith, Fairfield and Botany basins in the area of the Cumberland Plain.

This Tasmania Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Late Carboniferous to Late Triassic Tasmania Basin covers approximately 30,000 square kilometres of onshore Tasmania. The basin contains up to 1500 m of mostly flat-lying sedimentary rocks, and these are divided into two distinct lithostratigraphic units, the Lower and the Upper Parmeener Supergroup. The Lower Parmeener Supergroup comprises Late Carboniferous to Permian rocks that mainly formed in marine environments. The most common rock types in this unit are mudstone, siltstone and sandstone, with less common limestone, conglomerate, coal, oil shale and tillite. The Upper Parmeener Supergroup consists predominantly of non-marine rocks, typically formed in fluvial and lacustrine environments. Common rock types include sandstone, siltstone, mudstone and minor basalt layers. Post-deposition the rocks of the Parmeener Supergroup experienced several major geological events, including the widespread intrusion of tholeiitic dolerite magma during the Middle Jurassic.

This South Nicholson Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. This South Nicholson Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The South Nicholson Basin is a Mesoproterozoic sedimentary basin spanning Queensland and the Northern Territory and is bordered by neighbouring provinces and basins. The basin unconformably overlies the Lawn Hill Platform of the Mount Isa Province to the east, is bound by the Warramunga and Davenport provinces to the south-west, the Murphy Province to the north and the McArthur Basin to the north-west. It extends southwards under younger cover sequences. Rock units in the basin are correlated with the Roper Group in the McArthur Basin, forming the 'Roper Superbasin.' The underlying Mount Isa Province contains potential shale gas resources. The basin mainly consists of sandstone- and siltstone-bearing units, including the South Nicholson Group, with a prevailing east to east-northeast structural grain. Mild deformation includes shallowly plunging fold axes and numerous faults along a north-west to south-east shortening direction. Major geological events affecting the South Nicholson Basin region include the formation of the Murphy Province's metamorphic and igneous rocks around 1850 million years ago (Ma). The Mount Isa Province experienced deposition in the Leichhardt Superbasin (1800 to 1750 Ma) and Calvert Superbasin (1725 to 1690 Ma). The Isa Superbasin, with extensional growth faulting in the Carrara Sub-basin (~1640 Ma), deposited sediments from approximately 1670 to 1590 Ma. Subsequently, the South Nicholson Group was deposited around 1500 to 1430 Ma, followed by the Georgina Basin's sedimentation. The basin shows potential for sandstone-type uranium, base metals, iron ore, and petroleum resources, while unconventional shale and tight gas resources remain largely unexplored. The Constance Sandstone holds promise as a petroleum reservoir, and the Mullera Formation and Crow Formation serve as potential seals.

This Surat Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Surat Basin is a sedimentary basin with approximately 2500 m of clastic fluvial, estuarine, coastal plain, and shallow marine sedimentary rocks, including sandstone, siltstone, mudstone, and coal. Deposition occurred over six cycles from the Early Jurassic to the Cretaceous, influenced by eustatic sea-level changes. Each cycle lasted 10 to 20 million years, ending around the mid-Cretaceous. Bounded by the Auburn Arch to the northeast and the New England Orogen to the southeast, it connects to the Clarence-Moreton Basin through the Kumbarilla Ridge. The Central Fold Belt forms its southern edge, while Cenozoic uplift caused erosion in the north. The basin's architecture is influenced by pre-existing faults and folds in the underlying Bowen Basin and the nature of the basement rocks from underlying orogenic complexes. Notable features include the north-trending Mimosa Syncline and Boomi Trough, overlying the deeper Taroom Trough of the Bowen Basin and extending southwards. The Surat Basin overlies older Permian to Triassic sedimentary basins like the Bowen and Gunnedah Basins, unconformably resting on various older basement rock terranes, such as the Lachlan Orogen, New England Orogen, and Thomson Orogen. Several Palaeozoic basement highs mark its boundaries, including the Eulo-Nebine Ridge in the west and the Kumbarilla Ridge in the east. Paleogene to Neogene sediments, like those from the Glendower Formation, cover parts of the Surat Basin. Remnant pediments and Cenozoic palaeovalleys incised into the basin have added complexity to its geological history and may influence aquifer connections. Overall, the Surat Basin's geological history is characterized by millions of years of sedimentation, tectonic activity, and erosion, contributing to its geological diversity and economic significance as a source of natural resources, including coal and natural gas.

This Clarence-Moreton Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The formation of the Clarence-Moreton Basin initiated during the Middle Triassic due to tectonic extension. This was followed by a prolonged period of thermal cooling and relaxation throughout the Late Triassic to the Cretaceous. Deposition of a non-marine sedimentary succession occurred during this time, with the Clarence-Moreton Basin now estimated to contain a sedimentary thickness of up to 4000 m. There were three main depositional centres within the basin, and these are known as the Cecil Plain Sub-basin, Laidley Sub-basin and Logan Sub-basin. The Clarence-Moreton Basin sediments were originally deposited in non-marine environments by predominantly northward flowing rivers in a relatively humid climate. The sedimentary sequences are dominated by a mixed assemblage of sandstone, siltstone, mudstone, conglomerate and coal. Changing environmental conditions due to various tectonic events resulted in deposition of interbedded sequences of fluvial, paludal (swamp) and lacustrine deposits. Within the Clarence-Moreton Basin, coal has been mined primarily from the Jurassic Walloon Coal Measures, including for the existing mines at Commodore and New Acland. However, coal deposits also occur in other units, such as the Grafton Formation, Orara Formation, Bundamba Group, Ipswich Coal Measures, and Nymboida Coal Measures. Overlying the Clarence-Moreton Basin in various locations are Paleogene and Neogene volcanic rocks, such as the Main Range Volcanics and Lamington Volcanics. The thickness of these volcanic rocks is typically several hundred metres, although the maximum thickness of the Main Range Volcanics is about 900 m. Quaternary sediments including alluvial, colluvial and coastal deposits also occur in places above the older rocks of the Clarence-Moreton Basin.

