The Janina 1 borehole was drilled approximately 110 km W of Bourke, New South Wales. The borehole was designed to test aeromagnetic anomalies in the basement rocks and to test the electrical conductivity properties of cover and basement rocks to validate airborne electromagnetic (AEM) data.

As part of the East Tennant National Drilling Initiative campaign, ten stratigraphic boreholes were drilled in the vicinity of the Barkly Roadhouse, east of Tennant Creek, in the Northern Territory. These holes were designed to test stratigraphic, structural and mineral systems questions in the completely buried and poorly-understood East Tennant region. Drilling was completed during September to December 2020 and was undertaken by MinEx CRC on behalf of Geoscience Australia. This report outlines basic borehole targeting rationale, borehole metadata, and analyses performed immediately following drilling to accompany data available through the Geoscience Australia portal.

The Euroli 1 borehole was drilled approximately 23 km SSW of Hungerford, Queensland (which is located on the New South Wales-Queensland border). The borehole was designed to test aeromagnetic anomalies in the basement rocks, test the electrical conductivity properties of cover and basement rocks to validate airborne electromagnetic (AEM) data, and to test pre-drilling geophysical cover thickness estimates. The Euroli 1 borehole was commenced as a vertical mud rotary borehole and was completed with a deviated diamond drilled tail using a wedge.

The Congararra 1 borehole was drilled approximately 70 km NNW of Bourke, NSW. The borehole was designed to test aeromagnetic anomalies in the basement rocks, test the electrical conductivity properties of cover and basement rocks to validate airborne electromagnetic (AEM) data, and to test pre-drilling geophysical cover thickness estimates.

The GSQ Eulo 3 borehole was drilled approximately 50 km SW of Eulo, Queensland. The borehole was designed to test aeromagnetic anomalies in the basement rocks and to test the electrical conductivity properties of cover and basement rocks.

Exploring for the Future (EFTF) is an Australian Government initiative that gathers new data and information about potential mineral, energy and groundwater resources. Commencing in 2016 with a focus on northern Australia, an EFTF extension to 2024 was recently announced, with expanded coverage across mainland Australia and Tasmania. The EFTF energy component aims to improve our understanding of the petroleum potential of frontier onshore Australian basins and has acquired significant pre-competitive datasets, including the recently drilled Barnicarndy 1 deep stratigraphic well in Western Australia’s Canning Basin (in partnership with the Geological Survey of Western Australia), and NDI Carrara 1 deep stratigraphic well in the South Nicholson region of the Northern Territory (in partnership with the MinEX CRC). These are the first stratigraphic wells drilled in a petroleum basin by Geoscience Australia since the formation in 2001 from its predecessor agencies. Both wells were sited along two-dimensional, deep crustal seismic surveys acquired by Geoscience Australia as part of EFTF, and provide stratigraphic control for the imaged geology. The sedimentary fill intersected by the Barnicarndy 1 and NDI Carrara 1 wells were cored and logged with a broad suite of wireline tools, providing substantial new data in two frontier basins. These data provide insights into regional stratigraphy and local lithology. Geochronology, petrographic, organic and inorganic geochemistry, petrophysical rock properties, petroleum systems elements, palaeontological, and fluid inclusion studies have been undertaken upon which inferences on regional prospectivity can made in these data-poor regions. Moving into the next phase of EFTF, these wells provide a template for new pre-competitive data acquisition by Geoscience Australia, expanding our knowledge of frontier regions making them attractive for new investment and exploration.

The Milcarpa 1 borehole was drilled approximately 9 km SSE of Hungerford, Queensland, adjacent to the road between Hungerford and Wanaaring, NSW. The borehole was designed to test aeromagnetic anomalies in the basement rocks, test the electrical conductivity properties of cover and basement rocks to validate airborne electromagnetic (AEM) data, and to test pre-drilling geophysical cover thickness estimates.

The GSQ Eulo 4 borehole was drilled approximately 35.5 km SW of Eulo, Queensland. The borehole was designed to test aeromagnetic anomalies in the basement rocks, and to test the electrical conductivity properties of cover and basement rocks to validate airborne electromagnetic (AEM) data.

The GSQ Cunnamulla 1 borehole was drilled approximately 110 km SE of Cunnamulla, Queensland. The borehole was designed to test aeromagnetic anomalies in the basement rocks, test the electrical conductivity properties of cover and basement rocks, and to test pre-drilling geophysical cover thickness estimates.

The Congararra 2 borehole was drilled approximately 73 km NNW of Bourke, NSW/ The borehole was designed to test aeromagnetic anomalies in the basement rocks, test the electrical conductivity properties of cover and basement rocks to validate airborne electromagnetic (AEM) data, and to test pre-drilling geophysical cover thickness estimates.