The National Spectral Database (NSD) houses data from Australian remote sensing scientists. The database includes spectra covering targets as diverse as mineralogy, soils, plants, water bodies and various land surfaces. Currently the database holds spectral information from multiple locations across the country and as the collection grows in spatial / temporal coverage, the NSD will service continental scale validation requirements of the Earth observation community for satellite-based measurements of surface reflectance. <b>Value:</b> Curated spectral data provides a wealth of knowledge to remote sensing scientists. For other parties interested in calibration and validation (Cal/Val) of surface reflectance products, the Geoscience Australia (GA) Cal/Val dataset provides a useful resource of ground-truth data to compare to reflectance captured by Landsat 8 and Sentinel 2 satellites. The Aquatic Library is a robust collection of Australian datasets from 1994 to present time, primarily of end-member and substratum measurements. The University of Wollongong collection represents immense value in end-member studies, both terrestrial and aquatic. <b>Scope:</b> The NSD covers Australian data including historical datasets as old as 1994. Physical study sites encompass locations around Australia, with spectra captured in every state. <b>Data types:</b> - Spectral data: raw digital numbers (DN), radiance and reflectance.  - From spectral bands VIS-NIR, SWIR1 & SWIR2: wavelengths 350nm - 2500nm collected with instruments in the field or lab setting. Contact for further information: NSDB_manager@ga.gov.au

Airborne electromagnetic (AEM) data measure variations in the conductivity of the ground by transmitting an electromagnetic signal from a system attached to a plane or helicopter. Depending on the AEM system used and the sub-surface conditions, AEM techniques can detect variations in the conductivity of the ground to a depth of several hundred metres. The responses recorded are commonly caused by the presence of electrically conductive materials such as salt or saline water, graphite, clays and sulphide minerals. <b>Value:</b> Data used for interpreting the geologic structure of the subsurface. This work can be used for the assessment of resource potential. <b>Scope:</b> Systematic coverage of large portions of the Australian continent.

This collection includes information regarding the location and design of Australian onshore and offshore boreholes, where boreholes are defined as the generalized term for any narrow shaft drilled in the ground, either vertically or horizontally. In this context, boreholes include: Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types, but does not include Costean, Trench or Pit. <b>Value: </b> Information related to the boreholes described in this collection have the potential to support geological investigations and assessment of a variety of resources. <b>Scope: </b>Selected open file boreholes Australian boreholes located onshore and offshore

The national standard lexicon of geologic units, including: age, lithology, geologic relationships for all Australian geological units, and a record of their use in literature. Links to Geological Provinces and Geological Maps. The collection is maintained by Geoscience Australia on behalf of the Australian Stratigraphy Commission, a standing committee of the Geological Society of Australia. <b>Value: </b>The lexicon standardises terminology for geologic units, thereby enabling integration of different geologic studies and datasets. <b>Scope: </b>Covers all Australian Territories, including Australia's Antarctic Territories. The database contains over 17,500 current stratigraphic names and over 36,000 variations, most of which are superseded, obsolete, or misspelt versions of the current names. The publicly accessible portion of this collection is made available through the Australian Stratigraphic Units Database (ASUD), the national authority on stratigraphic names in Australia and can be accessed here: <a href="https://pid.geoscience.gov.au/dataset/ga/21884">https://pid.geoscience.gov.au/dataset/ga/21884</a>