This Georgina Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Georgina Basin is a large intra-cratonic sedimentary basin in central Australia that has undergone several deformation events throughout its geological history. Its deposition began during the Neoproterozoic due to the breakup and erosion of the Rodinia Supercontinent, resulting in the broader Centralian Superbasin, encompassing the Amadeus, Georgina, Ngalia, Officer, and Savory basins. The basin's initial formation occurred as a north-west trending extensional structure in its southern part, containing thick sequences preserved in structural depo-centres such as the Toko Syncline, Dulcie Syncline, and Burke River Structural Zone. The basin unconformably overlies Proterozoic basement rocks, with its eastern boundary onlapping the Mesoproterozoic Mount Isa Province. The Georgina Basin is connected to the Daly and Wiso basins by early to middle Cambrian seaways in some areas, while in others, they are separated by basement highs like the Tomkinson, Warramunga, and Davenport provinces. The northern Georgina Basin is overlain by Mesozoic rocks of the Carpentaria Basin, and the southern basin is covered by Cenozoic deposits. The stratigraphy and rock types within the Georgina Basin include Neoproterozoic rock units in the southern parts correlated with the Centralian Superbasin, characterized by dolostone, tillite, sandstone, quartzite, siltstone, conglomerate, and shale. The basin's structure has been moderately deformed by folding and faulting, with the most significant deformation in its southern part related to the Ordovician to Carboniferous Alice Springs Orogeny. The basin's development occurred in several stages, including Neoproterozoic rifting and subsidence, tectonic activity during the Petermann Orogeny, Early Cambrian rifting, Middle to late Cambrian foreland loading and deposition, Early Ordovician minor rifting, transpression during the Alice Springs Orogeny, and a final phase of synorogenic siliclastic sedimentation in a foreland basin setting, is limited to southern depo-centres. Overall, the Georgina Basin's complex geological history has resulted in a diverse array of sedimentary rocks and structural features, making it a significant area of interest for geological studies and resource exploration in central Australia.

This Port Phillip-Westernport Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Port Phillip and Westernport basins are small, shallow sedimentary basins located in south-central Victoria, formed during the Late Cretaceous rifting of Australia and Antarctica. They share similar stratigraphy with nearby basins. The Port Phillip Basin is bounded by the Selwyn and Rowsley Faults to the east and west, while the Heath Hill Fault marks the eastern boundary of the Westernport Basin. Both basins have pre-Cenozoic basement rocks comprising folded and faulted Paleozoic metasedimentary rocks and granites from the Lachlan Fold Belt. The Port Phillip Basin's stratigraphy includes Maastrichtian to Cenozoic sedimentary units with intercalated volcanic rocks. The main depocentres are the Sorrento Graben, Ballan Graben/Lal Lal Trough, and Parwan Trough. Notable formations are the Yaloak and Werribee formations, with coal-bearing strata and marine sediments. The Westernport Basin has coastal sediments and volcanic deposits from Paleocene to Holocene. It experienced marine transgressions and regressions due to sea-level fluctuations. Fault movements in the late Pliocene and early Pleistocene formed a fault-bounded depression centered on the Koo Wee Rup Plain. The main units are the Childers Formation, Older Volcanics, Yallock Formation, Sherwood Marl, and Baxter Sandstone. Both basins have Quaternary sediments, including Pleistocene eolian sand sequences, Holocene alluvial and paludal clays, and fluvial sediments in valleys and palaeovalleys. The Port Phillip Basin contains distinct phases of terrestrial and marine deposition, while the Westernport Basin has Eocene volcanism and marine sediments. These basins are important geological features in the region, with various formations representing millions of years of geological history.

This North-east Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. In fractured rock aquifers, groundwater is stored in the fractures, joints, bedding planes and cavities of the rock mass. About 40 per cent of groundwater in Australia is stored in fractured rock aquifers, and much of this may be available for irrigation, town water supplies, stock watering and domestic use. Approximately 33% of all bores in Australia are in fractured systems, representing about 10 per cent of total extraction. Groundwater yield is extremely variable, and dependent on the distribution of major fractures. However, rates of groundwater movement in fractured rock systems are difficult to quantify. Characterising groundwater flow in fractured rock aquifers is difficult with existing techniques, and groundwater flow direction can be related more to the orientation of fractures than to the hydraulic head distribution. Recharge in fractured rock aquifers is usually local and intermediate. The Queensland fractured rock is taken to be that part of the northern elements of the Eastern Fracture Rock provinces that extends from the southern part of the Laura Basin, south to the state boundary with New South Wales, and inland as far as the Bundock and Galilee Basins. It comprises the Mossman, Thomson and New England Orogens, and related Provinces. These include: i) The Mossman Orogen, including the Hodgkinson Province, and the Broken River Province; ii) The Thomson Orogen, comprising Neoprotozoic – Early Paleozoic Provinces, including the Anakie Province, Barnard Province, Charters Tower Province, Greenvale Province, and Iron Range Province; and iii) The New England Orogen, including the Gympie Province, Connors-Auburn Province, Yarrol Province, Wandilla Province, Woolomin Province, Calliope Province, Marlborough Province, and Silverwood Province