As part of the Broken Hill Exploration Initiative (BHEI), Geoscience Australia and the Department of Primary Industries South Australia (PIRSA) recently embarked on a two-year joint project to better understand the deformational history and tectonic evolution of Palaeoproterozoic rocks in the Outalpa Inlier, South Australia. This project is one of several structural studies undertaken on these rocks although to date no consensus has emerged regarding the number, orientation and geometry of the main deformational events. To address this problem, detailed structural and stratigraphic studies were undertaken around Ameroo Hill and Tommie Wattie Bore region in the central part of the inlier where a well defined stratigraphic succession is exposed. Comparable studies undertaken in other parts of the Olary Domain indicate that the same stratigraphy and structural history are developed across the entire Curnamona Province and that the structures developed around Ameroo Hill are not atypical of the province as a whole. Included in the Olary stratigraphy is the regionally extensive and highly prospective "Bimba Formation", a marble and calc-silicate dominated unit known for its high base-metal content (Pb, Zn, Mn, Cu, Co). Geochronological studies have recently confirmed this unit as a correlative of the Ettlewood Calc-silicate in the Broken Hill Group and there is growing geochronological evidence (Page et al., 2000) that other parts of the Olary sequence can be similarly matched to equivalent units in the Broken Hill Domain. Lithostratigraphic nomenclature follows Conor (2000, 2001) who subdivided the Willyama Supergroup into two major units of contrasting magnetic susceptibility and composition: the Curnamona and Strathearn Groups. REFERENCES: Conor, C.H.H., 2000. Definition of major sedimentary and igneous units of the Olary Domain, Curnamona Province. MESA Journal, V.19: 51-56. Conor, C.H.H., 2001. Geology of the Olary Domain, Curnamona Province, South Australia: Field Guide book. PIRSA, Adelaide. Page, R.W., Stevens, B.P.J., Gibson, G.M. and Conor, C.H.H., 2000. Geochronology of Willyama Supergroup rocks between Olary and Broken Hill, and a comparison to northern Australia. In: Peljo, M. (compiler) Broken Hill Exploration Initiative Abstracts Volume, AGSO Record 2000/10: 72-75.

The Landsat series of satellites commenced acquiring remotely sensed data with the launch of Landsat 1 in 1972. The Landsat satellites travel at an altitude of 705 kilometres and provide coverage of the entire globe every 16 days. The Multispectral Scanner (MSS) sensor has been the primary Earth-observing instrument. MSS images in four spectral bands (called Bands 4-7 on LS1,2&3 and 1-4 on LS 4&5) covering the visible and near infrared regions of the electromagnetic spectrum. The MSS ground swath is 185 kilometres wide, with a nominal 80 metre pixel resolution. The archive of ACRES MSS data dates from 1979 onwards. ACRES MSS archive contains data from the following Landsat satellites: Landsat 2 commenced November 1979, ceased Feb 1982 Landsat 3 commenced November 1979 ceased August 1982 Landsat 4 commenced August 1982, ceased May 1984 Landsat 5 commenced 9 April 1984, ceased November 1997 - Band 4 (original band 7) data poor quality from 29 April 1994 - Band 4 (original band 7)switched off permanently 20 August 1995 Note that MSS data from Landsat 3 & 4 is of poor quality and requirements for this data need to be discussed with ACRES prior to purchase.

Shows the boundaries of all areas registered as part of the National Estate. Data are captured from 1:100 000 and 1:250 000 scale source material. Attribute information for each area consists of a name, map sheet it apears on, geographical coordinates and a unique Australian Heritage number. Produced in conjunction with the Australian Heritage Commission. Data are suitable for GIS applications. Data is updated annually in accordance with Commonwealth Gazettal notifications.

This map is part of the series that covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 513 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and 110 kilometres from north to south. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. The topographic map and data index shows coverage of the sheets. Product Specifications Coverage: The series covers the whole of Australia with 513 maps. Currency: Ranges from 1995 to 2009. 95% of maps have a reliability date of 1994 or later. Coordinates: Geographical and either AMG or MGA (post-1993) Datum: AGD66, GDA94, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Paper, flat and folded copies.

This map is part of the series that covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 513 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and 110 kilometres from north to south. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. The topographic map and data index shows coverage of the sheets. Product Specifications Coverage: The series covers the whole of Australia with 513 maps. Currency: Ranges from 1995 to 2009. 95% of maps have a reliability date of 1994 or later. Coordinates: Geographical and either AMG or MGA (post-1993) Datum: AGD66, GDA94, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Paper, flat and folded copies.

This map is part of the series that covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 513 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and 110 kilometres from north to south. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. The topographic map and data index shows coverage of the sheets. Product Specifications Coverage: The series covers the whole of Australia with 513 maps. Currency: Ranges from 1995 to 2009. 95% of maps have a reliability date of 1994 or later. Coordinates: Geographical and either AMG or MGA (post-1993) Datum: AGD66, GDA94, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Paper, flat and folded copies.

This map is part of the series that covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 513 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and 110 kilometres from north to south. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. The topographic map and data index shows coverage of the sheets. Product Specifications Coverage: The series covers the whole of Australia with 513 maps. Currency: Ranges from 1995 to 2009. 95% of maps have a reliability date of 1994 or later. Coordinates: Geographical and either AMG or MGA (post-1993) Datum: AGD66, GDA94, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Paper, flat and folded copies.

This map is part of the series that covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 513 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and 110 kilometres from north to south. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. The topographic map and data index shows coverage of the sheets. Product Specifications Coverage: The series covers the whole of Australia with 513 maps. Currency: Ranges from 1995 to 2009. 95% of maps have a reliability date of 1994 or later. Coordinates: Geographical and either AMG or MGA (post-1993) Datum: AGD66, GDA94, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Paper, flat and folded copies.

This map is part of the series that covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 513 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and 110 kilometres from north to south. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. The topographic map and data index shows coverage of the sheets. Product Specifications Coverage: The series covers the whole of Australia with 513 maps. Currency: Ranges from 1995 to 2009. 95% of maps have a reliability date of 1994 or later. Coordinates: Geographical and either AMG or MGA (post-1993) Datum: AGD66, GDA94, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Paper, flat and folded copies.

This map is part of the series that covers the whole of Australia at a scale of 1:250 000 (1cm on a map represents 2.5 km on the ground) and comprises 513 maps. This is the largest scale at which published topographic maps cover the entire continent. Each standard map covers an area of 1.5 degrees longitude by 1 degree latitude or about 150 kilometres from east to west and 110 kilometres from north to south. There are about 50 special maps in the series and these maps cover a non-standard area. Typically, where a map produced on standard sheet lines is largely ocean it is combined with its landward neighbour. These maps contain natural and constructed features including road and rail infrastructure, vegetation, hydrography, contours (interval 50m), localities and some administrative boundaries. The topographic map and data index shows coverage of the sheets. Product Specifications Coverage: The series covers the whole of Australia with 513 maps. Currency: Ranges from 1995 to 2009. 95% of maps have a reliability date of 1994 or later. Coordinates: Geographical and either AMG or MGA (post-1993) Datum: AGD66, GDA94, AHD. Projection: Universal Traverse Mercator (UTM) Medium: Paper, flat and folded copies.