Radiogenic isotopes decay at known rates and can be used to interpret ages for minerals, rocks and geologic processes. Different isotopic systems provide information related to different time periods and geologic processes, systems include: U-Pb and Ar/Ar, Sm-Nd, Pb-Pb, Lu-Hf, Rb-Sr and Re-Os isotopes. The GEOCHRON database stores full analytical U-Pb age data from Geoscience Australia's (GA) Sensitive High Resolution Ion Micro-Probe (SHRIMP) program. The ISOTOPE database is designed to expand GA's ability to deliver isotopic datasets, and stores compiled age and isotopic data from a range of published and unpublished (GA and non-GA) sources. OZCHRON is a depreciated predecessor to GEOCHRON and ISOTOPE, the information once available in OZCHRON is in the process of migration to the two current databases. The ISOTOPE compilation includes sample and bibliographic links through the A, FGDM, and GEOREF databases. The data structure currently supports summary ages (e.g., U-Pb and Ar/Ar) through the INTERPRETED_AGES tables, as well as extended system-specific tables for Sm-Nd, Pb-Pb, Lu-Hf and O- isotopes. The data structure is designed to be extensible to adapt to evolving requirements for the storage of isotopic data. ISOTOPE and the data holdings were initially developed as part of the Exploring for the Future (EFTF) program - particularly to support the delivery of an Isotopic Atlas of Australia. During development of ISOTOPE, some key considerations in compiling and storing diverse, multi-purpose isotopic datasets were developed: 1) Improved sample characterisation and bibliographic links. Often, the usefulness of an isotopic dataset is limited by the metadata available for the parent sample. Better harvesting of fundamental sample data (and better integration with related national datasets such as Australian Geological Provinces and the Australian Stratigraphic Units Database) simplifies the process of filtering an isotopic data compilation using spatial, geological and bibliographic criteria, as well as facilitating 'audits' targeting missing isotopic data. 2) Generalised, extensible structures for isotopic data. The need for system-specific tables for isotopic analyses does not preclude the development of generalised data-structures that reflect universal relationships. GA has modelled relational tables linking system-specific Sessions, Analyses, and interpreted data-Groups, which has proven adequate for all of the Isotopic Atlas layers developed thus far. 3) Dual delivery of 'derived' isotopic data. In some systems, it is critical to capture the published data (i.e. isotopic measurements and derived values, as presented by the original author) and generate an additional set of derived values from the same measurements, calculated using a single set of reference parameters (e.g. decay constant, depleted-mantle values, etc.) that permit 'normalised' portrayal of the data compilation-wide. 4) Flexibility in data delivery mode. In radiogenic isotope geochronology (e.g. U-Pb, Ar-Ar), careful compilation and attribution of 'interpreted ages' can meet the needs of much of the user-base, even without an explicit link to the constituent analyses. In contrast, isotope geochemistry (especially microbeam-based methods such as Lu-Hf via laser ablation) is usually focused on the individual measurements, without which interpreted 'sample-averages' have limited value. Data delivery should reflect key differences of this kind. <b>Value: </b>Used to provide ages and isotope geochemistry data for minerals, rocks and geologic processes. <b>Scope: </b>Australian jurisdictions and international collaborative programs involving Geoscience Australia

Data in the GEOCHEM database comprises inorganic geochemical analytical data and associated metadata. Geochemical data comprises concentration data (value, error, unit of measure) measured on a range of analytical instruments, for a range of elements of the periodic table. Associated metadata includes information on analytical techniques, analytical methodology, laboratory, analysts, date of analysis, detection limits, accuracy, and precision. The GEOCHEM database also records results for reference standards. Data is specifically for rocks, soils and other unconsolidated geological material and does not include oils, gases or water analyses. Geochemical data may be total rock (i.e., whole rock analysed) or for a variety of fractions of the total rock, e.g., various non-total acid digests, mineral separates, differing size fractions. It also includes quantitative to semi-quantitative data from field measurements, such as portable x-ray fluorescence (XRF). It does not include geochemical data for individual minerals. <b>Value: </b>Geochemical data underpins much geoscientific study, and is used directly to classify, characterise and understand geological material and its formation. It has direct relevance to understanding the formation of the earth, the continents, and the processes that create and shape the surface we live on. For example, this information is used within: both discovering and the understanding of mineral deposits we depend on; the nature, health and sustainability of the soils we live and farm on; as well as providing input into a range of potential geohazards. <b>Scope: </b>The collection includes data from over 60 years of Geoscience Australia (GA) and state/territory partner regional geological projects within Australia, as well as continental-scale and regional geochemical surveys like National Geochemical Survey of Australia (NGSA) and Northern Australia Geochemical Survey (NAGS) (Exploring for the Future- EFTF). It also includes data from other countries that GA has worked with, e.g., Papua New Guinea, Antarctica, Solomon Islands and New Zealand. Explore the <b>Geoscience Australia portal - <a href="https://portal.ga.gov.au/">https://portal.ga.gov.au/</a></b>

