Advanced burial and thermal geo-history modelling was carried out using Fobos Pro modelling software for the first time in Australia without relying on default or inferred values (such as heat flow or geothermal gradient). Our methodology is a substantial extension to the conventional approach.

Extended abstract version of short abstract accepted for conference presentation GEOCAT# 73701

Basin evolution of the Vlaming Sub-basin and the deep-water Mentelle Basin, both located offshore on the southwest Australian continental margin, were investigated using 2D and 3D petroleum system modelling. Compositional kinetics, determined on the main source sequences, were used to predict timing of hydrocarbon generation and migration as well as GOR evolution and phase behaviour in our 2D and 3D basin models. The main phase of petroleum generation in the Vlaming Sub-basin occurred at 150 Ma and ceased during following inversion and erosion episodes. Only areas which observed later burial have generated additional hydrocarbons during the Tertiary and up to present day. The modelling results indicate the likely generation and trapping of light oils for the Jurassic intervals for a variety of structural traps. It is these areas which are of greatest interest from an exploration point of view. The 2D numerical simulations in the Mentelle Basin indicate the presence of active hydrocarbon generating kitchen areas. Burial histories and generalized petroleum evolutionary histories are investigated.

Legacy product - no abstract available

A short article describing the outcomes of the Tasman Frontier Petroleum Industry Workshop held at Geoscience Australia on 8 and 9 March 2012.

The Early Permian to Middle Triassic Bowen and Gunnedah Basins and the Early Jurassic to Early Cretaceous Surat Basin exhibit a complex subsidence history over a period of about two hundred million years. Backstripped tectonic subsidence curves, constructed by removing the effects of processes such as sediment loading, loading due to the water column, and sediment compaction allow the subsidence histories of the basin to be examined in terms of the tectonic drivers that caused the subsidence of the basins. In the Early Permian, rapid subsidence was driven by mechanical extension, forming a series of half grabens along the western margin of the Bowen and Gunnedah Basins. Mechanical extension ceased at about 280 Ma, being replaced by a phase of passive thermal subsidence, resulting in more widespread, uniform sedimentation, with reduced tectonic subsidence rates. At the start of the Late Permian, the passive thermal subsidence phase was interrupted by the onset of lithospheric flexure during a foreland basin phase, driven by convergence and thrust loading to the east in the New England Orogen. Initially, dynamic loading, caused by viscous corner flow in the asthenospheric wedge above the west-dipping subducting plate, led to limited tectonic subsidence. Later in the Late Permian, the dynamic loading was overwhelmed by static loading, caused by the developing retroforeland thrust belt in New England, leading to very high rates of tectonic subsidence, and the development of a major retroforeland basin. Peneplanation in the Late Triassic was followed by sedimentation at the start of the Jurassic, forming the Surat Basin, where the tectonic subsidence can again be interpreted in terms of dynamically-induced platform tilting. Subduction ceased at about 95 Ma, resulting in rapid uplift, due the rebound of the lithosphere following cessation of subduction, or it stepping well to the outboard of Australia.

Like many of the basins along Australia's eastern seaboard, there is currently only a limited understanding of the geothermal energy potential of the New South Wales extent of the Clarence-Moreton Basin. To date, no study has examined the existing geological information available to produce an estimate of subsurface temperatures throughout the region. Forward modelling of basin structure using its expected thermal properties is the process generally used in geothermal studies to estimate temperatures at depth in the Earth's crust. The process has seen increasing use in complex three-dimensional (3D) models, including in areas of sparse data. The overall uncertainties of 3D models, including the influence of the broad assumptions required to undertake them, are generally only poorly examined by their authors and sometimes completely ignored. New methods are presented in this study which will allow estimates and uncertainties to be addressed in a quantitative and justifiable way. Specifically, this study applies Monte Carlo Analysis to constrain uncertainties through random sampling of statistically congruent populations. Particular focus has been placed on the uncertainty in assigning thermal conductivity values to complex and spatially extensive geological formations using only limited data. As a case study these new methods are then applied to the New South Wales extent of the Clarence-Moreton Basin. The geological structure of the basin has been modelled using data from existing petroleum drill holes, surface mapping and information derived from previous studies. A range of possible lithological compositions was determined for each of the major geological layers through application of compositional data analysis. In turn, a range of possible thermal conductivity values was determined for the major lithology groups using rock samples held by the NSW Department of Primary Industries (DPI). These two populations of values were then randomly sampled to establish 120 different forward models, the results of which have been interpreted to present the best estimate of expected subsurface temperatures, and their uncertainties. These results suggest that the Clarence-Moreton Basin has a moderate geothermal energy potential within an economic drilling depth. This potential however, displays significant variability between different modelling runs, which is likely due to the limited data available for the region. While further work could improve these methods, it can be seen from this study that uncertainties can provide a means by which to add confidence to results, rather than undermine it.