This data collection are comprised of magnetic surveys acquired across Australia by Commonwealth, State and Northern Territory governments and the private sector with project management and quality control undertaken by Geoscience Australia. Magnetic surveying is a geophysical method for measuring the intensity (or strength) of the Earth's magnetic field, which includes the fields associated with the Earth's core and the magnetism of rocks in the Earth's crust. Measuring the magnetism of rocks, in particular, provides a means for the direct detection of several different types of mineral deposits and for geological mapping. The magnetism of rocks depends on the volume, orientation and distribution of their constituent magnetic minerals (namely magnetite, monoclinic pyrrhotite, maghaemite and ilmenite). The instrument used in magnetic surveys is a magnetometer, which can measure the intensity of the magnetic field in nanoteslas (nT). Magnetic surveys in this collection have been acquired using aircraft or ship-mounted magnetometers and are a non-invasive method for investigating subsurface geology.

Relatively little is known about what the seafloor of Australia's continental shelf looks like or has living on it. Geoscience Australia (GA), together with other partners, undertakes a range of marine surveys to improve our understanding and management of Australia's marine environments. One component of the research involves the collection of underwater imagery to directly observe and characterise coastal and deep sea habitats. In some regions these surveys build on existing baseline knowledge, but in many areas, particularly deep offshore locations, these surveys provide the first images of the seafloor. The imagery collection includes both still and video imagery collected using various systems, including towed platforms, remotely operated vehicles (ROVs) and autonomous underwater vehicles (AUVs). Post-survey reports and metadata files are included as part of the collection, which describe further details of the surveys and respective imagery collections. The seafloor imagery provides a wealth of information about the geological features, habitats and life forms occurring throughout Australia's marine jurisdiction. <b>Value: </b>Improve the understanding and management of Australia's marine environments. <b>Scope: </b>GA surveys from 2007 onwards in waters around Australia and Australia's Antarctic Territory.

This collection includes Global Navigation Satellite System (GNSS) observations from long-term continuous or semi continuous reference stations at multiple locations across Australia and its external territories, including the Australian Antarctic Territory. <b>Value:</b> The datasets within this collection are provided on an openly accessible basis to support a myriad of scientific and societal positioning applications in Australia. These include the development and maintenance of the Australian Geospatial Reference System (AGRS); the densification of the International Terrestrial Reference Frame (ITRF); crustal deformation studies; atmospheric studies; and the delivery of precise positioning services to Australian businesses. <b>Scope: </b> Data from reference stations across Australia and its external territories, including the Australian Antarctica Territory. <b>Access: </b> To access the datasets and query station information visit the <a href="https://gnss.ga.gov.au./">Global Navigation Satellite System Data Centre</a>

Geoscience Australia houses one of the world's largest collections of petroleum data. Much of this data is non-confidential and available to the petroleum industry, research organisations and the public. The collection includes seismic survey data submitted by industry under legislative requirements as well as data collected by research projects and marine surveys undertaken by Geoscience Australia or other government agencies or institutions. The collection comprises digital 2D and 3D seismic survey field data, navigation data, processed data, velocity data, observer's logs, operational reports, processing reports, bathymetry data, potential field data (gravity and magnetic) and also hard-copy data submitted during the pre-digital era including seismic sections and other analogue formats <b>Value: </b> Data used for interpreting the geologic structure of the subsurface. This work can be used for the assessment of resource potential. <b>This data can be discovered through the National Offshore Petroleum Information Management System (NOPIMS) - https://www.ga.gov.au/nopims</b>