Legacy product - no abstract available

A recent Geoscience Australia sampling survey in the Bight Basin recovered hundreds of dredge samples of Early Cenomanian to Late Maastrichtian age. Given the location of these samples near the updip northern edge of the Ceduna Sub-basin, they are all immature for hydrocarbon generation with vitrinite reflectance - 0.5% RVmax, Tmax < 440oC and PI < 0.1. Excellent hydrocarbon generative potential is seen for marine, outer shelf, black shales and mudstones with TOC to 6.9% and HI up to 479 mg hydrocarbons/g TOC. These sediments are exclusively of Late Cenomanian-Early Turonian (C/T) in age. The high hydrocarbon potential of the C/T dredge samples is further supported by a dominance of the hydrogen-rich exinite maceral group (liptinite, lamalginite and telalginite macerals), where samples with the highest HI (> 200 mg hydrocarbons/g TOC) contain > 70% of the exinite maceral group. Pyrolysis-gas chromatography and pyrolysis-gas chromatography mass spectrometry of the C/T kerogens reveal moderate levels of sulphur compounds and the relative abundances of aliphatic and aromatic hydrocarbons predict the generation of a paraffinic-naphthenic-aromatic low wax oil in nature. Not enough oom for rest of Abstract

The under-explored deepwater Otway and Sorell basins lie offshore of southwestern Victoria and western Tasmania in water depths of 100-4,500 m. The basins developed during rifting and continental separation between Australia and Antarctica from the Cretaceous to Cenozoic and contain up to 10 km of sediments. Significant changes in basin architecture and depositional history from west to east reflect the transition from a divergent rifted continental margin to a transform continental margin. The basins are adjacent to hydrocarbon-producing areas of the Otway Basin, but despite good 2D seismic data coverage, they remain relatively untested and their prospectivity is poorly understood. The deepwater (>500 m) section of the Otway Basin has been tested by two wells, of which Somerset 1 recorded minor gas shows within the Upper Cretaceous section. Three wells have been drilled in the Sorell Basin, where minor oil and gas indications were recorded in Maastrichtian rocks near the base of Cape Sorell 1. Building on previous GA basin studies and using an integrated approach, new aeromagnetic data, open-file potential field, seismic and exploration well data have been used to develop new interpretations of basement structure and sedimentary basin architecture. Analysis of potential field data, integrated with interpretation of 2D seismic data, has shown that reactivated north-south Paleozoic structures, particularly the Avoca-Sorell Fault System, control the transition from extension through transtension to a dominantly strike-slip tectonic regime along this part of the southern margin. Depocentres to the west of this structure are large and deep in contrast to the narrow elongate depocentres to its east. Regional-scale mapping of key sequence stratigraphic surfaces across the basins has resulted in the identification of distinct basin phases. Three periods of upper crustal extension can be identified. In the north, one phase of extension in the Early Cretaceous and two in the Late Cretaceous can be mapped. However, to the south, the Late Cretaceous extensional phase extends into the Paleocene, reflecting the diachronous break-up history. Extension was followed by thermal subsidence, and during the Eocene-Oligocene the basin was affected by several periods of compression, resulting in inversion and uplift. The new seismic interpretation shows that depositional sequences hosting active petroleum systems in the producing areas of the Otway Basin are also likely to be present in the southern Otway and Sorell basins. Petroleum systems modelling suggests that if the equivalent petroleum systems elements are present, then they are mature for oil and gas generation, with generation and expulsion occurring mainly in the Late Cretaceous in the southern Otway and northern Sorell basins and during the Paleocene in the Strahan Sub-basin (southern Sorell Basin). The integration of sequence stratigraphic interpretation of seismic data, regional structural analysis and petroleum systems modelling has resulted in a clearer understanding of the tectonostratigraphic evolution of this complex basin system. The results of this study provide new insights into the geological controls on the development of the basins and their petroleum prospectivity.